米6体育平台手机版

ZHCSOI5A October 2021 – November 2024 ADC12DJ1600 , ADC12QJ1600 , ADC12SJ1600

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

AAV|144
- MPBGAM2C

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

		MIN	MAX	UNIT
Supply voltage range	VA19⁽²⁾	–0.3	2.35	V
	VPLL19⁽³⁾	–0.3	2.35
	VREFO⁽²⁾	–0.3	2.35
	VTRIG⁽⁵⁾	–0.3	2.35
	VA11⁽²⁾	–0.3	1.32⁽¹¹⁾
	VD11⁽⁵⁾	–0.3	1.32⁽¹¹⁾
	Voltage difference between any 1.9 V supply (VA19, VPLL19 or VREFO)	–0.5	0.5
Voltage between AGND, DGND, PGND and SE_GND		–0.1	0.1	V
Pin voltage range	D[7:0]+, D[7:0]–, TMSTP+, TMSTP–⁽⁵⁾	–0.5	VD11 + 0.5⁽⁷⁾	V
	CLK+, CLK–, SYSREF+, SYSREF–⁽²⁾	–0.5	VA11 + 0.5⁽⁶⁾
	SE_CLK⁽⁴⁾	–0.5	VA19 + 0.5⁽⁸⁾
	PLLREFO+, PLLREFO–⁽²⁾	–0.5	VREFO + 0.5⁽⁹⁾
	TRIGOUT+,TRIGOUT–⁽⁵⁾	–0.5	VTRIG + 0.5⁽¹⁰⁾
	BG, TDIODE+, TDIODE–⁽²⁾	–0.5	VA19 + 0.5⁽⁸⁾
	INA+, INA–, INB+, INB–, INC+, INC–, IND+, IND–⁽²⁾	VA11 – 1.0	VA11 + 1.0
	CALSTAT, CALTRIG, CLKCFG0, CLKCFG1, PLL_EN, PLLREF_SE, ORA, ORB, ORC, ORD, PD, SCLK, SCS, SDI, SDO, SYNCSE⁽²⁾	–0.5	VA19 + 0.5⁽⁸⁾
Peak input current (any input except INA+, INA–, INB+, INB–, INC+, INC–, IND+, IND–)		–25	25	mA
Peak input current (INA+, INA–, INB+, INB–, INC+, INC–, IND+, IND–)		–50	50	mA
Peak RF input power (INA+, INA–, INB+, INB–, INC+, INC–, IND+, IND–)	Single-ended with Z_S-SE = 50 Ω		16.4	dBm
Peak total input current (sum of absolute value of all currents forced in or out, not including power-supply current)			100	mA
Operating junction temperature, T_j		–40	150	°C
Storage temperature, T_stg		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) Measured to AGND.

(3) Measured to PGND.

(4) Measured to SE_GND.

(5) Measured to DGND.

(6) Maximum voltage not to exceed VA11 absolute maximum rating.

(7) Maximum voltage not to exceed VD11 absolute maximum rating.

(8) Maximum voltage not to exceed VA19 absolute maximum rating.

(9) Maximum voltage not to exceed VREFO absolute maximum rating.

(10) Maximum voltage not to exceed VTRIG absolute maximum rating.

(11) The 1.1-V supplies (VA11, VD11) must not be more than 0.5 V above any of the 1.9-V supplies (VA19, VPLL19, VREFO) or VTRIG (1.1 V or 1.9 V) during power up, normal operation or power down. See Power Sequencing section.