ZHCSCD9C April 2014 – August 2014 ADC16DX370
PRODUCTION DATA.
Unless otherwise noted, these specifications apply for all supply and temperature conditions.
PARAMETER | DESCRIPTION AND TEST CONDITIONS | VALUE | UNIT | |
---|---|---|---|---|
OVRTH | Over-range detection threshold Configurable via SPI |
–48.16 (min) and 0 (max) | dBFS | |
OVRTHS | Over-range detection threshold step Expressed as the change in the total code range outside of which an over-range event occurs. Half of the step value is changed at the upper boundary of the code range and half is changed at the lower boundary. |
256 | codes |
Unless otherwise noted, these specifications apply for VA3.0 = 3.0 V; VA1.8 = 1.8 V; VA1.2 = VD1.2 = 1.2 V; FCLKIN = FS = 370 MSPS. Typical values are at TA = +25°C.
PARAMETER | DESCRIPTION AND TEST CONDITIONS | TYP | LIMIT | UNIT | |
---|---|---|---|---|---|
CLKDIV | Input CLKIN divider factor Configurable via SPI |
1 (default), 2, 4, or 8 | |||
NФC | Number of available coarse phase adjustment steps | 2 × CLKDIV | |||
ФC | Nominal CLKIN coarse phase adjustment step Coarse step of CLKIN divider phase adjustment range; common to both channels; depends on clock divider factor (CLKDIV) and sampling rate (FS). |
1 / (2 × CLKDIV × FS) | s | ||
ΔФC | Typical coarse phase adjustment step error(1)
Percent variation of actual phase adjustment step relative to the nominal step (ФC). Assumes ideal 50% CLKIN duty cycle |
||||
CLKDIV = 8, FS = 250 MSPS | ±6% | ||||
CLKDIV = 4, FS = 370 MSPS | ±4% |
Unless otherwise noted, these specifications apply for all supply and temperature conditions.
PARAMETER | DESCRIPTION AND TEST CONDITIONS | VALUE | |
---|---|---|---|
LSF | Supported configurations L = Number of lanes/converter S = Samples per frame F = Octets per frame |
L = 1, S = 1, F = 2 or L = 2, S = 1, F = 1 |
|
K | Number of frames per multi-frame Configurable via SPI |
||
L = 1, S = 1, F = 2 | 9 (min) 32 (max, default) |
||
L = 2, S = 1, F = 1 | 17 (min) 32 (max, default) |