ZHCSOP2 August 2022 ADS131M06-Q1
PRODUCTION DATA
PIN | I/O | DESCRIPTION(1) | |
---|---|---|---|
NAME | NO. | ||
AGND | 13, 28 | Supply | Analog ground |
AIN0N | 30 | Analog input | Negative analog input 0 |
AIN0P | 29 | Analog input | Positive analog input 0 |
AIN1N | 31 | Analog input | Negative analog input 1 |
AIN1P | 32 | Analog input | Positive analog input 1 |
AIN2N | 2 | Analog input | Negative analog input 2 |
AIN2P | 1 | Analog input | Positive analog input 2 |
AIN3N | 3 | Analog input | Negative analog input 3 |
AIN3P | 4 | Analog input | Positive analog input 3 |
AIN4N | 6 | Analog input | Negative analog input 4 |
AIN4P | 5 | Analog input | Positive analog input 4 |
AIN5N | 7 | Analog input | Negative analog input 5 |
AIN5P | 8 | Analog input | Positive analog input 5 |
AVDD | 15 | Supply | Analog supply. Connect a 1-µF capacitor to AGND. |
CAP | 24 | Analog output | Digital low-dropout (LDO) regulator output. Connect a 220-nF capacitor to DGND. |
CS | 17 | Digital input | Chip select; active low |
DGND | 25 | Supply | Digital ground |
DIN | 21 | Digital input | Serial data input |
DOUT | 20 | Digital output | Serial data output |
DRDY | 18 | Digital output | Data ready; active low |
DVDD | 26 | Supply | Digital I/O supply. Connect a 1-µF capacitor to DGND. |
NC | 9-12 | — | Leave unconnected or connect to AGND |
NC | 27 | — | Leave unconnected or connect to AGND |
REFIN | 14 | Analog input | External reference voltage input. (2) |
SCLK | 19 | Digital input | Serial data clock |
SYNC/RESET | 16 | Digital input | Conversion synchronization or system reset; active low |
XTAL1/CLKIN | 23 | Digital input | Main clock input, or crystal oscillator input |
XTAL2 | 22 | Digital output | Crystal oscillator excitation(3) |