ZHCSEE2B December   2015  – January 2023 ADS54J66

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics
    6. 6.6  AC Performance
    7. 6.7  Digital Characteristics
    8. 6.8  Timing Requirements
    9. 6.9  Typical Characteristics: General (DDC Mode-8)
    10. 6.10 Typical Characteristics: Mode 2
    11. 6.11 Typical Characteristics: Mode 0
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Analog Inputs
      2. 7.3.2 Recommended Input Circuitry
    4. 7.4 Device Functional Modes
      1. 7.4.1 Digital Features
      2. 7.4.2 Mode 0, Decimation-by-2 with IQ Outputs for up to 220 MHz of IQ Bandwidth
      3. 7.4.3 Mode 2, Decimation-by-2 for up to 110 MHz of Real Bandwidth
      4. 7.4.4 Modes 4 and 7, Decimation-by-2 with Real Outputs for up to 110 MHz of Bandwidth
      5. 7.4.5 Mode 5, Decimation-by-2 with IQ Outputs for up to 110 MHz of IQ Bandwidth
      6. 7.4.6 Mode 6, Decimation-by-4 with IQ Outputs for up to 110 MHz of IQ Bandwidth
      7. 7.4.7 Overrange Indication
      8. 7.4.8 Power-Down Mode
    5. 7.5 Programming
      1. 7.5.1 Device Configuration
        1. 7.5.1.1 Details of the Serial Interface
        2. 7.5.1.2 Serial Register Write: Analog Bank
        3. 7.5.1.3 Serial Register Readout: Analog Bank
        4. 7.5.1.4 JESD Bank SPI Page Selection
        5. 7.5.1.5 Serial Register Write: Digital Bank
        6. 7.5.1.6 Individual Channel Programming
        7. 7.5.1.7 Serial Register Readout: JESD Bank
      2. 7.5.2 JESD204B Interface
        1. 7.5.2.1 JESD204B Initial Lane Alignment (ILA)
        2. 7.5.2.2 JESD204B Frame Assembly
        3. 7.5.2.3 JESD Output Switch
          1. 7.5.2.3.1 SERDES Transmitter Interface
          2. 7.5.2.3.2 SYNCb Interface
          3. 7.5.2.3.3 Eye Diagram
    6. 7.6 Register Maps
      1. 7.6.1 Detailed Register Information
      2. 7.6.2 Example Register Writes
      3. 7.6.3 Register Descriptions
        1. 7.6.3.1 General Registers
          1. 7.6.3.1.1 Register 0h (offset = 0h) [reset = 0h]
          2. 7.6.3.1.2 Register 3h, 4h (offset = 3h, 4h) [reset = 0h]
          3. 7.6.3.1.3 Register 5h (offset = 5h) [reset = 0h]
          4. 7.6.3.1.4 Register 11h (offset = 11h) [reset = 0h]
        2. 7.6.3.2 Master Page (80h)
          1. 7.6.3.2.1  Register 20h (address = 20h) [reset = 0h], Master Page (080h)
          2. 7.6.3.2.2  Register 21h (address = 21h) [reset = 0h], Master Page (080h)
          3. 7.6.3.2.3  Register 23h (address = 23h), Master Page (080h)
          4. 7.6.3.2.4  Register 24h (address = 24h) [reset = 0h], Master Page (080h)
          5. 7.6.3.2.5  Register 26h (address = 26h), Master Page (080h)
          6. 7.6.3.2.6  Register 3Ah (address = 3Ah) [reset = 0h], Master Page (80h)
          7. 7.6.3.2.7  Register 39h (address = 39h) [reset = 0h], Master Page (80h)
          8. 7.6.3.2.8  Register 53h (address = 53h) [reset = 0h], Master Page (80h)
          9. 7.6.3.2.9  Register 54h (address = 54h) [reset = 0h], Master Page (80h)
          10. 7.6.3.2.10 Register 55h (address = 55h) [reset = 0h], Master Page (80h)
          11. 7.6.3.2.11 Register 56h (address = 56h) [reset = 0h], Master Page (80h)
          12. 7.6.3.2.12 Register 59h (address = 59h) [reset = 0h], Master Page (80h)
        3. 7.6.3.3 ADC Page (0Fh)
          1. 7.6.3.3.1  Register 5Fh (address = 5Fh) [reset = 0h], ADC Page (0Fh)
          2. 7.6.3.3.2  Register 60h (address = 60h) [reset = 0h], ADC Page (0Fh)
          3. 7.6.3.3.3  Register 61h (address = 61h) [reset = 0h], ADC Page (0Fh)
          4. 7.6.3.3.4  Register 6Ch (address = 6Ch) [reset = 0h], ADC Page (0Fh)
          5. 7.6.3.3.5  Register 6Dh (address = 6Dh) [reset = 0h], ADC Page (0Fh)
          6. 7.6.3.3.6  Register 74h (address = 74h) [reset = 0h], ADC Page (0Fh)
          7. 7.6.3.3.7  Register 75h (address = 75h) [reset = 0h], ADC Page (0Fh)
          8. 7.6.3.3.8  Register 76h (address = 76h) [reset = 0h], ADC Page (0Fh)
          9. 7.6.3.3.9  Register 77h (address = 77h) [reset = 0h], ADC Page (0Fh)
          10. 7.6.3.3.10 Register 78h (address = 78h) [reset = 0h], ADC Page (0Fh)
        4. 7.6.3.4 Interleaving Engine Page (6100h)
          1. 7.6.3.4.1 Register 18h (address = 18h) [reset = 0h], Interleaving Engine Page (6100h)
          2. 7.6.3.4.2 Register 68h (address = 68h) [reset = 0h], Interleaving Engine Page (6100h)
        5. 7.6.3.5 Decimation Filter Page (6141h) Registers
          1. 7.6.3.5.1 Register 0h (address = 0h) [reset = 0h], Decimation Filter Page (6141h)
          2. 7.6.3.5.2 Register 1h (address = 1h) [reset = 0h], Decimation Filter Page (6141h)
          3. 7.6.3.5.3 Register 2h (address = 2h) [reset = 0h], Decimation Filter Page (6141h)
        6. 7.6.3.6 Main Digital Page (6800h) Registers
          1. 7.6.3.6.1 Register 0h (address = 0h) [reset = 0h], Main Digital Page (6800h)
          2. 7.6.3.6.2 Register 42h (address = 42h) [reset = 0h], Main Digital Page (6800h)
          3. 7.6.3.6.3 Register 4Eh (address = 4Eh) [reset = 0h], Main Digital Page (6800h)
          4. 7.6.3.6.4 Register ABh (address = ABh) [reset = 0h], Main Digital Page (6800h)
          5. 7.6.3.6.5 Register ADh (address = ADh) [reset = 0h], Main Digital Page (6800h)
          6. 7.6.3.6.6 Register F7h (address = F7h) [reset = 0h], Main Digital Page (68h)
        7. 7.6.3.7 JESD Digital Page (6900h) Registers
          1. 7.6.3.7.1 Register 0h (address = 0h) [reset = 0h], JESD Digital Page (6900h)
          2. 7.6.3.7.2 Register 1h (address = 1h) [reset = 0h], JESD Digital Page (6900h)
          3. 7.6.3.7.3 Register 2h (address = 2h) [reset = 0h], JESD Digital Page (6900h)
          4. 7.6.3.7.4 Register 3h (address = 3h) [reset = 0h], JESD Digital Page (6900h)
          5. 7.6.3.7.5 Register 5h (address = 5h) [reset = 0h], JESD Digital Page (6900h)
          6. 7.6.3.7.6 Register 6h (address = 6h) [reset = 0h], JESD Digital Page (6900h)
          7. 7.6.3.7.7 Register 21h (address = 21h) [reset = 0h], JESD Digital Page (6900h)
          8. 7.6.3.7.8 Register 22h (address = 22h) [reset = 0h], JESD Digital Page (6900h)
        8. 7.6.3.8 JESD Analog Page (6A00h) Register
          1. 7.6.3.8.1 Register 12h, 13h (address 12h, 13h) [reset = 0h], JESD Analog Page (6Ah)
          2. 7.6.3.8.2 Register 16h (address = 16h) [reset = 0h], JESD Analog Page (6A00h)
          3. 7.6.3.8.3 Register 17h (address = 17h) [reset = 0h], JESD Analog Page (6A00h)
          4. 7.6.3.8.4 Register 1Bh (address = 1Bh) [reset = 0h], JESD Analog Page (6A00h)
  8. 8 Application Information Disclaimer
    1. 8.1 Application Information
      1. 8.1.1 Start-Up Sequence
      2. 8.1.2 Hardware Reset
        1. 8.1.2.1 Register Initialization
        2. 8.1.2.2 115
      3. 8.1.3 SYSREF Signal
      4. 8.1.4 SNR and Clock Jitter
      5. 8.1.5 Idle Channel Histogram
      6. 8.1.6 ADC Test Pattern
        1. 8.1.6.1 ADC Section
        2. 8.1.6.2 Transport Layer Pattern
        3. 8.1.6.3 Link Layer Pattern
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
      1. 8.3.1 Power Sequencing and Initialization
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  9. 9 Device and Documentation Support
    1. 9.1 接收文档更新通知
    2. 9.2 支持资源
    3. 9.3 商标
    4. 9.4 Electrostatic Discharge Caution
    5. 9.5 术语表
  10. 10Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.1.1 Start-Up Sequence

The following steps are recommended as the power-up sequence with the ADS54J66 in DDC mode 8 (no decimation) with LMFS = 4421 (shown in Table 8-1).

Table 8-1 Recommended Power-Up Sequence
STEPDESCRIPTIONREGISTER ADDRESSREGISTER DATACOMMENT
1Power up the IOVDD 1.15-V supply before the 1.9-V supply. All other supplies (AVDD 1.9-V and AVDD 3-V supply) can be supplied in any order.———
2Pulse a hardware reset (low to high to low) on pin 48.———
Alternatively, the device can be reset with an analog reset and a digital reset.0000h
4004h
4003h
4002h
4001h
60F7h
60F7h
70F7h
70F7h		81h
68h
00h
00h
00h
01h
00h
01h
00h		—
3Set the input clock divider.0011h
0053h
0039h
0059h		80h
80h
C0h
20h		Select the master page in the analog bank.
Set the clock divider to divide-by-2.
Set the ALWAYS WRITE 1 bit for all channels.
Set the ALWAYS WRITE 1 bit for all channels.
4Reset the interleaving correction engine in register 6800h of the main digital page of the JESD bank. (Register access is already set to page 6800h in step 2.)6000h
6000h
7000h
7000h		01h
00h
01h
00h		Resets the interleaving engine for channel A, B (because the device is in broadcast mode).
Resets the interleaving engine for channel C, D (because the device is in broadcast mode).
5Set DDC mode 8 for all channels (no decimation, 14-bit, 500-MSPS data output).4004h
4003h		61h
41h		Select the decimation filter page of the JESD bank.
6000h
7000h		08h
08h		Select DDC mode 8 for channel A, B.
Select DDC mode 8 for channel C, D.
6001h
7001h		04h
04h		Set the ALWAYS WRITE 1 bit for channel A, B.
Set the ALWAYS WRITE 1 bit for channel C, D.
6Default registers for the analog page of the JESD bank.4003h
4004h		00h
6Ah		Select the analog page in the JESD bank.
6016h
7016h		02h
02h		PLL mode 40x for channel A, B.
PLL mode 40x for channel C, D.
7Default registers for the digital page of the JESD bank.4003h
4004h		00h
69h		Select the digital page in the JESD bank.
6000h
6001h
7000h
7001h		20h
01h
20h
01h		Enable JESD MODE control for channel A, B.
Set JESD MODE to 20x mode for LMFS = 4421.
Enable JESD MODE control for channel C, D.
Set JESD MODE to 20x mode for LMFS = 4421.
6000h
6006h
7000h
7006h		80h
0Fh
80h
0Fh		Set CTRL K for channel A, B.
Set K to 16.
Set CTRL K for channel C, D.
Set K to 16.
8Enable a single SYNCb input (on the SYNCbAB pin).4005h
7001h		01h
20h		Disable broadcast mode.
Use SYNCbABP, SYNCbABM to issue a SYNC request for all four channels.
9Pulse SYNCbAB (pins 55 and 56) from high to low.——K28.5 characters are transmitted by all four channels (CGS phase).
10Pulse SYNCbAB (pins 55 and 56) from low to high.——The ILA sequence begins and lasts for four multiframes. The device transmits ADC data after the ILA sequence ends.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |