ZHCSFY7B January   2017  – December 2021 ADS58J64

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics
    6. 6.6  AC Performance
    7. 6.7  Digital Characteristics
    8. 6.8  Timing Characteristics
    9. 6.9  Typical Characteristics: 14-Bit Burst Mode
    10. 6.10 Typical Characteristics: Mode 2
    11. 6.11 Typical Characteristics: Mode 0
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Analog Inputs
      2. 7.3.2 Recommended Input Circuit
      3. 7.3.3 Clock Input
    4. 7.4 Device Functional Modes
      1. 7.4.1 Digital Features
        1. 7.4.1.1  Numerically Controlled Oscillators (NCOs) and Mixers
        2. 7.4.1.2  Decimation Filter
          1. 7.4.1.2.1 Stage-1 Filter
          2. 7.4.1.2.2 Stage-2 Filter
        3. 7.4.1.3  Mode 0: Decimate-by-4 With IQ Outputs and fS / 4 Mixer
        4. 7.4.1.4  Mode 1: Decimate-by-4 With IQ Outputs and 16-Bit NCO
        5. 7.4.1.5  Mode 2: Decimate-by-4 With Real Output
        6. 7.4.1.6  Mode 3: Decimate-by-2 Real Output With Frequency Shift
        7. 7.4.1.7  Mode 4: Decimate-by-4 With Real Output
        8. 7.4.1.8  Mode 6: Decimate-by-4 With IQ Outputs for up to 110 MHz of IQ Bandwidth
        9. 7.4.1.9  Mode 7: Decimate-by-4 With Real Output and Zero Stuffing
        10. 7.4.1.10 Mode 8: Burst Mode
        11. 7.4.1.11 Trigger Input
        12. 7.4.1.12 Manual Trigger Mode
        13. 7.4.1.13 Auto Trigger Mode
        14. 7.4.1.14 Overrange Indication
    5. 7.5 Programming
      1. 7.5.1 JESD204B Interface
      2. 7.5.2 JESD204B Initial Lane Alignment (ILA)
      3. 7.5.3 JESD204B Frame Assembly
      4. 7.5.4 JESD Output Switch
        1. 7.5.4.1 SerDes Transmitter Interface
        2. 7.5.4.2 SYNCb Interface
        3. 7.5.4.3 Eye Diagram
      5. 7.5.5 Device Configuration
        1. 7.5.5.1 Details of the Serial Interface
          1. 7.5.5.1.1 Register Initialization
        2. 7.5.5.2 Serial Register Write
        3. 7.5.5.3 Serial Read
    6. 7.6 Register Maps
      1. 7.6.1 Register Map
        1. 7.6.1.1 Register Description
          1. 7.6.1.1.1 GLOBAL Page Register Description
            1. 7.6.1.1.1.1 Register 00h (address = 00h) [reset = 0h], GLOBAL Page
            2. 7.6.1.1.1.2 Register 04h (address = 04h) [reset = 0h], GLOBAL Page
            3. 7.6.1.1.1.3 Register 11h (address = 11h) [reset = 0h], GLOBAL Page
            4. 7.6.1.1.1.4 Register 12h (address = 12h) [reset = 0h], GLOBAL Page
            5. 7.6.1.1.1.5 Register 13h (address = 13h) [reset = 0h], GLOBAL Page
          2. 7.6.1.1.2 DIGTOP Page Register Description
            1. 7.6.1.1.2.1  Register 64h (address = 64h) [reset = 0h], DIGTOP Page
            2. 7.6.1.1.2.2  Register 8Dh (address = 8Dh) [reset = 0h], DIGTOP Page
            3. 7.6.1.1.2.3  Register 8Eh (address = 8Eh) [reset = 0h], DIGTOP Page
            4. 7.6.1.1.2.4  Register 8Fh (address = 8Fh) [reset = 0h], DIGTOP Page
            5. 7.6.1.1.2.5  Register 90h (address = 90h) [reset = 0h], DIGTOP Page
            6. 7.6.1.1.2.6  Register 91h (address = 91h) [reset = 0h], DIGTOP Page
            7. 7.6.1.1.2.7  Register ABh (address = ABh) [reset = 0h], DIGTOP Page
            8. 7.6.1.1.2.8  Register ACh (address = ACh) [reset = 0h], DIGTOP Page
            9. 7.6.1.1.2.9  Register ADh (address = ADh) [reset = 0h], DIGTOP Page
            10. 7.6.1.1.2.10 Register AEh (address = AEh) [reset = 0h], DIGTOP Page
            11. 7.6.1.1.2.11 Register B7h (address = B7h) [reset = 0h], DIGTOP Page
          3. 7.6.1.1.3 ANALOG Page Register Description
            1. 7.6.1.1.3.1  Register 6Ah (address = 6Ah) [reset = 0h], ANALOG Page
            2. 7.6.1.1.3.2  Register 6Fh (address = 6Fh) [reset = 0h], ANALOG Page
            3. 7.6.1.1.3.3  Register 71h (address = 71h) [reset = 0h], ANALOG Page
            4. 7.6.1.1.3.4  Register 72h (address = 72h) [reset = 0h], ANALOG Page
            5. 7.6.1.1.3.5  Register 93h (address = 93h) [reset = 0h], ANALOG Page
            6. 7.6.1.1.3.6  Register 94h (address = 94h) [reset = 0h], ANALOG Page
            7. 7.6.1.1.3.7  Register 9Bh (address = 9Bh) [reset = 0h], ANALOG Page
            8. 7.6.1.1.3.8  Register 9Dh (address = 9Dh) [reset = 0h], ANALOG Page
            9. 7.6.1.1.3.9  Register 9Eh (address = 9Eh) [reset = 0h], ANALOG Page
            10. 7.6.1.1.3.10 Register 9Fh (address = 9Fh) [reset = 0h], ANALOG Page
            11. 7.6.1.1.3.11 Register AFh (address = AFh) [reset = 0h], ANALOG Page
          4. 7.6.1.1.4 SERDES_XX Page Register Description
            1. 7.6.1.1.4.1  Register 20h (address = 20h) [reset = 0h], SERDES_XX Page
            2. 7.6.1.1.4.2  Register 21h (address = 21h) [reset = 0h], SERDES_XX Page
            3. 7.6.1.1.4.3  Register 22h (address = 22h) [reset = 0h], SERDES_XX Page
            4. 7.6.1.1.4.4  Register 23h (address = 23h) [reset = 0h], SERDES_XX Page
            5. 7.6.1.1.4.5  Register 25h (address = 25h) [reset = 0h], SERDES_XX Page
            6. 7.6.1.1.4.6  Register 26h (address = 26h) [reset = 0h], SERDES_XX Page
            7. 7.6.1.1.4.7  Register 28h (address = 28h) [reset = 0h], SERDES_XX Page
            8. 7.6.1.1.4.8  Register 2Dh (address = 2Dh) [reset = 0h], SERDES_XX Page
            9. 7.6.1.1.4.9  Register 36h (address = 36h) [reset = 0h], SERDES_XX Page
            10. 7.6.1.1.4.10 Register 37h (address = 37h) [reset = 0h], SERDES_XX Page
            11. 7.6.1.1.4.11 Register 39h (address = 39h) [reset = 0h], SERDES_XX Page
            12. 7.6.1.1.4.12 Register 3Ah (address = 3Ah) [reset = 0h], SERDES_XX Page
            13. 7.6.1.1.4.13 Register 3Bh (address = 3Bh) [reset = 0h], SERDES_XX Page
            14. 7.6.1.1.4.14 Register 3Ch (address = 3Ch) [reset = 0h], SERDES_XX Page
            15. 7.6.1.1.4.15 Register 3Dh (address = 3Dh) [reset = 0h], SERDES_XX Page
            16. 7.6.1.1.4.16 Register 3Eh (address = 3Eh) [reset = 0h], SERDES_XX Page
            17. 7.6.1.1.4.17 Register 3Fh (address = 3Fh) [reset = 0h], SERDES_XX Page
            18. 7.6.1.1.4.18 Register 40h (address = 40h) [reset = 0h], SERDES_XX Page
            19. 7.6.1.1.4.19 Register 41h (address = 41h) [reset = 0h], SERDES_XX Page
            20. 7.6.1.1.4.20 Register 42h (address = 42h) [reset = 0h], SERDES_XX Page
          5. 7.6.1.1.5 CHX Page Register Description
            1. 7.6.1.1.5.1 Register 26h (address = 26h) [reset = 0h], CHX Page
            2. 7.6.1.1.5.2 Register 27h (address = 27h) [reset = 0h], CHX Page
            3. 7.6.1.1.5.3 Register 2Dh (address = 2Dh) [reset = 0h], CHX Page
            4. 7.6.1.1.5.4 Register 78h (address = 78h) [reset = 0h], CHX Page
            5. 7.6.1.1.5.5 Register 7Ah (address = 7Ah) [reset = 0h], CHX Page
            6. 7.6.1.1.5.6 Register 7Bh (address = 7Bh) [reset = 0h], CHX Page
            7. 7.6.1.1.5.7 Register 7Eh (address = 7Eh) [reset = 3h], CHX Page
          6. 7.6.1.1.6 ADCXX Page Register Description
            1. 7.6.1.1.6.1 Register 07h (address = 07h) [reset = FFh], ADCXX Page
            2. 7.6.1.1.6.2 Register 08h (address = 08h) [reset = 0h], ADCXX Page
            3. 7.6.1.1.6.3 Register D5h (address = D5h) [reset = 0h], ADCXX Page
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Start-Up Sequence
      2. 8.1.2 Hardware Reset
      3. 8.1.3 Frequency Planning
      4. 8.1.4 SNR and Clock Jitter
      5. 8.1.5 ADC Test Pattern
        1. 8.1.5.1 ADC Section
        2. 8.1.5.2 Transport Layer Pattern
        3. 8.1.5.3 Link Layer Pattern
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 接收文档更新通知
    2. 11.2 支持资源
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 术语表
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5 Pin Configuration and Functions

Figure 5-1 RMP or RHH Package72-Pin VQFNTop View
Table 5-1 Pin Functions
PIN I/O DESCRIPTION
NAME NO.
INPUT, REFERENCE
INAM 41 I Differential analog input pin for channel A, internal bias via a 2-kΩ resistor to VCM
INAP 42
INBM 37 I Differential analog input pin for channel B, internal bias via a 2-kΩ resistor to VCM
INBP 36
INCM 18 I Differential analog input pin for channel C, internal bias via a 2-kΩ resistor to VCM
INCP 19
INPUT, REFERENCE (continued)
INDM 14 I Differential analog input pin for channel D, internal bias via a 2-kΩ resistor to VCM
INDP 13
CLOCK, SYNC
CLKINM 28 I Differential clock input pin for the ADC with internal 100-Ω differential termination, requires external ac coupling
CLKINP 27
SYSREFM 34 I External SYSREF input, requires dc coupling and external termination
SYSREFP 33
CONTROL, SERIAL
NC 22, 23 — No connection
PDN 50 I/O Power down. This pin can be configured via an SPI register setting. This pin has an internal 10-kΩ pulldown resistor.
RES 49 — Reserved pin, connect to GND
RESET 48 I Hardware reset; active high. This pin has an internal 10-kΩ pulldown resistor.
SCLK 6 I Serial interface clock input. This pin has an internal 10-kΩ pulldown resistor.
SDIN 5 I Serial interface data input. This pin has an internal 10-kΩ pulldown resistor.
SDOUT 11 O 1.8-V logic serial interface data output
SEN 7 I Serial interface enable. This pin has an internal 10-kΩ pullup resistor to DVDD.
TRDYAB 54 O Trigger-ready output for burst mode for channels A and B. This pin can be configured via SPI to a TRDY signal for all four channels in burst mode, and can be left open if not used.
TRDYCD 1 O Trigger-ready output for burst mode for channels C and D. This pin can be configured via SPI to a TRDY signal for all four channels in burst mode, and can be left open if not used.
TRIGAB 53 I Manual burst mode trigger input for channels A and B. This pin can be configured via SPI to a manual trigger input signal for all four channels in burst mode, and can be connected to GND if not used. This pin has an internal 10-kΩ pulldown resistor.
TRIGCD 2 I Manual burst mode trigger input for channels C and D. This pin can be configured via SPI to a manual trigger input signal for all four channels in burst mode, and can be connected to GND if not used. This pin has an internal 10-kΩ pulldown resistor.
DATA INTERFACE
DAM 59 O JESD204B serial data output pin for channel A
DAP 58
DBM 62 O JESD204B serial data output pin for channel B
DBP 61
DCM 65 O JESD204B serial data output pin for channel C
DCP 66
DDM 68 O JESD204B serial data output pin for channel D
DDP 69
SYNCbABM 56 I Synchronization input pin for JESD204B port channels A and B. This pin can be configured via SPI to a SYNCb signal for all four channels. This pin has an internal differential termination of 100 Ω.
SYNCbABP 55
SYNCbCDM 71 I Synchronization input pin for JESD204B port channels C and D. This pin can be configured via SPI to a SYNCb signal for all four channels. This pin has an internal differential termination of 100 Ω..
SYNCbCDP 72
POWER SUPPLY
AGND 21, 26, 29, 32 I Analog ground
AVDD 9, 12, 15, 17, 20, 25, 30, 35, 38, 40, 43, 44, 46 I Analog 1.15-V power supply
AVDD19 10, 16, 24, 31, 39, 45 I Analog 1.9-V supply for analog buffer
DGND 3, 52, 60, 63, 67 I Digital ground
DVDD 4, 8, 47,51, 57, 64, 70 I Digital 1.15-V power supply
Thermal pad — Connect to GND
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |