ZHCSCR1B July   2014  – August 2014 ADS8684 , ADS8688

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 修订历史记录
  5. 5 Device Comparison Table
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 Handling Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Requirements: Serial Interface
    7. 7.7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Analog Inputs
      2. 8.3.2  Analog Input Impedance
      3. 8.3.3  Input Overvoltage Protection Circuit
      4. 8.3.4  Programmable Gain Amplifier (PGA)
      5. 8.3.5  Second-Order, Low-Pass Filter (LPF)
      6. 8.3.6  ADC Driver
      7. 8.3.7  Multiplexer (MUX)
      8. 8.3.8  Reference
        1. 8.3.8.1 Internal Reference
        2. 8.3.8.2 External Reference
      9. 8.3.9  Auxiliary Channel
        1. 8.3.9.1 Input Driver for the AUX Channel
      10. 8.3.10 ADC Transfer Function
    4. 8.4 Device Functional Modes
      1. 8.4.1 Device Interface
        1. 8.4.1.1 Digital Pin Description
          1. 8.4.1.1.1 CS (Input)
          2. 8.4.1.1.2 SCLK (Input)
          3. 8.4.1.1.3 SDI (Input)
          4. 8.4.1.1.4 SDO (Output)
          5. 8.4.1.1.5 DAISY (Input)
          6. 8.4.1.1.6 RST/PD (Input)
        2. 8.4.1.2 Data Acquisition Example
        3. 8.4.1.3 Host-to-Device Connection Topologies
          1. 8.4.1.3.1 Daisy-Chain Topology
          2. 8.4.1.3.2 Star Topology
      2. 8.4.2 Device Modes
        1. 8.4.2.1 Continued Operation in the Selected Mode (NO_OP)
        2. 8.4.2.2 Frame Abort Condition (FRAME_ABORT)
        3. 8.4.2.3 STANDBY Mode (STDBY)
        4. 8.4.2.4 Power-Down Mode (PWR_DN)
        5. 8.4.2.5 Auto Channel Enable with Reset (AUTO_RST)
        6. 8.4.2.6 Manual Channel n Select (MAN_Ch_n)
        7. 8.4.2.7 Channel Sequencing Modes
        8. 8.4.2.8 Reset Program Registers (RST)
    5. 8.5 Register Map
      1. 8.5.1 Command Register Description
      2. 8.5.2 Program Register Description
        1. 8.5.2.1 Program Register Read/Write Operation
        2. 8.5.2.2 Program Register Map
        3. 8.5.2.3 Auto-Scan Sequencing Control Registers
          1. 8.5.2.3.1 Auto-Scan Sequence Enable Register (address = 01h)
          2. 8.5.2.3.2 Channel Power Down Register (address = 02h)
        4. 8.5.2.4 Device Features Selection Control Register (address = 03h)
        5. 8.5.2.5 Range Select Registers (address = 05h (channel 0), 06h (channel 1), 07h (channel 2), 08h (channel 3), 09h (channel 4), 0Ah (channel 5), 0Bh (channel 6), 0Ch (channel 7))
      3. 8.5.3 Command Read-Back Register (address = 3Fh)
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 Phase-Compensated, 8-Channel, Multiplexed Data Acquisition System for Power Automation
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
        3. 9.2.1.3 Application Curve
      2. 9.2.2 16-Bit, 8-Channel, Integrated Analog Input Module for Programmable Logic Controllers (PLCs)
        1. 9.2.2.1 Design Requirements
        2. 9.2.2.2 Detailed Design Procedure
        3. 9.2.2.3 Application Curve
  10. 10Power-Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 文档支持
      1. 12.1.1 相关文档　
    2. 12.2 相关链接
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 术语表
  13. 13机械封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Pin Configuration and Functions

DBT Package
TSSOP-38
(Top View, Not to Scale)
po_ads8684_ads8688_sbas582.gif

Pin Functions

PIN I/O DESCRIPTION
NO. NAME
ADS8684 ADS8688
1 SDI Digital input Data input for serial communication.
2 RST/PD Digital input Active low logic input.
Dual functionality to reset or power-down the device.
3 DAISY Digital input Chain the data input during serial communication in daisy-chain mode.
4 REFSEL Digital input Active low logic input to enable the internal reference.
When low, the internal reference is enabled; REFIO becomes an output that includes the VREF voltage.
When high, the internal reference is disabled; REFIO becomes an input to apply the external VREF voltage.
5 REFIO Analog input, output Internal reference output and external reference input pin. Decouple with REFGND on pin 6.
6 REFGND Power supply Reference GND pin; short to the analog GND plane.
Decouple with REFIO on pin 5 and REFCAP on pin 7.
7 REFCAP Analog output ADC reference decoupling capacitor pin. Decouple with REFGND on pin 6.
8 AGND Power supply Analog ground pin. Decouple with AVDD on pin 9.
9 AVDD Power supply Analog supply pin. Decouple with AGND on pin 8.
10 AUX_IN Analog input Auxiliary input channel: positive input. Decouple with AUX_GND on pin 11.
11 AUX_GND Analog input Auxiliary input channel: negative input. Decouple with AUX_IN on pin 10.
12 NC AIN_6P Analog input Analog input channel 6: Positive input. Decouple with AIN_6GND on pin 13.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
13 NC AIN_6GND Analog input Analog input channel 6: negative input. Decouple with AIN_6P on pin 12.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
14 NC AIN_7P Analog input Analog input channel 7: positive input. Decouple with AIN_7GND on pin 15.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
15 NC AIN_7GND Analog input Analog input channel 7: negative input. Decouple with AIN_7P on pin 14.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
16 AIN_0P Analog input Analog input channel 0: positive input. Decouple with AIN_0GND on pin 17.
17 AIN_0GND Analog input Analog input channel 0: negative input. Decouple with AIN_0P on pin 16.
18 AIN_1P Analog input Analog input channel 1: positive input. Decouple with AIN_1GND on pin 19.
19 AIN_1GND Analog input Analog input channel 1: negative input. Decouple with AIN_1P on pin 18.
20 AIN2_GND Analog input Analog input channel 2: positive input. Decouple with AIN_2GND on pin 21.
21 AIN_2P Analog input Analog input channel 2: negative input. Decouple with AIN_2P on pin 20.
22 AIN_3GND Analog input Analog input channel 3: positive input. Decouple with AIN_3GND on pin 23.
23 AIN_3P Analog input Analog input channel 3: negative input. Decouple with AIN_3P on pin 22.
24 NC AIN_4GND Analog input Analog input channel 4: positive input. Decouple with AIN_4GND on pin 25.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
25 NC AIN_4P Analog input Analog input channel 4: negative input. Decouple with AIN_4P on pin 24.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
26 NC AIN_5GND Analog input Analog input channel 5: positive input. Decouple with AIN_5GND on pin 27.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
27 NC AIN_5P Analog input Analog input channel 5: negative input. Decouple with AIN_5P on pin 26.
No connection for the ADS8684: this pin can be left floating or connected to AGND.
28 AGND Power supply Analog ground pin
29 AGND Power supply Analog ground pin
30 AVDD Power supply Analog supply pin. Decouple with AGND on pin 31.
31 AGND Power supply Analog ground pin. Decouple with AVDD on pin 30.
32 AGND Power supply Analog ground pin
33 DGND Power supply Digital ground pin. Decouple with DVDD on pin 34.
34 DVDD Power supply Digital supply pin. Decouple with DGND on pin 33.
35 DNC Do not connect Do not connect this pin to any node; must remain floating.
36 SDO Digital output Data output for serial communication
37 SCLK Digital input Clock input for serial communication
38 CS Digital input Active low logic input; chip-select signal
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |