Typical values at T_A = +25°C with nominal supplies. Unless otherwise noted, TX input data rate = 491.52 MSPS, f_DAC = 11796.48MSPS, interleave mode, A_OUT = –1 dBFS, 1^st Nyquist zone output, Internal PLL, f_REF = 491.52 MSPS, 24x Interpolation, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated

Matching at 1.8 GHz, Single tone, fDAC = 11.79648GSPS, interleave mode, 40-MHz offset

Figure 6-353 TX Single Tone Output Noise vs Frequency and Amplitude at 1.8 GHz

Matching at 1.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-355 TX 20-MHz LTE ACPR vs Digital Level at 1.8425 GHz

Matching at 1.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-357 TX 20-MHz LTE alt2-ACPR vs Digital Level at 1.8425 GHz

Matching at 1.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-359 TX 20-MHz LTE alt-ACPR vs DSA at 1.8 GHz

Matching at 1.8 GHz, fDAC = 11.79648 GSPS, interleave mode, normalized to output power at harmonic frequency

Figure 6-361 TX HD3 vs Digital Amplitude and Output Frequency at 1.8 GHz

fDAC = 8847.36 MSPS, interleave mode, 1.8 GHz matching, includes PCB and cable losses

Figure 6-363 TX Single Tone (–12 dBFS) Output Spectrum at 1.8 GHz (±300 MHz)

fDAC = 8847.36 MSPS, interleave mode, 1.8 GHz matching, includes PCB and cable losses

Figure 6-365 TX Single Tone (–6 dBFS) Output Spectrum at 1.8 GHz (±300 MHz)

fDAC = 8847.36 MSPS, interleave mode, 1.8 GHz matching, includes PCB and cable losses

Figure 6-367 TX Single Tone (–1 dBFS) Output Spectrum at 1.8 GHz (±300 MHz)

fDAC = 8847.36 MSPS, straight mode, 1.8 GHz matching, includes PCB and cable losses

Figure 6-369 TX Single Tone (–12 dBFS) Output Spectrum at 1.8 GHz (±300 MHz)

fDAC = 8847.36 MSPS, straight mode, 1.8 GHz matching, includes PCB and cable losses

Figure 6-371 TX Single Tone (–6 dBFS) Output Spectrum at 1.8 GHz (±300 MHz)

fDAC = 8847.36 MSPS, straight mode, 1.8 GHz matching, includes PCB and cable losses

Figure 6-373 TX Single Tone (–1 dBFS) Output Spectrum at 1.8 GHz (±300 MHz)

TM1.1, POUT_RMS = –13 dBFS

Figure 6-354 TX 20-MHz LTE Output Spectrum at 1.8425 GHz

Matching at 1.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-356 TX 20-MHz LTE alt-ACPR vs Digital Level at 1.8425 GHz

Matching at 1.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-358 TX 20-MHz LTE ACPR vs DSA at 1.8 GHz

Matching at 1.8 GHz, fDAC = 11.79648 GSPS, interleave mode, normalized to output power at harmonic frequency

Figure 6-360 TX HD2 vs Digital Amplitude and Output Frequency at 1.8 GHz

fDAC = 8847.36 MSPS, interleave mode, 1.8 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT.

Figure 6-362 TX Single Tone (–12 dBFS) Output Spectrum at 1.8 GHz (0-f_DAC)

fDAC = 8847.36 MSPS, interleave mode, 1.8 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT.

Figure 6-364 TX Single Tone (–6 dBFS) Output Spectrum at 1.8 GHz (0-f_DAC)

fDAC = 8847.36 MSPS, interleave mode, 1.8 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT.

Figure 6-366 TX Single Tone (–1 dBFS) Output Spectrum at 1.8 GHz (0-f_DAC)

fDAC = 8847.36 MSPS, straight mode, 1.8 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT and is due to mixing with digital clocks.

Figure 6-368 TX Single Tone (–12 dBFS) Output Spectrum at 1.8 GHz (0-f_DAC)

fDAC = 8847.36 MSPS, straight mode, 1.8 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT and is due to mixing with digital clocks.

Figure 6-370 TX Single Tone (–6 dBFS) Output Spectrum at 1.8 GHz (0-f_DAC)

fDAC = 8847.36 MSPS, straight mode, 1.8 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT and is due to mixing with digital clocks.

Figure 6-372 TX Single Tone (–1 dBFS) Output Spectrum at 1.8 GHz (0-f_DAC)