米6体育平台手机版

ZHCSOT2C january 2022 – may 2023 AFE7906

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

ABJ|400
- MCBG079C
ALK|400
- MPBGAU3B

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.11.2 RX Typical Characteristics at 800MHz

Typical values at T_A = +25°C, ADC Sampling Rate = 2949.12 GHz. Default conditions: output sample rate = 491.52MSPS (decimate by 6), PLL clock mode with f_REF = 491.52MHz, A_IN = –3 dBFS, DSA setting = 4 dB.

With 0.8 GHz matching, normalized to 830 MHz

Figure 6-50 RX In-Band Gain Flatness for Channel 1RX, f_IN = 830 MHz

With 0.8 GHz matching, normalized to phase at 25°C

Figure 6-52 RX Input Phase vs Temperature and DSA at f_OUT = 0.8 GHz

With 0.8 GHz matching
Differential Amplitude Error = P_IN(DSA Setting – 1) – P_IN(DSA Setting) + 1

Figure 6-54 RX Calibrated Differential Amplitude Error vs DSA Setting at 0.8 GHz

With 0.8 GHz matching
Integrated Amplitude Error = P_IN(DSA Setting) – P_IN(DSA Setting = 0) + (DSA Setting)

Figure 6-56 RX Calibrated Integrated Amplitude Error vs DSA Setting at 2.6 GHz

With 0.8 GHz matching
Differential Phase Error = Phase_IN(DSA Setting – 1) – Phase_IN(DSA Setting)

Figure 6-58 RX Calibrated Differential Phase Error vs DSA Setting at 0.8 GHz

With 0.8 GHz matching
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)

Figure 6-60 RX Calibrated Integrated Phase Error vs DSA Setting at 0.8 GHz

With 0.8 GHz matching, 12.5-MHz offset from tone

Figure 6-62 RX Noise Spectral Density vs Temperature at 0.8 GHz

With 0.8 GHz matching, 12.5-MHz offset from tone

Figure 6-64 RX Noise Spectral Density vs Input Amplitude and Channel at 0.8 GHz

With 0.8 GHz matching, each tone –7 dBFS, tone spacing = 20 MHz

Figure 6-66 RX IMD5 vs DSA Setting and Temperature at 0.8 GHz

With 0.8 GHz matching, tone spacing = 20 MHz, DSA = 12 dB

Figure 6-68 RX IMD3 vs Input Level and Temperature at 0.8 GHz

With 0.8 GHz matching, measured after HD2 trim, DDC bypass mode (TI only mode for characterization)

Figure 6-70 RX HD2 vs DSA Setting and Channel at 0.8 GHz

With 0.8 GHz matching, measured after HD2 trim, DDC bypass mode (TI only mode for characterization)

Figure 6-72 RX HD2 vs Input Level and Temperature at 0.8 GHz

With 0.8 GHz matching, DDC bypass mode (TI only mode for characterization)

Figure 6-74 RX HD3 vs DSA Setting and Temperature at 0.8 GHz

With 0.8 GHz matching, DDC bypass mode (TI only mode for characterization)

Figure 6-76 RX HD3 vs Input Level and Temperature at 0.8 GHz

With 0.8 GHz matching, –7 dBFS each tone, 20-MHz tone spacing, all supplies at MIN, TYP, or MAX recommended operating voltages

Figure 6-78 RX IMD3 vs Supply and Channel at 0.8 GHz

With 0.8 GHz matching, 12.5-MHz offset, all supplies at MIN, TYP, or MAX recommended operating voltages

Figure 6-80 RX Noise Spectral Density vs Supply and Channel at 0.8 GHz

With 0.8 GHz matching, normalized to fullscale at 25°C for each channel

Figure 6-51 RX Input Fullscale vs Temperature and Channel at 800MHz

With 0.8 GHz matching
Differential Amplitude Error = P_IN(DSA Setting – 1) – P_IN(DSA Setting) + 1

Figure 6-53 RX Uncalibrated Differential Amplitude Error vs DSA Setting at 0.8 GHz

With 0.8 GHz matching
Integrated Amplitude Error = P_IN(DSA Setting) – P_IN(DSA Setting = 0) + (DSA Setting)

Figure 6-55 RX Uncalibrated Integrated Amplitude Error vs DSA Setting at 0.8 GHz

With 0.8 GHz matching
Differential Phase Error = Phase_IN(DSA Setting – 1) – Phase_IN(DSA Setting)

Figure 6-57 RX Uncalibrated Differential Phase Error vs DSA Setting at 0.8 GHz

With 0.8 GHz matching
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0)

Figure 6-59 RX Uncalibrated Integrated Phase Error vs DSA Setting at 0.8 GHz

With 0.8 GHz matching, f_IN = 840 MHz, A_IN= –3 dBFS

Figure 6-61 RX Output FFT at 0.8 GHz

With 0.8 GHz matching, DSA Setting = 12 dB, 12.5-MHz offset from tone

Figure 6-63 RX Noise Spectral Density vs Input Amplitude and Temperature at 0.8 GHz

With 0.8 GHz matching, each tone –7 dBFS, tone spacing = 20 MHz

Figure 6-65 RX IMD3 vs DSA Setting and Temperature at 0.8 GHz

With 0.8 GHz matching, tone spacing = 20 MHz, DSA = 4 dB

Figure 6-67 RX IMD3 vs Input Level and Temperature at 0.8 GHz

With 0.8 GHz matching, tone spacing = 20 MHz, DSA = 12 dB

Figure 6-69 RX IMD5 vs Input Level and Temperature at 0.8 GHz

With 0.8 GHz matching, measured after HD2 trim, DDC bypass mode (TI only mode for characterization)

Figure 6-71 RX HD2 vs DSA Setting and Temperature at 0.8 GHz

With 0.8 GHz matching, DDC bypass mode (TI only mode for characterization)

Figure 6-73 RX HD3 vs DSA Setting and Channel at 0.8 GHz

With 0.8 GHz matching, DDC bypass mode (TI only mode for characterization)

Figure 6-75 RX HD3 vs Input Level and Channel at 0.8 GHz

With 0.8 GHz matching

Figure 6-77 RX Non-HD2/3 vs DSA Setting at 0.8 GHz

With 0.8 GHz matching, –7 dBFS each tone, 20-MHz tone spacing, all supplies at MIN, TYP, or MAX recommended operating voltages

Figure 6-79 RX IMD5 vs Supply and Channel at 0.8 GHz