Typical values at T_A = +25°C with nominal supplies. Default conditions: TX input data rate = 1474.56MSPS, f_DAC = 11796.48MSPS (8x interpolation), Mixed mode, 1^st Nyquist zone output, PLL clock mode with f_REF = 491.52MHz, A_OUT = –1dBFS, DSA = 0dB, Sin(x)/x enabled, DSA calibrated, 9.6GHz matching

Includes PCB and cable losses.

Figure 4-233 TX Output Power vs Frequency at 9.61GHz

Includes PCB and cable losses.

Figure 4-235 TX Output Power vs DSA Setting at 9.61GHz

Figure 4-237 TX DSA Calibrated Amplitude Differential Nonlinearity

Figure 4-239 TX DSA Calibrated Amplitude Differential Nonlinearity

Figure 4-241 TX DSA Calibrated Amplitude Integrated Nonlinearity

Figure 4-243 TX DSA Calibrated Amplitude Integrated Nonlinearity

Figure 4-245 TX DSA Calibrated Phase Differential Nonlinearity

Figure 4-247 TX DSA Calibrated Phase Differential Nonlinearity

Figure 4-249 TX DSA Calibrated Phase Integrated Nonlinearity

Figure 4-251 TX DSA Calibrated Amplitude Integrated Nonlinearity

50MHz tone spacing

Figure 4-253 TX IMD3 vs Digital Amplitude at 9.61GHz

50MHz tone spacing

Figure 4-255 TX IMD3 vs DSA Setting at 9.61GHz

Figure 4-257 TX IMD3 vs Tone Spacing at 9.61GHz

Figure 4-259 TX IMD3 vs Tone Spacing at 9.61GHz

Figure 4-261 TX NSD vs Digital Amplitude at 9.61GHz

Figure 4-263 TX NSD vs DSA Setting at 9.61GHz

50 MHz tone spacing

Figure 4-265 TX 2-tone SFDR vs Digital Amplitude at 9.61GHz

Includes PCB and cable losses.

Figure 4-267 TX Single Tone Spectrum at 9.61GHz and -1dBFS (1.2GHz BW)

Includes PCB and cable losses.

Figure 4-269 TX Single Tone Spectrum at 9.61GHz and -6dBFS (1.2GHz BW)

Includes PCB and cable losses.

Figure 4-271 TX Single Tone Spectrum at 9.61GHz and -12dBFS (1.2GHz BW)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-273 TX 2-Tone Spectrum at 9.61GHz and -7dBFS (1.2GHz BW)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-275 TX 2-Tone Spectrum at 9.61GHz and -13dBFS (1.2GHz BW)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-277 TX 2-Tone Spectrum at 9.61GHz and -30dBFS Each (1.2GHz BW)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-279 TX 2-Tone Spectrum at 9.61GHz and -60dBFS Each (1.2GHz BW)

Figure 4-281 TX NR100MHz ACPR vs DSA Setting at 9.61GHzTX NR100MHz alt-ACPR vs DSA Setting at 9.61GHz

Includes PCB and cable losses.

Figure 4-234 TX Output Power vs Frequency at 9.61GHz

Figure 4-236 TX DSA Uncalibrated Amplitude Differential Nonlinearity

Figure 4-238 TX DSA Uncalibrated Amplitude Differential Nonlinearity

Figure 4-240 TX DSA Uncalibrated Amplitude Integrated Nonlinearity

Figure 4-242 TX DSA Uncalibrated Amplitude Integrated Nonlinearity

Figure 4-244 TX DSA Uncalibrated Phase Differential Nonlinearity

Figure 4-246 TX DSA Uncalibrated Phase Differential Nonlinearity

Figure 4-248 TX DSA Uncalibrated Phase Integrated Nonlinearity

Figure 4-250 TX DSA Uncalibrated Phase Integrated Nonlinearity

50MHz tone spacing

Figure 4-252 TX IMD3 vs Digital Amplitude at 9.61GHz

50MHz tone spacing

Figure 4-254 TX IMD3 vs DSA Setting at 9.61GHz

50MHz tone spacing

Figure 4-256 TX IMD3 vs DSA Setting at 9.61GHz

Figure 4-258 TX IMD3 vs Tone Spacing at 9.61GHz

Figure 4-260 TX NSD vs Digital Amplitude at 9.61GHz

Figure 4-262 TX NSD vs DSA Setting at 9.61GHz

Figure 4-264 TX NSD vs DSA Setting at 9.61GHz

Includes PCB and cable losses.

Figure 4-266 TX Single Tone Spectrum at 9.61GHz and -1dBFS (wideband)

Includes PCB and cable losses.

Figure 4-268 TX Single Tone Spectrum at 9.61GHz and -6dBFS (wideband)

Includes PCB and cable losses.

Figure 4-270 TX Single Tone Spectrum at 9.61GHz and -12dBFS (wideband)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-272 TX 2-Tone Spectrum at 9.61GHz and -7dBFS (wideband)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-274 TX 2-Tone Spectrum at 9.61GHz and -13dBFS (wideband)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-276 TX 2-Tone Spectrum at 9.61GHz and -30dBFS Each (wideband)

Includes PCB and cable losses, 50MHz tone spacing.

Figure 4-278 TX 2-Tone Spectrum at 9.61GHz and -60dBFS Each (wideband)

Single sideband, external clock mode, input clock phase noise removed

Figure 4-280 TX Additive Phase Noise vs Offset Frequency at 9.61GHz

Figure 4-282 TX NR100MHz EVM vs DSA Setting at 9.61GHz

Includes PCB and cable losses.

Figure 4-283 TX NR100MHz Output Spectrum at 9.61GHz

Includes PCB and cable losses.

Figure 4-284 TX 4xNR100MHz Output Spectrum at 9.61GHz