Typical values at T_A = +25°C, ADC Sampling Rate = 2949.12GHz. Default conditions: output sample rate = 1474.56MSPS (decimate by 2) , External clock mode with f_CLK = 11796.48MHz, A_IN = –3dBFS, DSA setting = 3 dB, 9.6GHz matching.

Normalized to 9.6GHz

Figure 4-449 RX Input Amplitude vs Frequency

Figure 4-451 RX Amplitude Differential Non-linearity at 9.6GHz

Figure 4-453 RX Phase Differential Non-linearity at 9.6GHz

Figure 4-455 RX IMD3 vs Digital Amplitude at 9.6GHz

50MHz tone spacing

Figure 4-457 RX IMD3 vs DSA Setting at 9.6GHz

Figure 4-459 RX NSD vs Digital Amplitude at 9.6GHz

Figure 4-461 RX NSD vs DSA Setting at 9.6GHz

Figure 4-463 RX HD2 vs DSA Setting at 9.6GHz

Figure 4-465 RX HD3 vs DSA Setting at 9.6GHz

-6dBFS

Figure 4-467 RX Single Tone Output FFT at 9.61GHz

-30dBFS

Figure 4-469 RX Single Tone Output FFT at 9.61GHz

9.61 and 9.635GHz , -7dBFS each tone

Figure 4-471 RX Two Tone Output FFT at 9.61GHz

9.61 and 9.635GHz , -30dBFS each tone

Figure 4-473 RX Two Tone Output FFT at 9.61GHz

Normalized to 9.6GHz

Figure 4-450 RX Input Amplitude vs Frequency at 9.6GHz

Figure 4-452 RX Amplitude Integrated Non-linearity at 9.6GHz

Figure 4-454 RX Phase Integrated Non-linearity at 9.6GHz

50MHz tone spacing

Figure 4-456 RX IMD3 vs DSA Setting at 9.6GHz

50MHz tone spacing

Figure 4-458 RX IMD3 vs Tone Spacing at 9.6GHz

Figure 4-460 RX NSD vs Digital Amplitude at 9.6GHz

Figure 4-462 RX HD2 vs Digital Level at 9.6GHz

Figure 4-464 RX HD3 vs Digital Level at 9.6GHz

-1dBFS

Figure 4-466 RX Single Tone Output FFT at 9.61 GHz

-12 dBFS.

Figure 4-468 RX Single Tone Output FFT at 9.61GHz

-60 dBFS

Figure 4-470 RX Single Tone Output FFT at 9.61GHz

9.61 and 9.635GHz , -13dBFS each tone

Figure 4-472 RX Two Tone Output FFT at 9.61GHz

9.61 and 9.635GHz , -60dBFS each tone

Figure 4-474 RX Two Tone Output FFT at 9.61GHz