Typical values at T_A = +25°C with nominal supplies. Default conditions: TX input data rate = 491.52MSPS, f_DAC = 11796.48 MSPS (24x interpolation), mixed mode, 1^st Nyquist zone output, PLL clock mode with f_REF = 491.52MHz, A_OUT = –1 dBFS, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated, 8.1GHz matching

includes PCB and cable losses.

Figure 4-184 TX Output Power vs Frequency at 8.11GHz

includes PCB and cable losses.

Figure 4-186 TX Output Power vs Temperature at 8.11GHz

Figure 4-188 TX DSA Calibrated Amplitude Differential Nonlinearity at 8.11GHz

Figure 4-190 TX DSA Calibrated Amplitude Differential Nonlinearity at 8.11GHz

Figure 4-192 TX DSA Calibrated Amplitude Integrated Nonlinearity at 8.11GHz

Figure 4-194 TX DSA Calibrated Amplitude Integrated Nonlinearity at 8.11GHz

Figure 4-196 TX DSA Calibrated Phase Differential Nonlinearity at 8.11GHz

Figure 4-198 TX DSA Calibrated Phase Differential Nonlinearity at 8.11GHz

Figure 4-200 TX DSA Calibrated Phase Integrated Nonlinearity at 8.11GHz

Figure 4-202 TX DSA Calibrated Phase Integrated Nonlinearity at 8.11GHz

-1dBFS

Figure 4-204 TX Single Tone Output Spectrum at 8.11GHz

-6dBFS

Figure 4-206 TX Single Tone Output Spectrum at 8.11GHz

-12dBFS

Figure 4-208 TX Single Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -7dBFS each tone

Figure 4-210 TX Dual Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -12dBFS each tone

Figure 4-212 TX Dual Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -30dBFS each tone

Figure 4-214 TX Dual Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -60dBFS each tone

Figure 4-216 TX Dual Tone Output Spectrum at 8.11GHz

-7dBFS each tone, 50MHz tone spacing

Figure 4-218 TX IMD3 vs Digital Amplitude at 8.11GHz

50 MHz tone spacing

Figure 4-220 TX IMD3 vs DSA Setting at 8.11GHz

50 MHz offset

Figure 4-222 TX NSD vs Digital Amplitude at 8.11GHz

50 MHz offset

Figure 4-224 TX NSD vs DSA Setting at 8.11GHz

Figure 4-226 TX NR100MHz ACPR vs DSA Setting 8.11GHz

Figure 4-228 TX NR100MHz EVM vs DSA Setting 8.11GHz

includes PCB and cable losses.

Figure 4-185 TX Output Power vs DSA Setting at 8.11GHz

Figure 4-187 TX DSA Uncalibrated Amplitude Differential Nonlinearity at 8.11GHz

Figure 4-189 TX DSA Uncalibrated Amplitude Differential Nonlinearity at 8.11GHz

Figure 4-191 TX DSA Uncalibrated Amplitude Integrated Nonlinearity at 8.11GHz

Figure 4-193 TX DSA Uncalibrated Amplitude Integrated Nonlinearity at 8.11GHz

Figure 4-195 TX DSA Uncalibrated Phase Differential Nonlinearity at 8.11GHz

Figure 4-197 TX DSA Uncalibrated Phase Differential Nonlinearity at 8.11GHz

Figure 4-199 TX DSA Uncalibrated Phase Integrated Nonlinearity at 8.11GHz

Figure 4-201 TX DSA Uncalibrated Phase Integrated Nonlinearity at 8.11GHz

-1dBFS

Figure 4-203 TX Single Tone Output Spectrum at 8.11GHz

-6dBFS

Figure 4-205 TX Single Tone Output Spectrum at 8.11GHz

-12dBFS

Figure 4-207 TX Single Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -7dBFS each tone

Figure 4-209 TX Dual Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -12dBFS each tone

Figure 4-211 TX Dual Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -30dBFS each tone

Figure 4-213 TX Dual Tone Output Spectrum at 8.11GHz

50MHz tone spacing, -60dBFS each tone

Figure 4-215 TX Dual Tone Output Spectrum at 8.11GHz

-7dBFS each tone, 50MHz tone spacing

Figure 4-217 TX IMD3 vs Digital Amplitude at 8.11GHz

50MHz tone spacing

Figure 4-219 TX IMD3 vs DSA Setting at 8.11GHz

50 MHz tone spacing

Figure 4-221 TX 2-Tone SFDR vs Digital Amplitude at 8.11GHz

50 MHz offset

Figure 4-223 TX NSD vs Digital Amplitude at 8.11GHz

50 MHz offset

Figure 4-225 TX NSD vs DSA Setting at 8.11GHz

Figure 4-227 TX NR100MHz alt-ACPR vs DSA Setting 8.11GHz

Figure 4-229 TX 100MHz NR Output Spectrum at 8.11GHz

Figure 4-230 TX 100MHz NR EVM at 8.11GHz

Figure 4-231 TX 4x100MHz NR Output Spectrum 8.11GHz

Figure 4-232 TX 4x100MHz NR Output Spectrum 8.11GHz