ZHCSPA8A March   2024  – August 2024 AFE7950-SP

PRODMIX  

  1.   1
  2. 1特性
  3. 2应用
  4. 3说明
  5. 4Specifications
    1. 4.1  Absolute Maximum Ratings
    2. 4.2  ESD Ratings
    3. 4.3  Recommended Operating Conditions
    4. 4.4  Thermal Information
    5. 4.5  Transmitter Electrical Characteristics
    6. 4.6  RF ADC Electrical Characteristics
    7. 4.7  PLL/VCO/Clock Electrical Characteristics
    8. 4.8  Digital Electrical Characteristics
    9. 4.9  Power Supply Electrical Characteristics
    10. 4.10 Timing Requirements
    11. 4.11 Switching Characteristics
    12. 4.12 Typical Characteristics
      1. 4.12.1  TX Typical Characteristics 800MHz
      2. 4.12.2  TX Typical Characteristics at 1.8GHz
      3. 4.12.3  TX Typical Characteristics at 2.6GHz
      4. 4.12.4  TX Typical Characteristics at 3.5GHz
      5. 4.12.5  TX Typical Characteristics at 4.9GHz
      6. 4.12.6  TX Typical Characteristics at 8.1GHz
      7. 4.12.7  TX Typical Characteristics at 9.6GHz
      8. 4.12.8  RX Typical Characteristics at 800MHz
      9. 4.12.9  RX Typical Characteristics at 1.75-1.9GHz
      10. 4.12.10 RX Typical Characteristics at 2.6GHz
      11. 4.12.11 RX Typical Characteristics at 3.5GHz
      12. 4.12.12 RX Typical Characteristics at 4.9GHz
      13. 4.12.13 RX Typical Characteristics at 8.1GHz
      14. 4.12.14 RX Typical Characteristics at 9.6GHz
  6. 5Device and Documentation Support
    1. 5.1 接收文档更新通知
    2. 5.2 支持资源
    3. 5.3 Trademarks
    4. 5.4 静电放电警告
    5. 5.5 术语表
  7. 6Revision History
  8. 7Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

RF ADC Electrical Characteristics

Typical values at TA = +25°C, full temperature range is TA,MIN = -40°C to TJ,MAX = +110°C; RX Output Rate =  491.52MSPS below 6GHz input frequency and 1474.56MSPS above 6GHz input frequency, fADC = 2949.12MSPS; PLL clock mode with fREF = 491.52MHz below 6GHz input frequency and External clock mode with fCLK = 11796.48MHz above 6GHz input frequency; nominal power supplies; DSA Setting = 4dB below 6GHz and 3dB above 6GHz; SerDes rate =24.33Gbps; unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
ADCRES ADC resolution 14 bits
FADC ADC Sample Rate 1.5 3 GSPS
FRFin_MAX RF input frequency range Requires PCB matching based on frequency range 12000 MHz
FRFin_MIN RF input frequency range Requires PCB matching based on frequency range 5 MHz
PFS_CW,min Min Full scale input power, at device pins (1) fIN = 830 MHz, DSA=0dB -2.9 dBm
fIN = 1760 MHz, DSA=0dB -2.8 dBm
fIN = 2610 MHz, DSA=0dB -1.8 dBm
fIN = 3610 MHz, DSA=0dB -0.4 dBm
fIN = 4910 MHz, DSA=0dB 0.1 dBm
fIN = 8150 MHz, DSA=0dB 2.1 dBm
fIN = 9610 MHz, DSA=0dB 4.3 dBm
PFS_CW,MAX MAX Full scale input power - reliability limited, at device pins fIN = 830 MHz, DSA = 20dB 16.7 dBm
fIN = 1760 MHz, DSA = 20dB 17.0 dBm
fIN = 2610 MHz, DSA = 20dB 18 dBm
fIN = 3610 MHz, DSA = 20dB 18.5 dBm
fIN = 4910 MHz, DSA = 20dB 19.3 dBm
fIN = 8150 MHz, DSA = 20dB 21.3 dBm
fIN = 9610 MHz, DSA = 20dB 23.5 dBm
S11 Input Return Loss with matching network -12 dB
ATTrange DSA Attenuation range 25 dB
ATTstep DSA Attenuation step 0.5 dB
DSA Attenuation step accuracy Delta=Gatt(X)-Gatt(X-1), Fin=3610MHz, after calibration ±0.1 dB
DSA Gain Steps Phase accuracy
any 8dB range
Fin=3610MHz, after calibration ±0.9 deg
DSA Gain Steps Phase accuracy
any 8dB range
Fin=4910MHz, after calibration ±1.8 deg
NSD Noise Density
(small signal)
fIN = 830 MHz, DSA = 3dB(3) -155.2 dBFS/Hz
fIN = 1760 MHz, DSA = 3dB(3) -155.0 dBFS/Hz
fIN = 2610 MHz, DSA = 3dB(3) -154.4 dBFS/Hz
fIN = 3610 MHz, DSA = 3dB(3) -154.1 dBFS/Hz
fIN = 4910 MHz, DSA = 3dB(3) -155.1 dBFS/Hz
fIN = 8150 MHz, DSA = 3dB(3) -150 dBFS/Hz
fIN = 9610 MHz, DSA = 3dB(3) -151 dBFS/Hz
fIN = 830 MHz, 3<=Atten<=22 -156.0 dBFS/Hz
fIN = 1760 MHz, 3<=Atten<=25 -155.8 dBFS/Hz
fIN = 2610 MHz, 3<=Atten<=25 -155.7 dBFS/Hz
fIN = 3610 MHz, 3<=Atten<=25 -155.4 dBFS/Hz
fIN = 4910 MHz, 3<=Atten<=25 -155.8 dBFS/Hz
fIN = 8150 MHz, 3<=Atten<=25 -152.5 dBFS/Hz
fIN = 9610 MHz, 3<=Atten<=25 -152.5 dBFS/Hz
NFmin Noise Figure min
DSA Atten=0 - 3dB
fIN = 830 MHz 19.1 dB
fIN = 1760 MHz 19.0 dB
fIN = 2610 MHz 20.9 dB
fIN = 3610 MHz 22.8 dB
fIN = 4910 MHz 22.4 dB
fIN = 8150 MHz 27.3 dB
fIN = 9610 MHz 30 dB
NF Noise Figure
DSA Atten=4dB
fIN = 830 MHz(4) 20.0 dB
fIN = 1760 MHz(4) 20.6 dB
fIN = 2610 MHz(4) 21.9 dB
fIN = 3610 MHz(4) 23.5 dB
fIN = 4910 MHz(4) 22.3 dB
fIN = 8150 MHz(4) 27.9 dB
fIN = 9610 MHz(4) 30.7 dB
NFmax Noise Figure
DSA Atten=20dB
fIN = 830 MHz 34.7 dB
fIN = 1760 MHz 35.2 dB
fIN = 2610 MHz 36.0 dB
fIN = 3610 MHz 37.3 dB
fIN = 4910 MHz 37.6 dB
fIN = 8150 MHz 42.8 dB
fIN = 9610 MHz 45 dB
IMD3 3rd order intermodulation 2 tones at at fIN ± 10MHz
-7dBFS each tone
fIN = 840 MHz, 3<=Atten<=12 -82 dBc
fIN = 1770 MHz, 3<=Atten<=12 -84 dBc
fIN = 2610 MHz, 3<=Atten<=12 -74 dBc
fIN = 3610 MHz, 3<=Atten<=12 -77 dBc
fIN = 4920 MHz, 3<=Atten<=12 -76 dBc
fIN = 8150 MHz, 3<=Atten<=12, 25MHz tone spacing -55 dBc
fIN = 9610 MHz, 3<=Atten<=12, 25MHz tone spacing -60 dBc
SFDR Spurious Free Dynamic Range
within output bandwidth, AIN = -3 dBFS
fIN = 830 MHz 88 dBFS
fIN = 1760 MHz 81 dBFS
fIN = 2610 MHz 88 dBFS
fIN = 3610 MHz 84 dBFS
fIN = 4910 MHz 79 dBFS
fIN = 8150 MHz 78 dBFS
fIN = 9610 MHz 71 dBFS
HD2 2nd Harmonic Distortion
AIN = -3 dBFS(2)
fIN = 830 MHz -86 dBFS
fIN = 1760 MHz -91 dBFS
fIN = 2610 MHz -88 dBFS
fIN = 3610 MHz -87 dBFS
fIN = 4910 MHz -84 dBFS
fIN = 8150 MHz -70 dBFS
fIN = 9610 MHz -70 dBFS
HD3 3rd Harmonic Distortion
AIN = -3 dBFS
fIN = 830 MHz -80 dBFS
fIN = 1760 MHz -85 dBFS
fIN = 2501 MHz -80 -58 dBFS
fIN = 2610 MHz -85 dBFS
fIN = 3610 MHz -78 dBFS
fIN = 4910 MHz -75 dBFS
fIN = 8150 MHz -70 dBFS
fIN = 9610 MHz -70 dBFS
HDn, n>3 SFDR excl. HD2 and HD3
AIN = -3 dBFS
fIN = 830 MHz -88 dBFS
fIN = 1760 MHz -81 dBFS
fIN = 2610 MHz -88 dBFS
fIN = 3610 MHz -84 dBFS
fIN = 4910 MHz -82 dBFS
fIN = 8150 MHz -78 dBFS
fIN = 9610 MHz -78 dBFS
SFDR Spurious Free Dynamic Range
AIN = -13 dBFS
0<=Atten<=16
fIN = 830 MHz 89 dBFS
fIN = 1760 MHz 89 dBFS
fIN = 2610 MHz 95 dBFS
fIN = 3610 MHz 90 dBFS
fIN = 4910 MHz 90 dBFS
fIN = 8150 MHz 83 dBFS
fIN = 9610 MHz 80 dBFS
HD2 2nd Harmonic Distortion
AIN = -13 dBFS
0<=Atten<=16
fIN = 830 MHz, with board trim -79 dBFS
fIN = 1760 MHz, with board trim -102 dBFS
fIN = 2610 MHz, with board trim -100 dBFS
fIN = 3610 MHz, with board trim -101 dBFS
fIN = 4910 MHz, with board trim -99 dBFS
fIN = 8150 MHz, with board trim -107 dBFS
fIN = 9610 MHz, with board trim -107 dBFS
HD3 3rd Harmonic Distortion
AIN = -13 dBFS
0<=Atten<=16
fIN = 830 MHz -95 dBFS
fIN = 1760 MHz -95 dBFS
fIN = 2610 MHz -98 dBFS
fIN = 3610 MHz -97 dBFS
fIN = 4910 MHz -94 dBFS
fIN = 8150 MHz -100 dBFS
fIN = 9610 MHz -102 dBFS
HDn, n>3 SFDR excl. HD2 and HD3
AIN = -13 dBFS
0<=Atten<=16
fIN = 830 MHz -89 dBFS
fIN = 1760 MHz -89 dBFS
fIN = 2610 MHz -95 dBFS
fIN = 3610 MHz -90 dBFS
fIN = 4910 MHz -90 dBFS
fIN = 8150 MHz -83 dBFS
fIN = 9610 MHz -80 dBFS
RX-RX Isolation Near Channel:
1RXIN to 2RXIN
3RXIN to 4RXIN
 
fIN = 830 MHz -77 dBc
fIN = 1760 MHz -71 dBc
fIN = 2610 MHz -74 dBc
fIN = 3610 MHz -77 dBc
fIN = 4910 MHz -65 dBc
fIN = 8150 MHz -64 dBc
fIN = 9610 MHz -60 dBc
TX-FB Isolation Near Channel:
2TXOUT to 1FBIN
4TXOUT to 2FBIN
fIN = 830 MHz -84 dBc
fIN = 1760 MHz -88 dBc
fIN = 2610 MHz -85 dBc
fIN = 3610 MHz -75 dBc
fIN = 4910 MHz -82 dBc
fIN = 8150 MHz -71 dBc
fIN = 9610 MHz -69 dBc
TX-RX Isolation Far Channel:
2TXOUT to 1RXIN
4TXOUT to 3RXIN
fIN = 830 MHz -86 dBc
fIN = 1760 MHz -87 dBc
fIN = 2610 MHz -91 dBc
fIN = 3610 MHz -83 dBc
fIN = 4910 MHz -82 dBc
fIN = 8150 MHz -68 dBc
fIN = 9610 MHz -68 dBc
The input fullscale at minimum attenuation can be reduce by adding a digital gain range to the DSA, extending the useful range of the DSA. The noise figure remains constant over the digital gain range.
NLE correction of HD2
From DSA = 3dB down to 0dB, NSD increases 1dB per DSA dB
NF increase 1dB per DSA 1dB above DSA = 3dB