ZHCSSS9A march   2023  – august 2023 AM62A3 , AM62A3-Q1 , AM62A7 , AM62A7-Q1

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
    1. 3.1 Functional Block Diagram
  5. 4 Revision History
  6. 5 Device Comparison
    1. 5.1 Related Products
  7. 6 Terminal Configuration and Functions
    1. 6.1 Pin Diagrams
    2. 6.2 Pin Attributes
      1.      12
      2.      13
    3. 6.3 Signal Descriptions
      1.      15
      2. 6.3.1  CPSW3G
        1. 6.3.1.1 MAIN Domain
          1.        18
          2.        19
          3.        20
          4.        21
      3. 6.3.2  CPTS
        1. 6.3.2.1 MAIN Domain
          1.        24
      4. 6.3.3  CSI-2
        1. 6.3.3.1 MAIN Domain
          1.        27
      5. 6.3.4  DDRSS
        1. 6.3.4.1 MAIN Domain
          1.        30
      6. 6.3.5  DSS
        1. 6.3.5.1 MAIN Domain
          1.        33
      7. 6.3.6  ECAP
        1. 6.3.6.1 MAIN Domain
          1.        36
          2.        37
          3.        38
      8. 6.3.7  Emulation and Debug
        1. 6.3.7.1 MAIN Domain
          1.        41
        2. 6.3.7.2 MCU Domain
          1.        43
      9. 6.3.8  EPWM
        1. 6.3.8.1 MAIN Domain
          1.        46
          2.        47
          3.        48
          4.        49
      10. 6.3.9  EQEP
        1. 6.3.9.1 MAIN Domain
          1.        52
          2.        53
          3.        54
      11. 6.3.10 GPIO
        1. 6.3.10.1 MAIN Domain
          1.        57
          2.        58
        2. 6.3.10.2 MCU Domain
          1.        60
      12. 6.3.11 GPMC
        1. 6.3.11.1 MAIN Domain
          1.        63
      13. 6.3.12 I2C
        1. 6.3.12.1 MAIN Domain
          1.        66
          2.        67
          3.        68
          4.        69
        2. 6.3.12.2 MCU Domain
          1.        71
        3. 6.3.12.3 WKUP Domain
          1.        73
      14. 6.3.13 MCAN
        1. 6.3.13.1 MAIN Domain
          1.        76
        2. 6.3.13.2 MCU Domain
          1.        78
          2.        79
      15. 6.3.14 MCASP
        1. 6.3.14.1 MAIN Domain
          1.        82
          2.        83
          3.        84
      16. 6.3.15 MCSPI
        1. 6.3.15.1 MAIN Domain
          1.        87
          2.        88
          3.        89
        2. 6.3.15.2 MCU Domain
          1.        91
          2.        92
      17. 6.3.16 MDIO
        1. 6.3.16.1 MAIN Domain
          1.        95
      18. 6.3.17 MMC
        1. 6.3.17.1 MAIN Domain
          1.        98
          2.        99
          3.        100
      19. 6.3.18 OSPI
        1. 6.3.18.1 MAIN Domain
          1.        103
      20. 6.3.19 Power Supply
        1.       105
      21. 6.3.20 Reserved
        1.       107
      22. 6.3.21 System and Miscellaneous
        1. 6.3.21.1 Boot Mode Configuration
          1. 6.3.21.1.1 MAIN Domain
            1.         111
        2. 6.3.21.2 Clock
          1. 6.3.21.2.1 MCU Domain
            1.         114
          2. 6.3.21.2.2 WKUP Domain
            1.         116
        3. 6.3.21.3 System
          1. 6.3.21.3.1 MAIN Domain
            1.         119
          2. 6.3.21.3.2 MCU Domain
            1.         121
          3. 6.3.21.3.3 WKUP Domain
            1.         123
        4. 6.3.21.4 VMON
          1.        125
      23. 6.3.22 TIMER
        1. 6.3.22.1 MAIN Domain
          1.        128
        2. 6.3.22.2 MCU Domain
          1.        130
        3. 6.3.22.3 WKUP Domain
          1.        132
      24. 6.3.23 UART
        1. 6.3.23.1 MAIN Domain
          1.        135
          2.        136
          3.        137
          4.        138
          5.        139
          6.        140
          7.        141
        2. 6.3.23.2 MCU Domain
          1.        143
        3. 6.3.23.3 WKUP Domain
          1.        145
      25. 6.3.24 USB
        1. 6.3.24.1 MAIN Domain
          1.        148
          2.        149
    4. 6.4 Pin Connectivity Requirements
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Power-On Hours (POH)
    4. 7.4  Recommended Operating Conditions
    5. 7.5  Operating Performance Points
    6. 7.6  Power Consumption Summary
    7. 7.7  Electrical Characteristics
      1. 7.7.1 I2C Open-Drain, and Fail-Safe (I2C OD FS) Electrical Characteristics
      2. 7.7.2 Fail-Safe Reset (FS RESET) Electrical Characteristics
      3. 7.7.3 High-Frequency Oscillator (HFOSC) Electrical Characteristics
      4. 7.7.4 Low-Frequency Oscillator (LFXOSC) Electrical Characteristics
      5. 7.7.5 SDIO Electrical Characteristics
      6. 7.7.6 LVCMOS Electrical Characteristics
      7. 7.7.7 CSI-2 (D-PHY) Electrical Characteristics
      8. 7.7.8 USB2PHY Electrical Characteristics
      9. 7.7.9 DDR Electrical Characteristics
    8. 7.8  VPP Specifications for One-Time Programmable (OTP) eFuses
      1. 7.8.1 Recommended Operating Conditions for OTP eFuse Programming
      2. 7.8.2 Hardware Requirements
      3. 7.8.3 Programming Sequence
      4. 7.8.4 Impact to Your Hardware Warranty
    9. 7.9  Thermal Resistance Characteristics
      1. 7.9.1 Thermal Resistance Characteristics for AMB Package
    10. 7.10 Timing and Switching Characteristics
      1. 7.10.1 Timing Parameters and Information
      2. 7.10.2 Power Supply Requirements
        1. 7.10.2.1 Power Supply Slew Rate Requirement
        2. 7.10.2.2 Power Supply Sequencing
          1. 7.10.2.2.1 Power-Up Sequencing
          2. 7.10.2.2.2 Power-Down Sequencing
          3. 7.10.2.2.3 Partial IO Power Sequencing
      3. 7.10.3 System Timing
        1. 7.10.3.1 Reset Timing
        2. 7.10.3.2 Error Signal Timing
        3. 7.10.3.3 Clock Timing
      4. 7.10.4 Clock Specifications
        1. 7.10.4.1 Input Clocks / Oscillators
          1. 7.10.4.1.1 MCU_OSC0 Internal Oscillator Clock Source
            1. 7.10.4.1.1.1 Load Capacitance
            2. 7.10.4.1.1.2 Shunt Capacitance
          2. 7.10.4.1.2 MCU_OSC0 LVCMOS Digital Clock Source
          3. 7.10.4.1.3 WKUP_LFOSC0 Internal Oscillator Clock Source
          4. 7.10.4.1.4 WKUP_LFOSC0 LVCMOS Digital Clock Source
          5. 7.10.4.1.5 WKUP_LFOSC0 Not Used
        2. 7.10.4.2 Output Clocks
        3. 7.10.4.3 PLLs
        4. 7.10.4.4 Recommended System Precautions for Clock and Control Signal Transitions
      5. 7.10.5 Peripherals
        1. 7.10.5.1  CPSW3G
          1. 7.10.5.1.1 CPSW3G MDIO Timing
          2. 7.10.5.1.2 CPSW3G RMII Timing
          3. 7.10.5.1.3 CPSW3G RGMII Timing
        2. 7.10.5.2  CPTS
        3. 7.10.5.3  CSI-2
        4. 7.10.5.4  DDRSS
        5. 7.10.5.5  DSS
        6. 7.10.5.6  ECAP
        7. 7.10.5.7  Emulation and Debug
          1. 7.10.5.7.1 Trace
          2. 7.10.5.7.2 JTAG
        8. 7.10.5.8  EPWM
        9. 7.10.5.9  EQEP
        10. 7.10.5.10 GPIO
        11. 7.10.5.11 GPMC
          1. 7.10.5.11.1 GPMC and NOR Flash — Synchronous Mode
          2. 7.10.5.11.2 GPMC and NOR Flash — Asynchronous Mode
          3. 7.10.5.11.3 GPMC and NAND Flash — Asynchronous Mode
        12. 7.10.5.12 I2C
        13. 7.10.5.13 MCAN
        14. 7.10.5.14 MCASP
        15. 7.10.5.15 MCSPI
          1. 7.10.5.15.1 MCSPI — Controller Mode
          2. 7.10.5.15.2 MCSPI — Peripheral Mode
        16. 7.10.5.16 MMCSD
          1. 7.10.5.16.1 MMC0 - eMMC/SD/SDIO Interface
            1. 7.10.5.16.1.1  Legacy SDR Mode
            2. 7.10.5.16.1.2  High Speed SDR Mode
            3. 7.10.5.16.1.3  HS200 Mode
            4. 7.10.5.16.1.4  Default Speed Mode
            5. 7.10.5.16.1.5  High Speed Mode
            6. 7.10.5.16.1.6  UHS–I SDR12 Mode
            7. 7.10.5.16.1.7  UHS–I SDR25 Mode
            8. 7.10.5.16.1.8  UHS–I SDR50 Mode
            9. 7.10.5.16.1.9  UHS–I DDR50 Mode
            10. 7.10.5.16.1.10 UHS–I SDR104 Mode
          2. 7.10.5.16.2 MMC1/MMC2 - SD/SDIO Interface
            1. 7.10.5.16.2.1 Default Speed Mode
            2. 7.10.5.16.2.2 High Speed Mode
            3. 7.10.5.16.2.3 UHS–I SDR12 Mode
            4. 7.10.5.16.2.4 UHS–I SDR25 Mode
            5. 7.10.5.16.2.5 UHS–I SDR50 Mode
            6. 7.10.5.16.2.6 UHS–I DDR50 Mode
            7. 7.10.5.16.2.7 UHS–I SDR104 Mode
        17. 7.10.5.17 OSPI
          1. 7.10.5.17.1 OSPI0 PHY Mode
            1. 7.10.5.17.1.1 OSPI0 With PHY Data Training
            2. 7.10.5.17.1.2 OSPI0 Without Data Training
              1. 7.10.5.17.1.2.1 OSPI0 PHY SDR Timing
              2. 7.10.5.17.1.2.2 OSPI0 PHY DDR Timing
          2. 7.10.5.17.2 OSPI0 Tap Mode
            1. 7.10.5.17.2.1 OSPI0 Tap SDR Timing
            2. 7.10.5.17.2.2 OSPI0 Tap DDR Timing
        18. 7.10.5.18 Timers
        19. 7.10.5.19 UART
        20. 7.10.5.20 USB
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Processor Subsystems
      1. 8.2.1 Arm Cortex-A53 Subsystem
      2. 8.2.2 Device/Power Manager
      3. 8.2.3 MCU Arm Cortex-R5F Subsystem
    3. 8.3 Accelerators and Coprocessors
      1. 8.3.1 C7xV-256 Deep Learning Accelerator
      2. 8.3.2 Vision Pre-processing Accelerator
      3. 8.3.3 JPEG Encoder
      4. 8.3.4 Video Accelerator
    4. 8.4 Other Subsystems
      1. 8.4.1 Dual Clock Comparator (DCC)
      2. 8.4.2 Data Movement Subsystem (DMSS)
      3. 8.4.3 Memory Cyclic Redundancy Check (MCRC)
      4. 8.4.4 Peripheral DMA Controller (PDMA)
      5. 8.4.5 Real-Time Clock (RTC)
    5. 8.5 Peripherals
      1. 8.5.1  Gigabit Ethernet Switch (CPSW3G)
      2. 8.5.2  Camera Serial Interface Receiver (CSI_RX_IF)
      3. 8.5.3  Display Subsystem (DSS)
      4. 8.5.4  Enhanced Capture (ECAP)
      5. 8.5.5  Error Location Module (ELM)
      6. 8.5.6  Enhanced Pulse Width Modulation (EPWM)
      7. 8.5.7  Error Signaling Module (ESM)
      8. 8.5.8  Enhanced Quadrature Encoder Pulse (EQEP)
      9. 8.5.9  General-Purpose Interface (GPIO)
      10. 8.5.10 General-Purpose Memory Controller (GPMC)
      11. 8.5.11 Global Timebase Counter (GTC)
      12. 8.5.12 Inter-Integrated Circuit (I2C)
      13. 8.5.13 Modular Controller Area Network (MCAN)
      14. 8.5.14 Multichannel Audio Serial Port (MCASP)
      15. 8.5.15 Multichannel Serial Peripheral Interface (MCSPI)
      16. 8.5.16 Multi-Media Card Secure Digital (MMCSD)
      17. 8.5.17 Octal Serial Peripheral Interface (OSPI)
      18. 8.5.18 Timers
      19. 8.5.19 Universal Asynchronous Receiver/Transmitter (UART)
      20. 8.5.20 Universal Serial Bus Subsystem (USBSS)
  10. 9 Applications, Implementation, and Layout
    1. 9.1 Device Connection and Layout Fundamentals
      1. 9.1.1 Power Supply
        1. 9.1.1.1 Power Supply Designs
        2. 9.1.1.2 Power Distribution Network Implementation Guidance
      2. 9.1.2 External Oscillator
      3. 9.1.3 JTAG, EMU, and TRACE
      4. 9.1.4 Unused Pins
    2. 9.2 Peripheral- and Interface-Specific Design Information
      1. 9.2.1 DDR Board Design and Layout Guidelines
      2. 9.2.2 OSPI/QSPI/SPI Board Design and Layout Guidelines
        1. 9.2.2.1 No Loopback, Internal PHY Loopback, and Internal Pad Loopback
        2. 9.2.2.2 External Board Loopback
        3. 9.2.2.3 DQS (only available in Octal SPI devices)
      3. 9.2.3 USB VBUS Design Guidelines
      4. 9.2.4 System Power Supply Monitor Design Guidelines
      5. 9.2.5 High Speed Differential Signal Routing Guidance
      6. 9.2.6 Thermal Solution Guidance
    3. 9.3 Clock Routing Guidelines
      1. 9.3.1 Oscillator Routing
  11. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
      1. 10.1.1 Standard Package Symbolization
      2. 10.1.2 Device Naming Convention
    2. 10.2 Tools and Software
    3. 10.3 Documentation Support
    4. 10.4 支持资源
    5. 10.5 Trademarks
    6. 10.6 静电放电警告
    7. 10.7 术语表
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Packaging Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • AMB|484
散热焊盘机械数据 (封装 | 引脚)
订购信息
7.10.5.1.3 CPSW3G RGMII Timing

Table 7-33, Table 7-34, Table 7-35, Figure 7-30, Table 7-36, Table 7-37, and Figure 7-31 present timing conditions, requirements, and switching characteristics for CPSW3G RGMII.

Table 7-33 CPSW3G RGMII Timing Conditions
PARAMETER MIN MAX UNIT
INPUT CONDITIONS
SRI Input slew rate 2.64 5 V/ns
OUTPUT CONDITIONS
CL Output load capacitance 2 20 pF
PCB CONNECTIVITY REQUIREMENTS
td(Trace Mismatch Delay) Propagation delay mismatch across all traces RGMII[x]_RXC, RGMII[x]_RD[3:0], RGMII[x]_RX_CTL 50 ps
RGMII[x]_TXC, RGMII[x]_TD[3:0], RGMII[x]_TX_CTL 50 ps
Table 7-34 RGMII[x]_RXC Timing Requirements – RGMII Mode see Figure 7-30
NO. PARAMETER DESCRIPTION MODE MIN MAX UNIT
RGMII1 tc(RXC) Cycle time, RGMII[x]_RXC 10Mbps 360 440 ns
100Mbps 36 44 ns
1000Mbps 7.2 8.8 ns
RGMII2 tw(RXCH) Pulse duration, RGMII[x]_RXC high 10Mbps 160 240 ns
100Mbps 16 24 ns
1000Mbps 3.6 4.4 ns
RGMII3 tw(RXCL) Pulse duration, RGMII[x]_RXC low 10Mbps 160 240 ns
100Mbps 16 24 ns
1000Mbps 3.6 4.4 ns
Table 7-35 RGMII[x]_RD[3:0], and RGMII[x]_RX_CTL Timing Requirements – RGMII Mode see Figure 7-30
NO. PARAMETER DESCRIPTION MODE MIN MAX UNIT
RGMII4 tsu(RD-RXC) Setup time, RGMII[x]_RD[3:0] valid before RGMII[x]_RXC high/low 10Mbps 1 ns
100Mbps 1 ns
1000Mbps 1 ns
tsu(RX_CTL-RXC) Setup time, RGMII[x]_RX_CTL valid before RGMII[x]_RXC high/low 10Mbps 1 ns
100Mbps 1 ns
1000Mbps 1 ns
RGMII5 th(RXC-RD) Hold time, RGMII[x]_RD[3:0] valid after RGMII[x]_RXC high/low 10Mbps 1 ns
100Mbps 1 ns
1000Mbps 1 ns
th(RXC-RX_CTL) Hold time, RGMII[x]_RX_CTL valid after RGMII[x]_RXC high/low 10Mbps 1 ns
100Mbps 1 ns
1000Mbps 1 ns
GUID-A137A263-80C7-48B9-9967-A1D0D062A800-low.gif
A. RGMII[x]_RXC must be externally delayed relative to the data and control pins.
B. Data and control information is received using both edges of the clocks. RGMII[x]_RD[3:0] carries data bits 3-0 on the rising edge of RGMII[x]_RXC and data bits 7-4 on the falling edge of RGMII[x]_RXC. Similarly, RGMII[x]_RX_CTL carries RXDV on rising edge of RGMII[x]_RXC and RXERR on falling edge of RGMII[x]_RXC.
Figure 7-30 CPSW3G RGMII[x]_RXC, RGMII[x]_RD[3:0], RGMII[x]_RX_CTL Timing Requirements - RGMII Mode
Table 7-36 RGMII[x]_TXC Switching Characteristics – RGMII Mode see Figure 7-31
NO. PARAMETER DESCRIPTION MODE MIN MAX UNIT
RGMII6 tc(TXC) Cycle time, RGMII[x]_TXC 10Mbps 360 440 ns
100Mbps 36 44 ns
1000Mbps 7.2 8.8 ns
RGMII7 tw(TXCH) Pulse duration, RGMII[x]_TXC high 10Mbps 160 240 ns
100Mbps 16 24 ns
1000Mbps 3.6 4.4 ns
RGMII8 tw(TXCL) Pulse duration, RGMII[x]_TXC low 10Mbps 160 240 ns
100Mbps 16 24 ns
1000Mbps 3.6 4.4 ns
Table 7-37 RGMII[x]_TD[3:0] and RGMII[x]_TX_CTL Switching Characteristics – RGMII Mode see Figure 7-31
NO. PARAMETER DESCRIPTION MODE MIN MAX UNIT
RGMII9 tosu(TD-TXC) Output setup time(1), RGMII[x]_TD[3:0] valid to RGMII[x]_TXC high/low 10Mbps 1.2 ns
100Mbps 1.2 ns
1000Mbps 1.2 ns
tosu(TX_CTL-TXC) Output setup time(1), RGMII[x]_TX_CTL valid to RGMII[x]_TXC high/low 10Mbps 1.2 ns
100Mbps 1.2 ns
1000Mbps 1.2 ns
RGMII10 toh(TXC-TD) Output hold time(1), RGMII[x]_TD[3:0] valid after RGMII[x]_TXC high/low 10Mbps 1.2 ns
100Mbps 1.2 ns
1000Mbps 1.2 ns
toh(TXC-TX_CTL) Output hold time(1), RGMII[x]_TX_CTL valid after RGMII[x]_TXC high/low 10Mbps 1.2 ns
100Mbps 1.2 ns
1000Mbps 1.2 ns
(1) Output setup/hold times are defining a delay relationship of the transmit data and control outputs relative to the transmit clock output, but this output relationship is being presented as the minimum setup/hold times provided to the attached receiver. This approach matches how the output timing relationships are defined in the RGMII specification.
GUID-F682CAA4-3CBA-4CDC-AEFA-B66F130A2B53-low.gif
A. TXC is delayed internally before being driven to the RGMII[x]_TXC pin. This internal delay is always enabled.
B. Data and control information is received using both edges of the clocks. RGMII[x]_TD[3:0] carries data bits 3-0 on the rising edge of RGMII[x]_TXC and data bits 7-4 on the falling edge of RGMII[x]_TXC. Similarly, RGMII[x]_TX_CTL carries TXEN on rising edge of RGMII[x]_TXC and TXERR on falling edge of RGMII[x]_TXC.
Figure 7-31 CPSW3G RGMII[x]_TXC, RGMII[x]_TD[3:0], and RGMII[x]_TX_CTL Switching Characteristics - RGMII Mode
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |