SBASB14 October 2024 AMC0311S-Q1
ADVANCE INFORMATION
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Device Comparison Table
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information (D Package)
- 6.5 Thermal Information (DWV Package)
- 6.6 Power Ratings
- 6.7 Insulation Specifications (Basic Isolation)
- 6.8 Insulation Specifications (Reinforced Isolation)
- 6.9 Safety-Related Certifications (Basic Isolation)
- 6.10 Safety-Related Certifications (Reinforced Isolation)
- 6.11 Safety Limiting Values (D Package)
- 6.12 Safety Limiting Values (DWV Package)
- 6.13 Electrical Characteristics
- 6.14 Switching Characteristics
- 6.15 Timing Diagram
- 7 Detailed Description
- 8 Application and Implementation
- 9 Power Supply Recommendations
- 10Layout
- 11Device and Documentation Support
- 12Revision History
- 13Mechanical, Packaging, and Orderable Information
5 Pin Configuration and Functions
Figure 5-1 DWV and D Package,8-pin SOIC(Top
View)Table 5-1 Pin Functions
| PIN | TYPE | DESCRIPTION | |
|---|---|---|---|
| NO. | NAME | ||
| 1 | VDD1 | High-side power | High-side power supply(1) |
| 2 | INP | Analog input | Analog input |
| 3 | SNSN | Analog input | GND1 sense pin and inverting analog input to the modulator. Connect to GND1. |
| 4 | GND1 | High-side ground | High-side analog ground |
| 5 | GND2 | Low-side ground | Low-side analog ground |
| 6 | REFIN | Analog input | The voltage applied to this pin is added as an offset to the output voltage of the device. Internally, a 90kΩ resistor is connected from REFIN to GND2. Connect to GND2 if not used. |
| 7 | OUT | Analog output | Analog output |
| 8 | VDD2 | Low-side power | Low-side power supply(1) |
(1) See the Power Supply Recommendations section for power-supply decoupling recommendations.