米6体育平台手机版

ZHCSPG7 February 2022 AMC1306M25-Q1

PRODUCTION DATA

6.11 Typical Characteristics

at AVDD = 5 V, DVDD = 3.3 V, INP = –250 mV to 250 mV, INN = AGND, f_CLKIN = 20 MHz, and sinc³ filter with OSR = 256 (unless otherwise noted)

Figure 6-6 Maximum Operating Common-Mode Input Voltage vs High-Side Supply Voltage

Figure 6-8 Input Bias Current vs Common-Mode Input Voltage

Figure 6-10 Integral Nonlinearity vs Temperature

Figure 6-12 Offset Error vs Temperature

Figure 6-14 Gain Error vs High-Side Supply Voltage

Figure 6-16 Gain Error vs Clock Frequency

Figure 6-18 Signal-to-Noise Ratio and Signal-to-Noise + Distortion vs High-Side Supply Voltage

Figure 6-20 Signal-to-Noise Ratio and Signal-to-Noise + Distortion vs Clock Frequency

Figure 6-22 Signal-to-Noise Ratio and Signal-to-Noise + Distortion vs Input Signal Amplitude

f_CLKIN = 20 MHz

Figure 6-24 Total Harmonic Distortion vs High-Side Supply Voltage (3.3 V, nom)

Figure 6-26 Total Harmonic Distortion vs Clock Frequency

Figure 6-28 Total Harmonic Distortion vs Input Signal Amplitude

Figure 6-30 Spurious-Free Dynamic Range vs Temperature

Figure 6-32 Spurious-Free Dynamic Range vs Input Signal Frequency

4096-point FFT, V_IN = 500 mV_PP

Figure 6-34 Frequency Spectrum With 1-kHz Input Signal

Figure 6-36 Supply Current vs Supply Voltage

Figure 6-38 Supply Current vs Clock Frequency

Figure 6-7 Common-Mode Overvoltage Detection Level vs Temperature

Figure 6-9 Common-Mode Rejection Ratio vs Input Signal Frequency

Figure 6-11 Offset Error vs High-Side Supply Voltage

Figure 6-13 Offset Error vs Clock Frequency

Figure 6-15 Gain Error vs Temperature

Figure 6-17 Power-Supply Rejection Ratio vs Ripple Frequency

Figure 6-19 Signal-to-Noise Ratio and Signal-to-Noise + Distortion vs Temperature

Figure 6-21 Signal-to-Noise Ratio and Signal-to-Noise + Distortion vs Input Signal Frequency

f_CLKIN = 21 MHz

Figure 6-23 Total Harmonic Distortion vs High-Side Supply Voltage (5 V, nom)

Figure 6-25 Total Harmonic Distortion vs Temperature

Figure 6-27 Total Harmonic Distortion vs Input Signal Frequency

Figure 6-29 Spurious-Free Dynamic Range vs High-Side Supply Voltage

Figure 6-31 Spurious-Free Dynamic Range vs Clock Frequency

Figure 6-33 Spurious-Free Dynamic Range vs Input Signal Amplitude

4096-point FFT, V_IN = 500 mV_PP

Figure 6-35 Frequency Spectrum With 10-kHz Input Signal

Figure 6-37 Supply Current vs Temperature