米6体育平台手机版

ZHCSLN5D december 2010 – september 2020 BQ24133

PRODUCTION DATA

8.6 Typical Characteristics

Table 8-1 Table of Graphs⁽¹⁾

FIGURE	DESCRIPTION
Figure 8-1	AVCC, VREF, ACDRV and STAT Power Up (ISET=0)
Figure 8-2	Charge Enable by ISET
Figure 8-3	Current Soft Start
Figure 8-4	Charge Disable by ISET
Figure 8-5	Continuous Conduction Mode Switching
Figure 8-6	Discontinuous Conduction Mode Switching
Figure 8-7	BATFET to ACFET Transition during Power Up
Figure 8-8	System Load Transient (Input Current DPM)
Figure 8-9	Battery Insertion and Removal
Figure 8-10	Battery to Ground Short Protection
Figure 8-11	Battery to Ground Short Transition
Figure 8-12	Efficiency vs Output Current (V_OUT = 3.8 V)
Figure 10-4	Efficiency vs Output Current (2-3 cell)

(1) All waveforms and data are measured on HPA715 EVM.

Figure 8-1 Power Up (ISET = 0)

Figure 8-3 Current Soft Start

Figure 8-5 Continuous Conduction Mode Switching

Figure 8-7 BATFET to ACFET Transition During Power Up

Figure 8-9 Battery Insertion and Removal

Figure 8-11 Battery to Ground Short Transition

Figure 8-2 Charge Enable by ISET

Figure 8-4 Charge Disable by ISET

Figure 8-6 Discontinuous Conduction Mode Switching

Figure 8-8 System Load Transient (Input current DPM)

Figure 8-10 Battery to Ground Short Protection

Figure 8-12 Efficiency vs Output Current