ZHCSQ71 March   2022 CC1311P3

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 功能方框图
  5. 5 Revision History
  6. 6 Device Comparison
  7. 7 Pin Configuration and Functions
    1. 7.1 Pin Diagram – RGZ Package (Top View)
    2. 7.2 Signal Descriptions – RGZ Package
    3. 7.3 Connections for Unused Pins and Modules
  8. 8 Specifications
    1. 8.1  Absolute Maximum Ratings
    2. 8.2  ESD Ratings
    3. 8.3  Recommended Operating Conditions
    4. 8.4  Power Supply and Modules
    5. 8.5  Power Consumption - Power Modes
    6. 8.6  Power Consumption - Radio Modes
    7. 8.7  Nonvolatile (Flash) Memory Characteristics
    8. 8.8  Thermal Resistance Characteristics
    9. 8.9  RF Frequency Bands
    10. 8.10 861 MHz to 1054 MHz - Receive (RX)
    11. 8.11 861 MHz to 1054 MHz - Transmit (TX) 
    12. 8.12 861 MHz to 1054 MHz - PLL Phase Noise Wideband Mode
    13. 8.13 861 MHz to 1054 MHz - PLL Phase Noise Narrowband Mode
    14. 8.14 359 MHz to 527 MHz - Receive (RX)
    15. 8.15 359 MHz to 527 MHz - Transmit (TX) 
    16. 8.16 359 MHz to 527 MHz - PLL Phase Noise
    17. 8.17 Timing and Switching Characteristics
      1. 8.17.1 Reset Timing
      2. 8.17.2 Wakeup Timing
      3. 8.17.3 Clock Specifications
        1. 8.17.3.1 48 MHz Crystal Oscillator (XOSC_HF)
        2. 8.17.3.2 48 MHz RC Oscillator (RCOSC_HF)
        3. 8.17.3.3 32.768 kHz Crystal Oscillator (XOSC_LF)
        4. 8.17.3.4 32 kHz RC Oscillator (RCOSC_LF)
      4. 8.17.4 Synchronous Serial Interface (SSI) Characteristics
        1. 8.17.4.1 Synchronous Serial Interface (SSI) Characteristics
        2.       38
      5. 8.17.5 UART
        1. 8.17.5.1 UART Characteristics
    18. 8.18 Peripheral Characteristics
      1. 8.18.1 ADC
        1. 8.18.1.1 Analog-to-Digital Converter (ADC) Characteristics
      2. 8.18.2 DAC
        1. 8.18.2.1 Digital-to-Analog Converter (DAC) Characteristics
      3. 8.18.3 Temperature and Battery Monitor
        1. 8.18.3.1 Temperature Sensor
        2. 8.18.3.2 Battery Monitor
      4. 8.18.4 Comparator
        1. 8.18.4.1 Continuous Time Comparator
      5. 8.18.5 GPIO
        1. 8.18.5.1 GPIO DC Characteristics
    19. 8.19 Typical Characteristics
      1. 8.19.1 MCU Current
      2. 8.19.2 RX Current
      3. 8.19.3 TX Current
      4. 8.19.4 RX Performance
      5. 8.19.5 TX Performance
      6. 8.19.6 ADC Performance
  9. 9 Detailed Description
    1. 9.1  Overview
    2. 9.2  System CPU
    3. 9.3  Radio (RF Core)
      1. 9.3.1 Proprietary Radio Formats
    4. 9.4  Memory
    5. 9.5  Cryptography
    6. 9.6  Timers
    7. 9.7  Serial Peripherals and I/O
    8. 9.8  Battery and Temperature Monitor
    9. 9.9  µDMA
    10. 9.10 Debug
    11. 9.11 Power Management
    12. 9.12 Clock Systems
    13. 9.13 Network Processor
  10. 10Application, Implementation, and Layout
    1. 10.1 Reference Designs
  11. 11Device and Documentation Support
    1. 11.1 Device Nomenclature
    2. 11.2 Tools and Software
      1. 11.2.1 SimpleLink™ Microcontroller Platform
    3. 11.3 Documentation Support
    4. 11.4 支持资源
    5. 11.5 Trademarks
    6. 11.6 Electrostatic Discharge Caution
    7. 11.7 术语表
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • RGZ|48
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.18.5.1 GPIO DC Characteristics

PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
TA = 25 °C, VDDS = 1.8 V
GPIO VOH at 8 mA load IOCURR = 2, high-drive GPIOs only 1.56 V
GPIO VOL at 8 mA load IOCURR = 2, high-drive GPIOs only 0.24 V
GPIO VOH at 4 mA load IOCURR = 1 1.59 V
GPIO VOL at 4 mA load IOCURR = 1 0.21 V
GPIO pullup current Input mode, pullup enabled, Vpad = 0 V 73 µA
GPIO pulldown current Input mode, pulldown enabled, Vpad = VDDS 19 µA
GPIO low-to-high input transition, with hysteresis IH = 1, transition voltage for input read as 0 → 1 1.08 V
GPIO high-to-low input transition, with hysteresis IH = 1, transition voltage for input read as 1 → 0 0.73 V
GPIO input hysteresis IH = 1, difference between 0 → 1
and 1 → 0 points		 0.35 V
TA = 25 °C, VDDS = 3.0 V
GPIO VOH at 8 mA load IOCURR = 2, high-drive GPIOs only 2.59 V
GPIO VOL at 8 mA load IOCURR = 2, high-drive GPIOs only 0.42 V
GPIO VOH at 4 mA load IOCURR = 1 2.63 V
GPIO VOL at 4 mA load IOCURR = 1 0.40 V
TA = 25 °C, VDDS = 3.8 V
GPIO pullup current Input mode, pullup enabled, Vpad = 0 V 282 µA
GPIO pulldown current Input mode, pulldown enabled, Vpad = VDDS 110 µA
GPIO low-to-high input transition, with hysteresis IH = 1, transition voltage for input read as 0 → 1 1.97 V
GPIO high-to-low input transition, with hysteresis IH = 1, transition voltage for input read as 1 → 0 1.55 V
GPIO input hysteresis IH = 1, difference between 0 → 1
and 1 → 0 points		 0.42 V
TA = 25 °C
VIH Lowest GPIO input voltage reliably interpreted as a High 0.8*VDDS V
VIL Highest GPIO input voltage reliably interpreted as a Low 0.2*VDDS V
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |