米6体育平台手机版

ZHCSHI1H january 2018 – november 2020 CC1312R

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

RGZ|48

散热焊盘机械数据 (封装 | 引脚)

RGZ|48
- QFND031W

订购信息

8.11 861 MHz to 1054 MHz - Transmit (TX)

When measured on the CC1312REM-XD7793 reference design with T_c = 25 °C, V_DDS = 3.0 V with
DC/DC enabled unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX path. All measurements are performed conducted. ⁽¹⁾

PARAMETER		TEST CONDITIONS	TYP	UNIT
General parameters
Max output power, boost mode		VDDR = 1.95 V Minimum supply voltage (VDDS ) for boost mode is 2.1 V 868 MHz and 915 MHz	14	dBm
Max output power		868 MHz and 915 MHz	12	dBm
Output power programmable range		868 MHz and 915 MHz	24	dB
Output power variation over temperature		+10 dBm setting Over recommended temperature operating range	±2	dB
Output power variation over temperature Boost mode		+14 dBm setting Over recommended temperature operating range	±1.5	dB
Spurious emissions and harmonics
Spurious emissions (excluding harmonics) ⁽²⁾	30 MHz to 1 GHz	+14 dBm setting ETSI restricted bands	< -54	dBm
	30 MHz to 1 GHz	+14 dBm setting ETSI outside restricted bands	< -36	dBm
	1 GHz to 12.75 GHz (outside ETSI restricted bands)	+14 dBm setting measured in 1 MHz bandwidth (ETSI)	< -30	dBm
Adjacent Channel Power	9.6 kbps, ±2.4 kHz deviation, 2-GFSK, 20 kHz channel spacing. Narrowband mode.	Adjacent channel (ETSI EN 300 220 requirement). TxPower = 12.5 dBm. 868 MHz	-24	dBm
Alternate Channel Power	9.6 kbps, ±2.4 kHz deviation, 2-GFSK, 20 kHz channel spacing. Narrowband mode.	Alternate channel (ETSI EN 300 220 requirement). TxPower = 12.5 dBm. 868 MHz	-31	dBm
Spurious emissions out-of-band, 915 MHz ⁽²⁾	30 MHz to 88 MHz (within FCC restricted bands)	+14 dBm setting	< -56	dBm
	88 MHz to 216 MHz (within FCC restricted bands)	+14 dBm setting	< -52	dBm
	216 MHz to 960 MHz (within FCC restricted bands)	+14 dBm setting	< -50	dBm
	960 MHz to 2390 MHz and above 2483.5 MHz (within FCC restricted band)	+14 dBm setting	<-42	dBm
	1 GHz to 12.75 GHz (outside FCC restricted bands)	+14 dBm setting	< -40	dBm
Spurious emissions out-of-band, 920.6/928 MHz ⁽²⁾	Below 710 MHz (ARIB T-108)	+14 dBm setting	< -36	dBm
	710 MHz to 900 MHz (ARIB T-108)	+14 dBm setting	< -55	dBm
	900 MHz to 915 MHz (ARIB T-108)	+14 dBm setting	< -55	dBm
	930 MHz to 1000 MHz (ARIB T-108)	+14 dBm setting	< -55	dBm
	1000 MHz to 1215 MHz (ARIB T-108)	+14 dBm setting	< -45	dBm
	Above 1215 MHz (ARIB T-108)	+14 dBm setting	< -30	dBm
Harmonics	Second harmonic	+14 dBm setting, 868 MHz	< -30	dBm
	Second harmonic	+14 dBm setting, 915 MHz	< -30	dBm
	Third harmonic	+14 dBm setting, 868 MHz	< -30	dBm
	Third harmonic	+14 dBm setting, 915 MHz	< -42	dBm
	Fourth harmonic	+14 dBm setting, 868 MHz	< -30	dBm
	Fourth harmonic	+14 dBm setting, 915 MHz	< -30	dBm
	Fifth harmonic	+14 dBm setting, 868 MHz	< -30	dBm
	Fifth harmonic	+14 dBm setting, 915 MHz	< -42	dBm

(1) Some combinations of frequency, data rate and modulation format requires use of external crystal load capacitors for regulatory compliance. More details can be found in the device errata.

(2) Suitable for systems targeting compliance with EN 300 220, EN 303 131, EN 303 204, FCC CFR47 Part 15, ARIB STD-T108.