米6体育平台手机版

ZHCSQD6 March 2022 CC2651P3

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

RGZ|48
RKP|40

散热焊盘机械数据 (封装 | 引脚)

RKP|40
- QFND309E
RGZ|48
- QFND031W

订购信息

8.13 Zigbee - IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps) - TX

Measured on the CC26x1-P3EM-7XD24-PA24 reference design with T_c = 25 °C, V_DDS = 3.0 V, f_RF= 2440 MHz with
DC/DC enabled and high power PA connected to V_DDS unless otherwise noted.
All measurements are performed at the antenna input with a combined RX and TX path, except for high power PA which is measured at a dedicated antenna connection. All measurements are performed conducted.

PARAMETER	TEST CONDITIONS		TYP	UNIT
General Parameters
Max output power, high power PA	Differential mode, delivered to a single-ended 50-Ω load through a balun		20	dBm
Output power programmable range, high power PA	Differential mode, delivered to a single-ended 50-Ω load through a balun		6	dB
Max output power, high power PA, 10 dBm configuration⁽⁴⁾	Differential mode, delivered to a single-ended 50-Ω load through a balun		10.5	dBm
Max output power, high power PA, 10 dBm configuration(5)	Single-ended mode. Measured on CC26x1-P3EM-5XS24, delivered to a single-ended 50-Ω load through a balun		9	dBm
Output power programmable range, high power PA, 10 dBm configuration⁽⁴⁾	Differential mode, delivered to a single-ended 50-Ω load through a balun		5	dB
Max output power, regular PA	Differential mode, delivered to a single-ended 50-Ω load through a balun		5	dBm
Output power programmable range, regular PA	Differential mode, delivered to a single-ended 50-Ω load through a balun		26	dB
Spurious emissions and harmonics
Spurious emissions, high-power PA⁽²⁾	f < 1 GHz, outside restricted bands	+20 dBm setting	< -39	dBm
	f < 1 GHz, restricted bands FCC		< -49	dBm
	f > 1 GHz, including harmonics		-40	dBm
Harmonics, high-power PA⁽³⁾	Second harmonic		-35	dBm
Harmonics, high-power PA⁽³⁾	Third harmonic		-42	dBm
Spurious emissions, high-power PA, 10 dBm configuration⁽²⁾⁽⁴⁾	f < 1 GHz, outside restricted bands	+10 dBm setting⁽⁴⁾	< -36	dBm
	f < 1 GHz, restricted bands ETSI		< -47	dBm
	f < 1 GHz, restricted bands FCC		< -55	dBm
	f > 1 GHz, including harmonics		-42	dBm
Harmonics, high-power PA, 10 dBm configuration⁽⁴⁾	Second harmonic		< -42	dBm
Harmonics, high-power PA, 10 dBm configuration⁽⁴⁾	Third harmonic		< -42	dBm
Spurious emissions, regular PA⁽¹⁾	f < 1 GHz, outside restricted bands	+5 dBm setting	< -36	dBm
	f < 1 GHz, restricted bands ETSI		< -47	dBm
	f < 1 GHz, restricted bands FCC		< -55	dBm
	f > 1 GHz, including harmonics		< –42	dBm
Harmonics, regular PA	Second harmonic		< -42	dBm
Harmonics, regular PA	Third harmonic		< -42	dBm
IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps)
Error vector magnitude, high power PA	+20 dBm setting		2	%
Error vector magnitude, high power PA, 10 dBm configuration⁽⁴⁾	+10 dBm setting		2	%
Error vector magnitude Regular PA	+5 dBm setting		2	%

(1) To ensure margins for passing FCC band edge requirements at 2483.5 MHz, a lower than maximum output-power setting or less than 100% duty cycle may be used when operating at 2480 MHz.

(2) To ensure margins for passing FCC band edge requirements at 2483.5 MHz, a lower than maximum output-power setting or less than 100% duty cycle may be used when operating at the upper 802.15.4 channel(s).

(3) To ensure margins for passing FCC requirements for harmonic emission, duty cycling may be required. The CC2651P3 LaunchPad reference design should also be reviewed as the filter provides higher attenuation of harmonics compared to the CC26x1-P3EM-7XD24-PA24 reference design.

(4) Measured on evaluation board as described in https://www.ti.com/lit/pdf/swra636.