The following reference designs should be
followed closely when implementing designs using the CC2651R3SIPA device.
Special attention must be paid to RF
component placement, decoupling capacitors and DCDC regulator components, as well as ground
connections for all of these.
CC2651RSIPA-EM Design Files
The CC2651RSIP-EM reference design provides schematic, layout and production files for
the characterization board used for deriving the performance number found in this
document.
LP-CC2651R3SIPA Design Files
The CC2651R3SIPA LaunchPad Design Files contain detailed schematics and layouts to
build application specific boards using the CC2651R3SIPA device.
Sub-1 GHz and 2.4 GHz Antenna Kit for LaunchPad™ Development Kit and
SensorTag
The antenna kit allows real-life testing to identify the optimal antenna for your
application. The antenna kit includes 16 antennas for frequencies from 169 MHz to
2.4 GHz, including:
- PCB antennas
- Helical antennas
- Chip antennas
- Dual-band antennas for 868 MHz and 915 MHz combined with
2.4 GHz
The antenna kit includes a JSC cable to connect to the Wireless MCU LaunchPad
Development Kits and SensorTags.