米6体育平台手机版

ZHCSQP2B February 2021 – September 2022 CC2652PSIP

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

MOT|48
- MPQF581B

散热焊盘机械数据 (封装 | 引脚)

订购信息

8.11 Bluetooth Low Energy - Transmit (TX)

Measured on the CC2652xSIP-EM reference design with T_c = 25 °C, V_DDS = 3.0 V, f_RF= 2440 MHz with
DC/DC enabled and high power PA connected to V_DDS unless otherwise noted.
All measurements are performed at the antenna input with a combined RX and TX path, except for high power PA which is measured at a dedicated antenna connection. All measurements are performed conducted.

PARAMETER	TEST CONDITIONS		TYP	UNIT
General Parameters
Max output power, high power PA, 10 dBm configuration(1)(2)	Differential mode, delivered to a single-ended 50 Ω load through a balun		10.5	dBm
Output power programmable range high power PA, 10 dBm configuration	Differential mode, delivered to a single-ended 50 Ω load through a balun		5	dB
Max output power, regular PA	Differential mode, delivered to a single-ended 50 Ω load through a balun		5	dBm
Output power programmable range, regular PA	Differential mode, delivered to a single-ended 50 Ω load through a balun		26	dB
Spurious emissions and harmonics
Spurious emissions, high-power PA, 10 dBm configuration(2)	f < 1 GHz, outside restricted bands	+10 dBm setting	< -36	dBm
	f < 1 GHz, restricted bands ETSI		< -54	dBm
	f < 1 GHz, restricted bands FCC		< -55	dBm
	f > 1 GHz, including harmonics		-41	dBm
Harmonics, high-power PA, 10 dBm configuration(1)	Second harmonic		< -42	dBm
Harmonics, high-power PA, 10 dBm configuration(1)	Third harmonic		< -42	dBm
Spurious emissions, regular PA	f < 1 GHz, outside restricted bands	+5 dBm setting	< –36	dBm
	f < 1 GHz, restricted bands ETSI		< –54	dBm
	f < 1 GHz, restricted bands FCC		< –55	dBm
	f > 1 GHz, including harmonics		< –42	dBm
Harmonics, regular PA	Second harmonic		< -42	dBm
Harmonics, regular PA	Third harmonic		< -42	dBm

(1) To meet the FCC 15.247 Part 15 (US) harmonic requirement at full output power, the max allowable antenna gain is 1.9 dBi. Output power is limited to 9 dBm when using a max antenna gain of 3.3 dBi.

(2) To meet the ETSI EN 300 328 (Europe) 10 dBm/MHz Power Spectral Density (PSD) requirement, output power is limited to 7 dBm and 6 dBm when using a max antenna gain of 1.9 dBi and 3.3 dBi, respectively.