米6体育平台手机版

ZHCSJF3D February 2019 – February 2021 CC2652RB

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

RGZ|48

散热焊盘机械数据 (封装 | 引脚)

RGZ|48
- QFND031W

订购信息

8.10 Bluetooth Low Energy - Receive (RX)

When measured on the CC26x2RBEM-7ID reference design with T_c = 25 °C, V_DDS = 3.0 V, f_RF= 2440 MHz with
DC/DC enabled unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX path.
All measurements are performed conducted.

PARAMETER	TEST CONDITIONS	TYP	UNIT
125 kbps (LE Coded)
Receiver sensitivity	Differential mode. BER = 10^–3	–102	dBm
Receiver saturation	Differential mode. BER = 10^–3	>5	dBm
Frequency error tolerance	Difference between the incoming carrier frequency and the internally generated carrier frequency	> (–300 / 300)	kHz
Data rate error tolerance	Difference between incoming data rate and the internally generated data rate (37-byte packets)	> (–240 / 240)	ppm
Data rate error tolerance	Difference between incoming data rate and the internally generated data rate (255-byte packets)	> (–125 / 125)	ppm
Co-channel rejection⁽¹⁾	Wanted signal at –79 dBm, modulated interferer in channel, BER = 10^–3	–1.5	dB
Selectivity, ±1 MHz⁽¹⁾	Wanted signal at –79 dBm, modulated interferer at ±1 MHz, BER = 10^–3, measured at input level –82 dBm	8 / 2⁽²⁾	dB
Selectivity, ±2 MHz⁽¹⁾	Wanted signal at –79 dBm, modulated interferer at ±2 MHz, BER = 10^–3, measured at input level –82 dBm	44 / 39⁽²⁾	dB
Selectivity, ±3 MHz⁽¹⁾	Wanted signal at –79 dBm, modulated interferer at ±3 MHz, BER = 10^–3, measured at input level –82 dBm	46 / 44⁽²⁾	dB
Selectivity, ±4 MHz⁽¹⁾	Wanted signal at –79 dBm, modulated interferer at ±4 MHz, BER = 10^–3, measured at input level –82 dBm	44 / 46⁽²⁾	dB
Selectivity, ±6 MHz⁽¹⁾	Wanted signal at –79 dBm, modulated interferer at ≥ ±6 MHz, BER = 10^–3, measured at input level –82 dBm	48 / 44⁽²⁾	dB
Selectivity, ±7 MHz	Wanted signal at –79 dBm, modulated interferer at ≥ ±7 MHz, BER = 10^–3, measured at input level –82 dBm	51 / 45⁽²⁾	dB
Selectivity, Image frequency⁽¹⁾	Wanted signal at –79 dBm, modulated interferer at image frequency, BER = 10^–3, measured at input level –82 dBm	39	dB
Selectivity, Image frequency ±1 MHz⁽¹⁾	Note that Image frequency + 1 MHz is the Co- channel –1 MHz. Wanted signal at –79 dBm, modulated interferer at ±1 MHz from image frequency, BER = 10^–3, measured at input level –82 dBm	2 / 44 ⁽²⁾	dB
500 kbps (LE Coded)
Receiver sensitivity	Differential mode. BER = 10^–3	–100	dBm
Receiver saturation	Differential mode. BER = 10^–3	> 5	dBm
Frequency error tolerance	Difference between the incoming carrier frequency and the internally generated carrier frequency	> (–300 / 300)	kHz
Data rate error tolerance	Difference between incoming data rate and the internally generated data rate (37-byte packets)	> (–450 / 450)	ppm
Data rate error tolerance	Difference between incoming data rate and the internally generated data rate (255-byte packets)	> (–175 / 175)	ppm
Co-channel rejection⁽¹⁾	Wanted signal at –72 dBm, modulated interferer in channel, BER = 10^–3	–3.5	dB
Selectivity, ±1 MHz⁽¹⁾	Wanted signal at –72 dBm, modulated interferer at ±1 MHz, BER = 10^–3, measured at input level –75 dBm	5 / -1⁽²⁾	dB
Selectivity, ±2 MHz⁽¹⁾	Wanted signal at –72 dBm, modulated interferer at ±2 MHz, BER = 10^–3, measured at input level –75 dBm	44 / 37⁽²⁾	dB
Selectivity, ±3 MHz⁽¹⁾	Wanted signal at –72 dBm, modulated interferer at ±3 MHz, BER = 10^–3, measured at input level –75 dBm	46 / 46⁽²⁾	dB
Selectivity, ±4 MHz⁽¹⁾	Wanted signal at –72 dBm, modulated interferer at ±4 MHz, BER = 10^–3, measured at input level –75 dBm	45 / 47⁽²⁾	dB
Selectivity, ±6 MHz⁽¹⁾	Wanted signal at –72 dBm, modulated interferer at ≥ ±6 MHz, BER = 10^–3, measured at input level –75 dBm	46 / 45⁽²⁾	dB
Selectivity, ±7 MHz	Wanted signal at –72 dBm, modulated interferer at ≥ ±7 MHz, BER = 10^–3, measured at input level –75 dBm	49 / 45⁽²⁾	dB
Selectivity, Image frequency⁽¹⁾	Wanted signal at –72 dBm, modulated interferer at image frequency, BER = 10^–3, measured at input level –75 dBm	37	dB
Selectivity, Image frequency ±1 MHz⁽¹⁾	Note that Image frequency + 1 MHz is the Co- channel –1 MHz. Wanted signal at –72 dBm, modulated interferer at ±1 MHz from image frequency, BER = 10^–3, measured at input level –75 dBm	-1 / 46⁽²⁾	dB
1 Mbps (LE 1M)
Receiver sensitivity	Differential mode. BER = 10^–3	–97	dBm
Receiver saturation	Differential mode. BER = 10^–3	> 5	dBm
Frequency error tolerance	Difference between the incoming carrier frequency and the internally generated carrier frequency	> (–350 / 350)	kHz
Data rate error tolerance	Difference between incoming data rate and the internally generated data rate (37-byte packets)	> (–750 / 750)	ppm
Co-channel rejection⁽¹⁾	Wanted signal at –67 dBm, modulated interferer in channel, BER = 10^–3	–6	dB
Selectivity, ±1 MHz⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ±1 MHz, BER = 10^–3, measured at input level –70 dBm	7 / 4⁽²⁾	dB
Selectivity, ±2 MHz⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ±2 MHz, BER = 10^–3, measured at input level –70 dBm	39 / 33⁽²⁾	dB
Selectivity, ±3 MHz⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ±3 MHz, BER = 10^–3, measured at input level –70 dBm	36 / 41⁽²⁾	dB
Selectivity, ±4 MHz⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ±4 MHz, BER = 10^–3, measured at input level –70 dBm	36 / 45⁽²⁾	dB
Selectivity, ±5 MHz or more⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ≥ ±5 MHz, BER = 10^–3, measured at input level –70 dBm	40	dB
Selectivity, image frequency⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at image frequency, BER = 10^–3, measured at input level –70 dBm	33	dB
Selectivity, image frequency ±1 MHz⁽¹⁾	Note that Image frequency + 1 MHz is the Co- channel –1 MHz. Wanted signal at –67 dBm, modulated interferer at ±1 MHz from image frequency, BER = 10^–3, measured at input level –70 dBm	4 / 41⁽²⁾	dB
Out-of-band blocking⁽³⁾	30 MHz to 2000 MHz	–10	dBm
Out-of-band blocking	2003 MHz to 2399 MHz	–18	dBm
Out-of-band blocking	2484 MHz to 2997 MHz	–12	dBm
Out-of-band blocking	3000 MHz to 12.75 GHz	–2	dBm
Intermodulation	Wanted signal at 2402 MHz, –64 dBm. Two interferers at 2405 and 2408 MHz respectively, at the given power level	–42	dBm
Spurious emissions, 30 to 1000 MHz⁽⁴⁾	Measurement in a 50-Ω single-ended load.	< –59	dBm
Spurious emissions, 1 to 12.75 GHz⁽⁴⁾	Measurement in a 50 Ω single-ended load.	< –47	dBm
RSSI dynamic range		70	dB
RSSI accuracy		±4	dB
2 Mbps (LE 2M)
Receiver sensitivity	Differential mode. Measured at SMA connector, BER = 10^–3	–92	dBm
Receiver saturation	Differential mode. Measured at SMA connector, BER = 10^–3	> 5	dBm
Frequency error tolerance	Difference between the incoming carrier frequency and the internally generated carrier frequency	> (–500 / 500)	kHz
Data rate error tolerance	Difference between incoming data rate and the internally generated data rate (37-byte packets)	> (–700 / 750)	ppm
Co-channel rejection⁽¹⁾	Wanted signal at –67 dBm, modulated interferer in channel, BER = 10^–3	–7	dB
Selectivity, ±2 MHz⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ±2 MHz, Image frequency is at –2 MHz BER = 10^–3, measured at input level –70 dBm	8 / 4⁽²⁾	dB
Selectivity, ±4 MHz⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ±4 MHz, BER = 10^–3, measured at input level –70 dBm	36 / 36⁽²⁾	dB
Selectivity, ±6 MHz⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at ±6 MHz, BER = 10^–3, measured at input level –70 dBm	37 / 36⁽²⁾	dB
Selectivity, image frequency⁽¹⁾	Wanted signal at –67 dBm, modulated interferer at image frequency, BER = 10^–3, measured at input level –70 dBm	4	dB
Selectivity, image frequency ±2 MHz⁽¹⁾	Note that Image frequency + 2 MHz is the Co-channel. Wanted signal at –67 dBm, modulated interferer at ±2 MHz from image frequency, BER = 10^–3, measured at input level –70 dBm	–7 / 36⁽²⁾	dB
Out-of-band blocking⁽³⁾	30 MHz to 2000 MHz	–16	dBm
Out-of-band blocking	2003 MHz to 2399 MHz	–21	dBm
Out-of-band blocking	2484 MHz to 2997 MHz	–15	dBm
Out-of-band blocking	3000 MHz to 12.75 GHz	–12	dBm
Intermodulation	Wanted signal at 2402 MHz, –64 dBm. Two interferers at 2408 and 2414 MHz respectively, at the given power level	–38	dBm

(1) Numbers given as I/C dB

(2) X / Y, where X is +N MHz and Y is –N MHz

(3) Excluding one exception at F_wanted / 2, per Bluetooth Specification

(4) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)