ZHCSOK7C March   2020  – December 2024 CC3130

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 功能方框图
  6. 5 Device Comparison
    1. 5.1 Related Products
  7. 6 Pin Configuration and Functions
    1. 6.1 Pin Diagram
    2. 6.2 Pin Attributes
    3. 6.3 Signal Descriptions
      1.      12
    4. 6.4 Connections for Unused Pins
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Power-On Hours (POH)
    4. 7.4  Recommended Operating Conditions
    5. 7.5  Current Consumption Summary
    6. 7.6  TX Power Control
    7. 7.7  Brownout and Blackout Conditions
      1. 7.7.1 Brownout and Blackout Voltage Levels
    8. 7.8  Electrical Characteristics for DIO Pins
      1. 7.8.1 Electrical Characteristics: DIO Pins Except 52 and 53
      2. 7.8.2 Electrical Characteristics: DIO Pins 52 and 53
    9. 7.9  Electrical Characteristics for Pin Internal Pullup and Pulldown
    10. 7.10 WLAN Receiver Characteristics
      1.      28
    11. 7.11 WLAN Transmitter Characteristics
      1.      30
    12. 7.12 WLAN Transmitter Out-of-Band Emissions
      1. 7.12.1 WLAN 2.4GHz Filter Requirements
    13. 7.13 BLE/2.4GHz Radio Coexistence and WLAN Coexistence Requirements
    14. 7.14 Thermal Resistance Characteristics for RGK Package
    15. 7.15 Timing and Switching Characteristics
      1. 7.15.1 Power Supply Sequencing
      2. 7.15.2 Device Reset
      3. 7.15.3 Reset Timing
        1. 7.15.3.1 nRESET (32-kHz Crystal)
        2. 7.15.3.2 First-Time Power-Up and Reset Removal Timing Requirements (32kHz Crystal)
        3. 7.15.3.3 nRESET (External 32kHz Crystal)
          1. 7.15.3.3.1 First-Time Power-Up and Reset Removal Timing Requirements (External 32kHz Crystal)
      4. 7.15.4 Wakeup from HIBERNATE Mode
        1. 7.15.4.1 nHIB Timing Requirements
      5. 7.15.5 Clock Specifications
        1. 7.15.5.1 Slow Clock Using Internal Oscillator
          1. 7.15.5.1.1 RTC Crystal Requirements
        2. 7.15.5.2 Slow Clock Using an External Clock
          1. 7.15.5.2.1 External RTC Digital Clock Requirements
        3. 7.15.5.3 Fast Clock (Fref) Using an External Crystal
          1. 7.15.5.3.1 WLAN Fast-Clock Crystal Requirements
        4. 7.15.5.4 Fast Clock (Fref) Using an External Oscillator
          1. 7.15.5.4.1 External Fref Clock Requirements (–40°C to +85°C)
      6. 7.15.6 Interfaces
        1. 7.15.6.1 Host SPI Interface Timing
          1. 7.15.6.1.1 Host SPI Interface Timing Parameters
        2. 7.15.6.2 Flash SPI Interface Timing
          1. 7.15.6.2.1 Flash SPI Interface Timing Parameters
        3. 7.15.6.3 DIO Interface Timing
          1. 7.15.6.3.1 DIO Output Transition Time Parameters (Vsupply = 3.3V)
            1. 7.15.6.3.1.1 DIO Output Transition Times (Vsupply = 3.3V) #GUID-01C4FDBB-69B0-4F3E-AD14-CDACB1CFA3A4/SWAS03298470_
          2. 7.15.6.3.2 DIO Input Transition Time Parameters
            1. 7.15.6.3.2.1 DIO Input Transition Time Parameters
    16. 7.16 External Interfaces
      1. 7.16.1 SPI Flash Interface
      2. 7.16.2 SPI Host Interface
      3. 7.16.3 Host UART Interface
        1. 7.16.3.1 5-Wire UART Topology
        2. 7.16.3.2 4-Wire UART Topology
        3. 7.16.3.3 3-Wire UART Topology
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Device Features
      1. 8.2.1 WLAN
      2. 8.2.2 Network Stack
      3. 8.2.3 Security
      4. 8.2.4 Host Interface and Driver
      5. 8.2.5 System
    3. 8.3 Power-Management Subsystem
      1. 8.3.1 VBAT Wide-Voltage Connection
    4. 8.4 Low-Power Operating Modes
      1. 8.4.1 Low-Power Deep Sleep
      2. 8.4.2 Hibernate
      3. 8.4.3 Shutdown
    5. 8.5 Memory
      1. 8.5.1 External Memory Requirements
    6. 8.6 Restoring Factory Default Configuration
    7. 8.7 Hostless Mode
  10. 9 Applications, Implementation, and Layout
    1. 9.1 Application Information
      1. 9.1.1 BLE/2.4GHz Radio Coexistence
      2. 9.1.2 Antenna Selection
      3. 9.1.3 Typical Application
    2. 9.2 PCB Layout Guidelines
      1. 9.2.1 General PCB Guidelines
      2. 9.2.2 Power Layout and Routing
        1. 9.2.2.1 Design Considerations
      3. 9.2.3 Clock Interface Guidelines
      4. 9.2.4 Digital Input and Output Guidelines
      5. 9.2.5 RF Interface Guidelines
  11. 10Device and Documentation Support
    1. 10.1 Tools and Software
    2. 10.2 Firmware Updates
    3. 10.3 Device Nomenclature
    4. 10.4 Documentation Support
    5. 10.5 Trademarks
    6. 10.6 静电放电警告
    7. 10.7 术语表
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Package Option Addendum
      1. 12.1.1 Packaging Information
      2. 12.1.2 Tape and Reel Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.16.3.3 3-Wire UART Topology

The 3-wire UART topology requires only the following lines (see Figure 7-20):

  • RX
  • TX
  • CTS
CC3130 3-Wire UART Topology Figure 7-20 3-Wire UART Topology

Using this topology requires meeting one of the following conditions:

  • The host always stays awake or active.
  • The host goes to sleep but the UART module has receiver start-edge detection for auto-wake-up and does not lose data.
  • The host can always receive any amount of data transmitted by the SimpleLink™ device because there is no flow control in this direction.

Because there is no full flow control, the host cannot stop the SimpleLink™ device to send its data; thus, the following parameters must be carefully considered:

  • Maximum baud rate
  • RX character interrupt latency and low-level driver jitter buffer
  • Time consumed by the user's application
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |