ZHCSOK7B March   2020  – May 2021 CC3130

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 功能方框图
  5. 5 Revision History
  6. 6 Device Comparison
    1. 6.1 Related Products
  7. 7 Terminal Configuration and Functions
    1. 7.1 Pin Diagram
    2. 7.2 Pin Attributes
    3. 7.3 Signal Descriptions
      1.      12
    4. 7.4 Connections for Unused Pins
  8. 8 Specifications
    1. 8.1  Absolute Maximum Ratings
    2. 8.2  ESD Ratings
    3. 8.3  Power-On Hours (POH)
    4. 8.4  Recommended Operating Conditions
    5. 8.5  Current Consumption Summary
    6. 8.6  TX Power Control
    7. 8.7  Brownout and Blackout Conditions
      1. 8.7.1 Brownout and Blackout Voltage Levels
    8. 8.8  Electrical Characteristics for DIO Pins
      1. 8.8.1 Electrical Characteristics: DIO Pins Except 52 and 53
      2. 8.8.2 Electrical Characteristics: DIO Pins 52 and 53
    9. 8.9  Electrical Characteristics for Pin Internal Pullup and Pulldown
    10. 8.10 WLAN Receiver Characteristics
      1.      28
    11. 8.11 WLAN Transmitter Characteristics
      1.      30
    12. 8.12 WLAN Transmitter Out-of-Band Emissions
      1. 8.12.1 WLAN 2.4 GHz Filter Requirements
    13. 8.13 BLE/2.4 GHz Radio Coexistence and WLAN Coexistence Requirements
    14. 8.14 Thermal Resistance Characteristics for RGK Package
    15. 8.15 Timing and Switching Characteristics
      1. 8.15.1 Power Supply Sequencing
      2. 8.15.2 Device Reset
      3. 8.15.3 Reset Timing
        1. 8.15.3.1 nRESET (32-kHz Crystal)
        2. 8.15.3.2 First-Time Power-Up and Reset Removal Timing Requirements (32-kHz Crystal)
        3. 8.15.3.3 nRESET (External 32-kHz Crystal)
          1. 8.15.3.3.1 First-Time Power-Up and Reset Removal Timing Requirements (External 32-kHz Crystal)
      4. 8.15.4 Wakeup From HIBERNATE Mode
        1. 8.15.4.1 nHIB Timing Requirements
      5. 8.15.5 Clock Specifications
        1. 8.15.5.1 Slow Clock Using Internal Oscillator
          1. 8.15.5.1.1 RTC Crystal Requirements
        2. 8.15.5.2 Slow Clock Using an External Clock
          1. 8.15.5.2.1 External RTC Digital Clock Requirements
        3. 8.15.5.3 Fast Clock (Fref) Using an External Crystal
          1. 8.15.5.3.1 WLAN Fast-Clock Crystal Requirements
        4. 8.15.5.4 Fast Clock (Fref) Using an External Oscillator
          1. 8.15.5.4.1 External Fref Clock Requirements (–40°C to +85°C)
      6. 8.15.6 Interfaces
        1. 8.15.6.1 Host SPI Interface Timing
          1. 8.15.6.1.1 Host SPI Interface Timing Parameters
        2. 8.15.6.2 Flash SPI Interface Timing
          1. 8.15.6.2.1 Flash SPI Interface Timing Parameters
        3. 8.15.6.3 DIO Interface Timing
          1. 8.15.6.3.1 DIO Output Transition Time Parameters (Vsupply = 3.3 V)
            1. 8.15.6.3.1.1 DIO Output Transition Times (Vsupply = 3.3 V) (1)
          2. 8.15.6.3.2 DIO Input Transition Time Parameters
            1. 8.15.6.3.2.1 DIO Input Transition Time Parameters
    16. 8.16 External Interfaces
      1. 8.16.1 SPI Flash Interface
      2. 8.16.2 SPI Host Interface
      3. 8.16.3 Host UART Interface
        1. 8.16.3.1 5-Wire UART Topology
        2. 8.16.3.2 4-Wire UART Topology
        3. 8.16.3.3 3-Wire UART Topology
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Device Features
      1. 9.2.1 WLAN
      2. 9.2.2 Network Stack
      3. 9.2.3 Security
      4. 9.2.4 Host Interface and Driver
      5. 9.2.5 System
    3. 9.3 Power-Management Subsystem
      1. 9.3.1 VBAT Wide-Voltage Connection
    4. 9.4 Low-Power Operating Modes
      1. 9.4.1 Low-Power Deep Sleep
      2. 9.4.2 Hibernate
      3. 9.4.3 Shutdown
    5. 9.5 Memory
      1. 9.5.1 External Memory Requirements
    6. 9.6 Restoring Factory Default Configuration
    7. 9.7 Hostless Mode
  10. 10Applications, Implementation, and Layout
    1. 10.1 Application Information
      1. 10.1.1 BLE/2.4 GHz Radio Coexistence
      2. 10.1.2 Antenna Selection
      3. 10.1.3 Typical Application
    2. 10.2 PCB Layout Guidelines
      1. 10.2.1 General PCB Guidelines
      2. 10.2.2 Power Layout and Routing
        1. 10.2.2.1 Design Considerations
      3. 10.2.3 Clock Interface Guidelines
      4. 10.2.4 Digital Input and Output Guidelines
      5. 10.2.5 RF Interface Guidelines
  11. 11Device and Documentation Support
    1. 11.1 Tools and Software
    2. 11.2 Firmware Updates
    3. 11.3 Device Nomenclature
    4. 11.4 Documentation Support
    5. 11.5 Trademarks
    6. 11.6 Electrostatic Discharge Caution
    7. 11.7 术语表
  12. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Package Option Addendum
      1. 12.1.1 Packaging Information
      2. 12.1.2 Tape and Reel Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.7 Brownout and Blackout Conditions

The device enters a brownout condition when the input voltage drops below Vbrownout (see Figure 8-4 and Figure 8-5). This condition must be considered during design of the power supply routing, especially when operating from a battery. High-current operations, such as a TX packet or any external activity (not necessarily related directly to networking) can cause a drop in the supply voltage, potentially triggering a brownout condition. The resistance includes the internal resistance of the battery, the contact resistance of the battery holder (four contacts for 2× AA batteries), and the wiring and PCB routing resistance.

Note:

When the device is in HIBERNATE state, brownout is not detected. Only blackout is in effect during HIBERNATE state.

GUID-740E3145-E3B2-40ED-80B7-7681249CB98C-low.gifFigure 8-4 Brownout and Blackout Levels (1 of 2)

 

 

GUID-B7323AF0-50BC-4C9A-B4FF-D69EA68040BB-low.gifFigure 8-5 Brownout and Blackout Levels (2 of 2)

In the brownout condition, all sections of the device (including the 32-kHz RTC) shut down except for the Hibernate module, which remains on. The current in this state can reach approximately 400 µA. The blackout condition is equivalent to a hardware reset event in which all states within the device are lost.

Section 8.7.1 lists the brownout and blackout voltage levels.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |