米6体育平台手机版

ZHCS994B June 2012 – September 2018 CC430F5123 , CC430F5125 , CC430F5143 , CC430F5145 , CC430F5147 , CC430F6147

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

RGZ|48
- MPQF123F

散热焊盘机械数据 (封装 | 引脚)

RGZ|48
- QFND014T

订购信息

5.43.13 RF Receive, 868 MHz and 915 MHz

T_A = 25°C, V_CC = 3 V (unless otherwise noted)⁽¹⁾
1% packet error rate, 20-byte packet length, Sensitivity optimized, MDMCFG2.DEM_DCFILT_OFF = 0 (unless otherwise noted)

PARAMETER	TEST CONDITIONS		TYP	UNIT
0.6-kBaud data rate, 2-FSK, 14.3-kHz deviation, 58-kHz digital channel filter bandwidth (unless otherwise noted)
Receiver sensitivity			–115	dBm
1.2-kBaud data rate, 2-FSK, 5.2-kHz deviation, 58-kHz digital channel filter bandwidth (unless otherwise noted)
Receiver sensitivity⁽¹⁾			–109	dBm
Receiver sensitivity⁽¹⁾	2-GFSK modulation by setting MDMCFG2.MOD_FORMAT=2, Gaussian filter with BT = 0.5		–109	dBm
Saturation	FIFOTHR.CLOSE_IN_RX = 0⁽³⁾		–28	dBm
Adjacent channel rejection	Desired channel 3 dB above the sensitivity limit, 100-kHz channel spacing⁽²⁾	–100-kHz offset	39	dB
Adjacent channel rejection		+100-kHz offset	39	dB
Image channel rejection	IF 152 kHz, desired channel 3 dB above the sensitivity limit		29	dB
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁴⁾	±2-MHz offset	–48	dBm
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁴⁾	±10-MHz offset	–40	dBm
38.4-kBaud data rate, 2-FSK, 20-kHz deviation, 100-kHz digital channel filter bandwidth (unless otherwise noted)
Receiver sensitivity⁽⁵⁾			–102	dBm
Receiver sensitivity⁽⁵⁾	2-GFSK modulation by setting MDMCFG2.MOD_FORMAT = 2, Gaussian filter with BT = 0.5		–101	dBm
Saturation	FIFOTHR.CLOSE_IN_RX = 0⁽³⁾		–19	dBm
Adjacent channel rejection	Desired channel 3 dB above the sensitivity limit, 200-kHz channel spacing⁽⁴⁾	–200-kHz offset	20	dB
Adjacent channel rejection		+200-kHz offset	25	dB
Image channel rejection	IF 152 kHz, desired channel 3 dB above the sensitivity limit		23	dB
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁴⁾	±2-MHz offset	–48	dBm
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁴⁾	±10-MHz offset	–40	dBm
250-kBaud data rate, 2-FSK, 127-kHz deviation, 540-kHz digital channel filter bandwidth (unless otherwise noted)
Receiver sensitivity ⁽⁷⁾			–90	dBm
Receiver sensitivity ⁽⁷⁾	2-GFSK modulation by setting MDMCFG2.MOD_FORMAT = 2, Gaussian filter with BT = 0.5		–90	dBm
Saturation	FIFOTHR.CLOSE_IN_RX = 0⁽³⁾		–19	dBm
Adjacent channel rejection	Desired channel 3 dB above the sensitivity limit, 750-kHz channel spacing⁽⁶⁾	–750-kHz offset	24	dB
Adjacent channel rejection		+750-kHz offset	30	dB
Image channel rejection	IF 304 kHz, desired channel 3 dB above the sensitivity limit		18	dB
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁶⁾	±2-MHz offset	–53	dBm
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁶⁾	±10-MHz offset	–39	dBm
500-kBaud data rate, MSK, 812-kHz digital channel filter bandwidth (unless otherwise noted)
Receiver sensitivity⁽⁷⁾			–84	dBm
Image channel rejection	IF 355 kHz, desired channel 3 dB above the sensitivity limit		–2	dB
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁸⁾	±2-MHz offset	–53	dBm
Blocking	Desired channel 3 dB above the sensitivity limit⁽⁸⁾	±10-MHz offset	–38	dBm

(1) Sensitivity can be traded for current consumption by setting MDMCFG2.DEM_DCFILT_OFF = 1. The typical current consumption is then reduced by approximately 2 mA close to the sensitivity limit. The sensitivity is typically reduced to –107 dBm

(2) See Figure 5-23 for blocking performance at other offset frequencies.

(3) See DN010 Close-in Reception with CC1101.

(4) See Figure 5-24 for blocking performance at other offset frequencies.

(5) Sensitivity can be traded for current consumption by setting MDMCFG2.DEM_DCFILT_OFF = 1. The typical current consumption is then reduced by approximately 2 mA close to the sensitivity limit. The sensitivity is typically reduced to –100dBm.

(6) See Figure 5-25 for blocking performance at other offset frequencies.

(7) MDMCFG2.DEM_DCFILT_OFF = 1 cannot be used for data rates ≥ 250 kBaud.

(8) See Figure 5-26 for blocking performance at other offset frequencies.