米6体育平台手机版

ZHCSJS2N November 1997 – April 2024 CD54HC4051 , CD54HC4052 , CD54HC4053 , CD54HCT4051 , CD74HC4051 , CD74HC4052 , CD74HC4053 , CD74HCT4051 , CD74HCT4052 , CD74HCT4053

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

J|16

散热焊盘机械数据 (封装 | 引脚)

订购信息

5.4 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNIT
V_CC	Supply voltage range (T_A = full package temperature range)⁽²⁾	CD54 and 74HC types	2	6	V
V_CC		CD54 and 74HCT types	4.5	5.5
V_CC – V_EE	Supply voltage range (T_A = full package temperature range)	CD54 and 74HC types, CD54 and 74HCT types	2	10	V
V_EE	Supply voltage range (T_A = full package temperature range)⁽³⁾	CD54 and 74HC types, CD54 and 74HCT types	0	–6	V
V_I	DC input control voltage		0	V_CC	V
V_IS	Analog switch I/O voltage		V_EE	V_CC	V
T_A	Ambient temperature		–55	125	°C
t_r, t_f	Input rise and fall times	2V	0	1000	ns
		4.5V	0	500
		6V	0	400

(1) For maximum reliability, nominal operating conditions must be selected so that operation is always within the ranges specified in the Recommended Operating Conditions table.

(2) All voltages referenced to GND unless otherwise specified.

(3) In certain applications, the external load resistor current may include both V_CC and signal line components. To avoid drawing V_CC current when switch current flows into the transmission gate inputs, the voltage drop across the bidirectional switch must not exceed 0.6V (calculated from r_ON values shown in Electrical Characteristics HC and Electrical Characteristics HCT tables). No V_CC current will flow through R_L if the switch current flows into terminal 3 on the HC and HCT40511; terminals 3 and 13 on the HC and HCT4052; terminals 4, 14, and 15 on the HC and HCT4053.