5 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾

			MIN	MAX	UNIT
V_CCHCT	DC Supply voltage		–0.5	7	V
V_CCHC⁽¹⁾	DC Supply voltage		-0.5	10.5	V
I_IK	DC input diode current	For V_I < -0.5V or V_I > V_CC + 0.5V	–20	20	mA
I_O	DC switch current⁽²⁾	For V_I< -0.5V or V_I> VCC + 0.5V	-20	20	mA
I_OK	DC Output diode current	For V_O < -0.5V or V_O > V_CC + -0.5V	-25	25	mA
DC Output Source or Sink Current per Output Pin, I_O	For V_O > -0.5V or V_O < V_CC + -0.5V		–25	25	mA
I_CC	DC V_CC or ground current		–50	50	mA
T_JMAX	Maximum junction temperature (Plastic Package)			150	°C

(1) Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) In certain applications, the external load-resistor current may include both VCC and signal-line components. To avoid drawing VCC current when switch current flows into the transmission gate inputs, (terminals 1, 4, 8 and 11) the voltage drop across the bidirectional switch must not exceed 0.6V (calculated from RON values shown in the DC Electrical Specifications Table). No VCC current will flow through RLif the switch current flows into terminals 2, 3, 9 and 10. 2.