ZHCS385D June 2013 – February 2024 CDCE913-Q1 , CDCEL913-Q1
PRODUCTION DATA
- 1
- 1 特性
- 2 应用
- 3 说明
- 4 Device Comparison
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Register Maps
- 11器件和文档支持
- 12Revision History
- 13Mechanical, Packaging, and Orderable Information
8.5 Programming
Table 8-8 Command Code Definition
| BIT | DESCRIPTION |
|---|---|
| 7 | 0 = Block Read or Block Write operation 1 = Byte Read or Byte Write operation |
| (6:0) | Byte offset for Byte Read, Block Read, Byte Write, and Block Write operations |
Figure 8-3 Generic Programming Sequence
Figure 8-4 Byte Write Protocol
Figure 8-5 Byte Read Protocol
A. Data byte 0 bits [7:0] is
reserved for Revision Code and Vendor Identification. Also, Data byte 0 is used
for internal test purpose and must not be overwritten.
Figure 8-6 Block
Write Protocol
Figure 8-7 Block Read Protocol
Figure 8-8 Timing Diagram for I2C Serial Control Interface