SLPS224C August 2009 – November 2016 CSD16323Q3
PRODUCTION DATA.
7 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
7.1 Q3 Package Dimensions
| DIM | MILLIMETERS | INCHES | ||||
|---|---|---|---|---|---|---|
| MIN | NOM | MAX | MIN | NOM | MAX | |
| A | 0.950 | 1.000 | 1.100 | 0.037 | 0.039 | 0.043 |
| A1 | 0.000 | 0.000 | 0.050 | 0.000 | 0.000 | 0.002 |
| b | 0.280 | 0.340 | 0.400 | 0.011 | 0.013 | 0.016 |
| b1 | 0.310 NOM | 0.012 NOM | ||||
| c | 0.150 | 0.200 | 0.250 | 0.006 | 0.008 | 0.010 |
| D | 3.200 | 3.300 | 3.400 | 0.126 | 0.130 | 0.134 |
| D2 | 1.650 | 1.750 | 1.800 | 0.065 | 0.069 | 0.071 |
| d | 0.150 | 0.200 | 0.250 | 0.006 | 0.008 | 0.010 |
| d1 | 0.300 | 0.350 | 0.400 | 0.012 | 0.014 | 0.016 |
| E | 3.200 | 3.300 | 3.400 | 0.126 | 0.130 | 0.134 |
| E2 | 2.350 | 2.450 | 2.550 | 0.093 | 0.096 | 0.100 |
| e | 0.650 TYP | 0.026 TYP | ||||
| H | 0.35 | 0.450 | 0.550 | 0.014 | 0.018 | 0.022 |
| K | 0.650 TYP | 0.026 TYP | ||||
| L | 0.35 | 0.450 | 0.550 | 0.014 | 0.018 | 0.022 |
| L1 | 0 | — | 0 | 0 | — | 0 |
| θ | 0 | — | 0 | 0 | — | 0 |
7.2 Recommended PCB Pattern
For recommended circuit layout for PCB designs, see Reducing Ringing Through PCB Layout Techniques (SLPA005).
7.3 Recommended Stencil Opening
All dimensions are in mm, unless otherwise specified.
7.4 Q3 Tape and Reel Information
Notes:
- 10 sprocket hole pitch cumulative tolerance ±0.2.
- Camber not to exceed 1 mm in 100 mm, noncumulative over 250 mm.
- Material: black static dissipative polystyrene.
- All dimensions are in mm (unless otherwise specified).
- Thickness: 0.30 ±0.05 mm.
- MSL1 260°C (IR and Convection) PbF-Reflow Compatible.