SLPS259A December 2011 – September 2015 CSD16415Q5
PRODUCTION DATA.
7 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
7.1 Q5 Package Dimensions
| DIM | MILLIMETERS | INCHES | ||||
|---|---|---|---|---|---|---|
| MIN | TYP | MAX | MIN | TYP | MAX | |
| A | 0.950 | 1.050 | 0.037 | 0.039 | ||
| b | 0.360 | 0.460 | 0.014 | 0.018 | ||
| c | 0.150 | 0.250 | 0.006 | 0.010 | ||
| c1 | 0.150 | 0.250 | 0.006 | 0.010 | ||
| D1 | 4.900 | 5.100 | 0.193 | 0.201 | ||
| D2 | 4.320 | 4.520 | 0.170 | 0.178 | ||
| E | 4.900 | 5.100 | 0.193 | 0.201 | ||
| E1 | 5.900 | 6.100 | 0.232 | 0.240 | ||
| E2 | 3.920 | 4.12 | 0.154 | 0.162 | ||
| e | 1.27 | 0.050 | ||||
| K | 0.760 | 0.030 | ||||
| L | 0.510 | 0.710 | 0.020 | 0.028 | ||
| θ | 0.00 | |||||
7.2 Recommended PCB Pattern
| DIM | MILLIMETERS | INCHES | ||
|---|---|---|---|---|
| MIN | MAX | MIN | MAX | |
| F1 | 6.205 | 6.305 | 0.244 | 0.248 |
| F2 | 4.460 | 4.560 | 0.176 | 0.180 |
| F3 | 4.460 | 4.560 | 0.176 | 0.180 |
| F4 | 0.650 | 0.700 | 0.026 | 0.028 |
| F5 | 0.620 | 0.670 | 0.024 | 0.026 |
| F6 | 0.630 | 0.680 | 0.025 | 0.027 |
| F7 | 0.700 | 0.800 | 0.028 | 0.031 |
| F8 | 0.650 | 0.700 | 0.026 | 0.028 |
| F9 | 0.620 | 0.670 | 0.024 | 0.026 |
| F10 | 4.900 | 5.000 | 0.193 | 0.197 |
| F11 | 4.460 | 4.560 | 0.176 | 0.180 |
For recommended circuit layout for PCB designs, see Reducing Ringing Through PCB Layout Techniques (SLPA005).
7.3 Q5 Tape and Reel Information
Notes:
- 10 sprocket hole pitch cumulative tolerance ±0.2
- Camber not to exceed 1 mm in 100 mm, noncumulative over 250 mm
- Material: black, static-dissipative polystyrene
- All dimensions are in mm (unless otherwise specified)
- A0 and B0 measured on a plane 0.3 mm above the bottom of the pocket
- MSL1 260°C (IR and Convection) PbF Reflow Compatible