米6体育平台手机版

ZHCSDG0 March 2015 CSD17578Q5A

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

DQJ|8
- MPSS010B

散热焊盘机械数据 (封装 | 引脚)

订购信息

zhcsdg0_oa

5 Specifications

5.1 Electrical Characteristics

(T_A = 25°C unless otherwise stated)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
STATIC CHARACTERISTICS
BV_DSS	Drain-to-Source Voltage	V_GS = 0 V, I_D = 250 μA	30			V
I_DSS	Drain-to-Source Leakage Current	V_GS = 0 V, V_DS = 24 V			1	μA
I_GSS	Gate-to-Source Leakage Current	V_DS = 0 V, V_GS = 20 V			100	nA
V_GS(th)	Gate-to-Source Threshold Voltage	V_DS = V_GS, I_D = 250 μA	1.1	1.5	1.9	V
R_DS(on)	Drain-to-Source On-Resistance	V_GS = 4.5 V, I_D = 10 A		7.9	9.3	mΩ
R_DS(on)	Drain-to-Source On-Resistance	V_GS = 10 V, I_D = 10 A		5.9	6.9	mΩ
g_ƒs	Transconductance	V_DS = 3 V, I_D = 10 A		44		S
DYNAMIC CHARACTERISTICS
C_iss	Input Capacitance	V_GS = 0 V, V_DS = 15 V, ƒ = 1 MHz		1170	1510	pF
C_oss	Output Capacitance			136	177	pF
C_rss	Reverse Transfer Capacitance			58	75	pF
R_G	Series Gate Resistance			1.8	3.6	Ω
Q_g	Gate Charge Total (4.5 V)	V_DS = 15 V, I_D = 10 A		7.9	10.3	nC
Q_g	Gate Charge Total (10 V)			17.2	22.3	nC
Q_gd	Gate Charge Gate-to-Drain			2.0		nC
Q_gs	Gate Charge Gate-to-Source			3.1		nC
Q_g(th)	Gate Charge at V_th			1.7		nC
Q_oss	Output Charge	V_DS = 15 V, V_GS = 0 V		4.2		nC
t_d(on)	Turn On Delay Time	V_DS = 15 V, V_GS = 10 V, I_DS = 10 A, R_G = 0 Ω		4		ns
t_r	Rise Time			22		ns
t_d(off)	Turn Off Delay Time			17		ns
t_ƒ	Fall Time			2		ns
DIODE CHARACTERISTICS
V_SD	Diode Forward Voltage	I_SD = 10 A, V_GS = 0 V		0.8	1.0	V
Q_rr	Reverse Recovery Charge	V_DS= 15 V, I_F = 10 A, di/dt = 300 A/μs		6.5		nC
t_rr	Reverse Recovery Time	V_DS= 15 V, I_F = 10 A, di/dt = 300 A/μs		6.8		ns

5.2 Thermal Information

(T_A = 25°C unless otherwise stated)

THERMAL METRIC		MIN	TYP	MAX	UNIT
R_θJC	Junction-to-Case Thermal Resistance ⁽¹⁾			3.8	°C/W
R_θJA	Junction-to-Ambient Thermal Resistance⁽¹⁾⁽²⁾			50	°C/W

(1) R_θJC is determined with the device mounted on a 1 inch² (6.45 cm²), 2 oz. (0.071 mm thick) Cu pad on a 1.5 inch × 1.5 inch (3.81 cm × 3.81 cm), 0.06 inch (1.52 mm) thick FR4 PCB. R_θJC is specified by design, whereas R_θJA is determined by the user’s board design.

(2) Device mounted on FR4 material with 1 inch² (6.45 cm²), 2 oz. (0.071 mm thick) Cu.

Max R_θJA = 50°C/W when mounted on 1 inch² (6.45 cm²) of
2 oz. (0.071 mm thick) Cu.

Max R_θJA = 140°C/W when mounted on a minimum pad area of
2 oz. (0.071 mm thick) Cu.

5.3 Typical MOSFET Characteristics

(T_A = 25°C unless otherwise stated)

Figure 1. Transient Thermal Impedance

Figure 2. Saturation Characteristics

I_D = 10 A		V_DS = 15 V

Figure 4. Gate Charge

	I_D = 250 µA

Figure 6. Threshold Voltage vs Temperature

	I_D = 10 A

Figure 8. Normalized On-State Resistance vs Temperature

Single Pulse, Max R_θJC = 3.8°C/W

Figure 10. Maximum Safe Operating Area

Figure 12. Maximum Drain Current vs Temperature

	V_DS = 5 V

Figure 3. Transfer Characteristics

Figure 5. Capacitance

Figure 7. On-State Resistance vs Gate-to-Source Voltage

Figure 9. Typical Diode Forward Voltage

Figure 11. Single Pulse Unclamped Inductive Switching