米6体育平台手机版

ZHCS977E June 2012 – September 2014 CSD18504Q5A

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

DQJ|8
- MPSS010B

散热焊盘机械数据 (封装 | 引脚)

订购信息

5 Specifications

5.1 Electrical Characteristics

(T_A = 25°C unless otherwise stated)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
STATIC CHARACTERISTICS
BV_DSS	Drain-to-Source Voltage	V_GS = 0 V, I_D = 250 μA	40			V
I_DSS	Drain-to-Source Leakage Current	V_GS = 0 V, V_DS = 32 V			1	μA
I_GSS	Gate-to-Source Leakage Current	V_DS = 0 V, V_GS = 20 V			100	nA
V_GS(th)	Gate-to-Source Threshold Voltage	V_DS = V_GS, I_D = 250 μA	1.5	1.9	2.4	V
R_DS(on)	Drain-to-Source On-Resistance	V_GS = 4.5 V, I_D = 17 A		7.5	9.8	mΩ
R_DS(on)	Drain-to-Source On-Resistance	V_GS = 10 V, I_D = 17 A		5.3	6.6	mΩ
g_ƒs	Transconductance	V_DS = 20 V, I_D = 17 A		71		S
DYNAMIC CHARACTERISTICS
C_iss	Input Capacitance	V_GS = 0 V, V_DS = 20 V, ƒ = 1 MHz		1380	1656	pF
C_oss	Output Capacitance			310	372	pF
C_rss	Reverse Transfer Capacitance			8	9.6	pF
R_G	Series Gate Resistance			1.4	2.8	Ω
Q_g	Gate Charge Total (4.5 V)	V_DS = 20 V, I_D = 17 A		7.7	9.2	nC
Q_g	Gate Charge Total (10 V)			16	19	nC
Q_gd	Gate Charge Gate-to-Drain			2.4		nC
Q_gs	Gate Charge Gate-to-Source			3.2		nC
Q_g(th)	Gate Charge at V_th			2.2		nC
Q_oss	Output Charge	V_DS = 20 V, V_GS = 0 V		21		nC
t_d(on)	Turn On Delay Time	V_DS = 20 V, V_GS = 10 V, I_DS = 17 A, R_G = 0 Ω		3.2		ns
t_r	Rise Time			6.8		ns
t_d(off)	Turn Off Delay Time			12		ns
t_ƒ	Fall Time			2		ns
DIODE CHARACTERISTICS
V_SD	Diode Forward Voltage	I_SD = 17 A, V_GS = 0 V		0.8	1	V
Q_rr	Reverse Recovery Charge	V_DS= 20 V, I_F = 17 A, di/dt = 300 A/μs		39		nC
t_rr	Reverse Recovery Time	V_DS= 20 V, I_F = 17 A, di/dt = 300 A/μs		28		ns

5.2 Thermal Information

(T_A = 25°C unless otherwise stated)

THERMAL METRIC		MIN	TYP	MAX	UNIT
R_θJC	Junction-to-Case Thermal Resistance⁽¹⁾			2.0	°C/W
R_θJA	Junction-to-Ambient Thermal Resistance⁽¹⁾⁽²⁾			50	°C/W

(1) R_θJC is determined with the device mounted on a 1-inch² (6.45-cm²), 2-oz. (0.071-mm thick) Cu pad on a 1.5-inches × 1.5-inches
(3.81-cm × 3.81-cm), 0.06-inch (1.52-mm) thick FR4 PCB. R_θJC is specified by design, whereas R_θJA is determined by the user’s board design.

(2) Device mounted on FR4 material with 1-inch² (6.45-cm²), 2-oz. (0.071-mm thick) Cu.