ZHCSD92 January   2015 DAC39J82

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用范围
  3. 3 说明
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  DC Electrical Characteristics
    6. 6.6  Digital Electrical Characteristics
    7. 6.7  AC Electrical Characteristics
    8. 6.8  Timing Requirements
    9. 6.9  Switching Characteristics
    10. 6.10 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Serdes Input
      2. 7.3.2  Serdes Rate
      3. 7.3.3  Serdes PLL
      4. 7.3.4  Serdes Equalizer
      5. 7.3.5  JESD204B Descrambler
      6. 7.3.6  JESD204B Frame Assembly
      7. 7.3.7  Serial Peripheral Interface (SPI)
      8. 7.3.8  Multi-Device Synchronization
      9. 7.3.9  Input Multiplexer
      10. 7.3.10 FIR Filters
      11. 7.3.11 Full Complex Mixer
      12. 7.3.12 Coarse Mixer
      13. 7.3.13 Dithering
      14. 7.3.14 Quadrature Modulation Correction (QMC)
        1. 7.3.14.1 Gain and Phase Correction
        2. 7.3.14.2 Offset Correction
      15. 7.3.15 Group Delay Correction Block
        1. 7.3.15.1 Fine Fractional Delay FIR Filter
        2. 7.3.15.2 Coarse Fractional Delay FIR Filter
      16. 7.3.16 Output Multiplexer
      17. 7.3.17 Power Measurement And Power Amplifier Protection
      18. 7.3.18 Serdes Test Modes
      19. 7.3.19 Error Counter
      20. 7.3.20 Eye Scan
      21. 7.3.21 JESD204B Pattern Test
      22. 7.3.22 Temperature Sensor
      23. 7.3.23 Alarm Monitoring
      24. 7.3.24 LVPECL Inputs
      25. 7.3.25 CMOS Digital Inputs
      26. 7.3.26 Reference Operation
      27. 7.3.27 Analog Outputs
      28. 7.3.28 DAC Transfer Function
    4. 7.4 Device Functional Modes
      1. 7.4.1 Clocking Modes
        1. 7.4.1.1 PLL Bypass Mode
        2. 7.4.1.2 PLL Mode
      2. 7.4.2 PRBS Test Mode
    5. 7.5 Register Map
      1. 7.5.1 Register Descriptions
        1. 7.5.1.1   config0 Register - Address: 0x00, Default: 0x0218
        2. 7.5.1.2   config1 Register - Address: 0x01, Default: 0x0003
        3. 7.5.1.3   config2 Register - Address: 0x02, Default: 0x2002
        4. 7.5.1.4   config3 Register - Address: 0x03, Default: 0xF380
        5. 7.5.1.5   config4 Register - Address: 0x04, Default: 0x00FF
        6. 7.5.1.6   config5 Register - Address: 0x05, Default: 0xFFFF
        7. 7.5.1.7   config6 Register - Address: 0x06, Default: 0xFFFF
        8. 7.5.1.8   config7 Register - Address: 0x07, Default: 0x0000
        9. 7.5.1.9   config8 Register - Address: 0x08, Default: 0x0000
        10. 7.5.1.10  config9 Register - Address: 0x09, Default: 0x0000
        11. 7.5.1.11  config10 Register - Address: 0x0A, Default: 0x0000
        12. 7.5.1.12  config11 Register - Address: 0x0B, Default: 0x0000
        13. 7.5.1.13  config12 Register - Address: 0xC, Default: 0x0400
        14. 7.5.1.14  config13 Register - Address: 0xD, Default: 0x0400
        15. 7.5.1.15  config14 Register - Address: 0x0E, Default: 0x0400
        16. 7.5.1.16  config15 Register - Address: 0x0F, Default: 0x0400
        17. 7.5.1.17  config16 Register - Address: 0x10, Default: 0x0000
        18. 7.5.1.18  config17 Register - Address: 0x11, Default: 0x0000
        19. 7.5.1.19  config18 Register - Address: 0x12, Default: 0x0000
        20. 7.5.1.20  config19 Register - Address: 0x13, Default: 0x0000
        21. 7.5.1.21  config20 Register - Address: 0x14, Default: 0x0000
        22. 7.5.1.22  config21 Register - Address: 0x15, Default: 0x0000
        23. 7.5.1.23  config22 Register - Address: 0x16, Default: 0x0000
        24. 7.5.1.24  config23 Register - Address: 0x17, Default: 0x0000
        25. 7.5.1.25  config24 Register - Address: 0x18, Default: 0x0000
        26. 7.5.1.26  config25 Register - Address: 0x19, Default: 0x0000
        27. 7.5.1.27  config26 Register - Address: 0x1A, Default: 0x0020
        28. 7.5.1.28  config27 Register - Address: 0x1B, Default: 0x0000
        29. 7.5.1.29  config28 Register - Address: 0x1C, Default: 0x0000
        30. 7.5.1.30  config29 Register - Address: 0x1D, Default: 0x0000
        31. 7.5.1.31  config30 Register - Address: 0x1E, Default: 0x1111
        32. 7.5.1.32  config31 Register - Address: 0x1F, Default: 0x1111
        33. 7.5.1.33  config32 Register - Address: 0x20, Default: 0x0000
        34. 7.5.1.34  config33 Register - Address: 0x21, Default: 0x0000
        35. 7.5.1.35  config34 Register - Address: 0x22, Default: 0x1B1B
        36. 7.5.1.36  config35 Register - Address: 0x23, Default: 0xFFFF
        37. 7.5.1.37  config36 Register - Address: 0x24, Default: 0x0000
        38. 7.5.1.38  config37 Register - Address: 0x25, Default: 0x8000
        39. 7.5.1.39  config38 Register - Address: 0x26, Default: 0x0000
        40. 7.5.1.40  config39 Register - Address: 0x27, Default: 0x0000
        41. 7.5.1.41  config40 Register - Address: 0x28, Default: 0x0000
        42. 7.5.1.42  config41 Register - Address: 0x29, Default: 0x0000
        43. 7.5.1.43  config42 Register - Address: 0x2A, Default: 0x0000
        44. 7.5.1.44  config43 Register - Address: 0x2B, Default: 0x0000
        45. 7.5.1.45  config44 Register - Address: 0x2C, Default: 0x0000
        46. 7.5.1.46  config45 Register - Address: 0x2D, Default: 0x0000
        47. 7.5.1.47  config46 Register - Address: 0x2E, Default: 0xFFFF
        48. 7.5.1.48  config47 Register - Address: 0x2F, Default: 0x0004
        49. 7.5.1.49  config48 Register - Address: 0x30, Default: 0x0000
        50. 7.5.1.50  config49 Register - Address: 0x31, Default: 0x0000
        51. 7.5.1.51  config50 Register - Address: 0x32, Default: 0x0000
        52. 7.5.1.52  config51 Register - Address: 0x33, Default: 0x0100
        53. 7.5.1.53  config52 Register - Address: 0x34, Default: 0x0000
        54. 7.5.1.54  config53 Register - Address: 0x35, Default: 0x0000
        55. 7.5.1.55  config54 Register - Address: 0x36, Default: 0x0000
        56. 7.5.1.56  config55 Register - Address: 0x37, Default: 0x0000
        57. 7.5.1.57  config56 Register - Address: 0x38, Default: 0x0000
        58. 7.5.1.58  config57 Register - Address: 0x39, Default: 0x0000
        59. 7.5.1.59  config58 Register - Address: 0x3A, Default: 0x0000
        60. 7.5.1.60  config59 Register - Address: 0x3B, Default: 0x0000
        61. 7.5.1.61  config60 Register - Address: 0x3C, Default: 0x0000
        62. 7.5.1.62  config61 Register - Address: 0x3D, Default: 0x0000
        63. 7.5.1.63  config62 Register - Address: 0x3E, Default: 0x0000
        64. 7.5.1.64  config63 Register - Address: 0x3F, Default: 0x0000
        65. 7.5.1.65  config64 Register - Address: 0x40, Default: 0x0000
        66. 7.5.1.66  config65 Register - Address: 0x41, Default: 0x0000
        67. 7.5.1.67  config66 Register - Address: 0x42, Default: 0x0000
        68. 7.5.1.68  config67 Register - Address: 0x43, Default: 0x0000
        69. 7.5.1.69  config68 Register - Address: 0x44, Default: 0x0000
        70. 7.5.1.70  config69 Register - Address: 0x45, Default: 0x0000
        71. 7.5.1.71  config70 Register - Address: 0x46, Default: 0x0120
        72. 7.5.1.72  config71 Register - Address: 0x47, Default: 0x3450
        73. 7.5.1.73  config72 Register - Address: 0x48, Default: 0x31C3
        74. 7.5.1.74  config73 Register - Address: 0x49, Default: 0x0000
        75. 7.5.1.75  config74 Register - Address: 0x4A, Default: 0x001E
        76. 7.5.1.76  config75 Register - Address: 0x4B, Default: 0x0000
        77. 7.5.1.77  config76 Register - Address: 0x4C, Default: 0x0000
        78. 7.5.1.78  config77 Register - Address: 0x4D, Default: 0x0300
        79. 7.5.1.79  config78 Register - Address: 0x4E, Default: 0x0F0F
        80. 7.5.1.80  config79 Register - Address: 0x4F, Default: 0x1CC1
        81. 7.5.1.81  config80 Register - Address: 0x50, Default: 0x0000
        82. 7.5.1.82  config81 Register - Address: 0x51, Default: 0x00FF
        83. 7.5.1.83  config82 Register - Address: 0x52, Default: 0x00FF
        84. 7.5.1.84  config83 Register - Address: 0x53, Default: 0x0000
        85. 7.5.1.85  config84 Register - Address: 0x54, Default: 0x00FF
        86. 7.5.1.86  config85 Register - Address: 0x55, Default: 0x00FF
        87. 7.5.1.87  config86 Register - Address: 0x56, Default: 0x0000
        88. 7.5.1.88  config87 Register - Address: 0x57, Default: 0x00FF
        89. 7.5.1.89  config88 Register - Address: 0x58, Default: 0x00FF
        90. 7.5.1.90  config89 Register - Address: 0x59, Default: 0x0000
        91. 7.5.1.91  config90 Register - Address: 0x5A, Default: 0x00FF
        92. 7.5.1.92  config91 Register - Address: 0x5B, Default: 0x00FF
        93. 7.5.1.93  config92 Register - Address: 0x5C, Default: 0x1111
        94. 7.5.1.94  config93 Register - Address: 0x5D, Default: 0x0000
        95. 7.5.1.95  config94 Register - Address: 0x5E, Default: 0x0000
        96. 7.5.1.96  config95 Register - Address: 0x5F, Default: 0x0123
        97. 7.5.1.97  config96 Register - Address: 0x60, Default: 0x4567
        98. 7.5.1.98  config97 Register - Address: 0x61, Default: 0x000F
        99. 7.5.1.99  config98 Register - Address: 0x62, Default: 0x0000
        100. 7.5.1.100 config99 Register - Address: 0x63, Default: 0x0000
        101. 7.5.1.101 config100 Register - Address: 0x64, Default: 0x0000
        102. 7.5.1.102 config101 Register - Address: 0x65, Default: 0x0000
        103. 7.5.1.103 config102 Register - Address: 0x66, Default: 0x0000
        104. 7.5.1.104 config103 Register - Address: 0x67, Default: 0x0000
        105. 7.5.1.105 config104 Register - Address: 0x68, Default: 0x0000
        106. 7.5.1.106 config105 Register - Address: 0x69, Default: 0x0000
        107. 7.5.1.107 config106 Register - Address: 0x6A, Default: 0x0000
        108. 7.5.1.108 config107 Register - Address: 0x6B, Default: 0x0000
        109. 7.5.1.109 config108 Register - Address: 0x6C, Default: 0x0000
        110. 7.5.1.110 config109 Register - Address: 0x6D, Default: 0x00xx
        111. 7.5.1.111 config110 Register - Address: 0x6E, Default: 0x0000
        112. 7.5.1.112 config111 Register - Address: 0x6F, Default: 0x0000
        113. 7.5.1.113 config112 Register - Address: 0x70, Default: 0x0000
        114. 7.5.1.114 config113 Register - Address: 0x71, Default: 0x0000
        115. 7.5.1.115 config114 Register - Address: 0x72, Default: 0x0000
        116. 7.5.1.116 config115 Registe - Address: 0x73, Default: 0x0000
        117. 7.5.1.117 config116 Register - Address: 0x74, Default: 0x0000
        118. 7.5.1.118 config117 Register - Address: 0x75, Default: 0x0000
        119. 7.5.1.119 config118 Register - Address: 0x76, Default: 0x0000
        120. 7.5.1.120 config119 Register - Address: 0x77, Default: 0x0000
        121. 7.5.1.121 config120 Register - Address: 0x78, Default: 0x0000
        122. 7.5.1.122 config121 Register - Address: 0x79, Default: 0x0000
        123. 7.5.1.123 config122 Register - Address: 0x7A, Default: 0x0000
        124. 7.5.1.124 config123 Register - Address: 0x7B, Default: 0x0000
        125. 7.5.1.125 config124 Register - Address: 0x7C, Default: 0x0000
        126. 7.5.1.126 config125 Register - Address: 0x7D, Default: 0x0000
        127. 7.5.1.127 config126 Register - Address: 0x7E, Default: 0x0000
        128. 7.5.1.128 config127 Register - Address: 0x7F, Default: 0x0009
  8. 8 Applications and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Low-IF Wideband LTE Transmitter
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
          1. 8.2.1.2.1 Data Input Rate
          2. 8.2.1.2.2 Intermediate Frequency
          3. 8.2.1.2.3 Interpolation
          4. 8.2.1.2.4 DAC PLL Setup
          5. 8.2.1.2.5 Serdes Lanes
        3. 8.2.1.3 Application Performance Plots
      2. 8.2.2 Zero-IF Wideband Transmitter
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Detailed Design Procedure
          1. 8.2.2.2.1 Data Input Rate
          2. 8.2.2.2.2 Interpolation
          3. 8.2.2.2.3 Serdes Lanes
          4. 8.2.2.2.4 LO Feedthrough and Sideband Correction
        3. 8.2.2.3 Application Performance Plots
    3. 8.3 Initialization Set Up
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Examples
  11. 11器件和文档支持
    1. 11.1 商标
    2. 11.2 静电放电警告
    3. 11.3 术语表
  12. 12机械封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
Supply voltage(2) VDDDAC09, VDDDIG09 –0.3 1.3 V
VDDCLK09 –0.3 1.3 V
VDDT09 –0.3 1.3 V
VDDR18, VDDIO18, VDDS18, VQPS18 –0.3 2.45 V
VDDAPLL18, VDDAREF18 –0.3 2.45 V
VDDADAC33 –0.3 4.0 V
Pin voltage(2) RX[7..0]P/N –0.5 V VDDT09 + 0.5 V V
SDENB, SCLK, SDIO, SDO, TXENA, ALARM, RESETB, SLEEP, TMS, TCLK, TDI, TDO, TRSTB, TESTMODE, SYNC_N_AB, SYNC_N_CD –0.5 V VDDIO18 + 0.5 V V
DACCLKP/N, SYSREFP/N –0.5 V VDDAPLL18 + 0.5 V V
SYNCBP/N –0.5 V VDDS18 + 0.5 V V
LPF –0.5 V VDDAPLL18 + 0.5 V V
IOUTAP/N, IOUTBP/N, IOUTCP/N, IOUTDP/N –0.5 V 1.0 V V
RBIAS, EXTIO, ATEST –0.5 V VDDAREF18 + 0.5 V V
IFORCE, VSENSE –0.5 V VDDDIG09 + 0.5 V V
AMUX1, AMUX0 –0.5 V VDDT09 + 0.5 V V
Peak input current (any input) 20 mA
Peak total input current (all inputs) –30 mA
Absolute maximum junction temperature TJ 150 °C
Operating free-air temperature range, TA: DAC39J82 –40 85 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Measured with respect to GND.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) 1000 V
Charged device model (CDM), per JEDEC specification JESD22-C101(2) 250
(1) Level listed above is the passing level per ANSI, ESDA, and JEDEC JS-001. JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) Level listed above is the passing level per EIA-JEDEC JESD22-C101. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

MIN NOM MAX UNIT
TJ Recommended operating junction temperature 105 °C
Maximum rated operating junction temperature(1) 125 °C
TA Recommended free-air temperature -40 25 85 °C
(1) Prolonged use at this junction temperature may increase the device failure-in-time (FIT) rate.

6.4 Thermal Information

THERMAL CONDUCTIVITY(1) DAC39J82 UNIT
AAV (144 PINS)
RθJA Theta junction-to-ambient (still air) 31.4 °C/W
RθJB Theta junction-to-board 12.6
RθJC Theta junction-to-case, top 1.8
ψJT Psi junction-to-top of package 0.2
ψJB Psi junction-to-bottom of package 12
(1) Air flow or heat sinking reduces θJA and may be required for sustained operation at 85° and maximum operating conditions.

6.5 DC Electrical Characteristics

Typical values at TA = 25°C, full temperature range is TMIN = -40°C to TMAX = 85°C, nominal supplies, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Resolution 16 Bits
DC ACCURACY
DNL Differential nonlinearity 1 LSB = IOUTFS/216 ±4 LSB
INL Integral nonlinearity ±6 LSB
ANALOG OUTPUT
Coarse gain linearity ±0.04 LSB
Offset error Mid code offset ±0.001 %FSR
Gain error With external reference ±2 %FSR
With internal reference ±2
Gain mismatch With internal reference ±2 %FSR
Full scale output current 20 30 mA
Output compliance range –0.5 0.6 V
Output resistance 300 kΩ
Output capacitance 5 pF
REFERENCE OUTPUT
VREF Reference output voltage 0.9 V
Reference output current(1) 100 nA
REFERENCE INPUT
VEXTIO Input voltage range External reference mode 0.1 0.9 1 V
Input resistance 1 MΩ
Input capacitance 50 pF
POWER SUPPLY
VDDADAC33 3.15 3.3 3.45 V
VDDAPLL18, VDDAREF18, VDDS18, VQPS18, VDDR18 1.71 1.8 1.89 V
VDDIO18 1.71 1.8 1.89 V
VDDDIG09, VDDDAC09, VDDCLK09, VDDT09 fDAC≤2.5GSPS 0.85 0.9 1.05 V
fDAC>2.5GSPS 0.9 1.0 1.05
PSRR Power Supply Rejection Ratio DC tested ±0.2 %FSR/V
POWER CONSUMPTION
I(VDDADAC33) Analog supply current MODE 1:
fDAC=2.8GSPS, 4x interpolation,
NCO on, QMC on, inverse sinc on,
GDC off, PAP off, PLL off, LMF=421,
SerDes rate = 7GSPS, 20mA FS output,
IF=150MHz.		 64 80 mA
I(VDDDIG09) Digital supply current 591 850
I(VDDDAC09) DAC supply current 17 30
I(VDDCLK09) Clock supply current 107 140
I(VDDT09) SerDes core supply current 129 200
I(VDDR18) SerDes analog supply current 12 28
I(VDD18) Other 1.8V supply current 32 60
P Power dissipation 1135 1370(2) mW
I(VDDADAC33) Analog supply current MODE 2:
fDAC=2.5GSPS, 2x interpolation,
NCO on, QMC on, invsinc on,
GDC off, PAP off, PLL on, LMF=421,
SerDes rate = 12.5GSPS,
20mA FS output, IF=150MHz. 		64 mA
I(VDDDIG09) Digital supply current 628
I(VDDDAC09) DAC supply current 13
I(VDDCLK09) Clock supply current 86
I(VDDT09) SerDes core supply current 168
I(VDDR18) SerDes analog supply current 18
I(VDD18) Other 1.8V supply current 53
P Power dissipation 1144 mW
I(VDDADAC33) Analog supply current MODE 3:
fDAC=1.47456GSPS, 2x interpolation,
NCO on, QMC off, invsinc off, GDC off,
PAP off, PLL off, LMF=421,
SerDes rate = 7.3728GSPS,
20mA FS output, IF=150MHz.		 64 mA
I(VDDDIG09) Digital supply current 363
I(VDDDAC09) DAC supply current 10
I(VDDCLK09) Clock supply current 50
I(VDDT09) SerDes core supply current 135
I(VDDR18) SerDes analog supply current 12
I(VDD18) Other 1.8V supply current 30
P Power dissipation 789 mW
I(VDDADAC33) Analog supply current MODE 4:
fDAC=1.47456GSPS, 4x interpolation,
NCO on, QMC off, invsinc off,
GDC off, PAP off, PLL off,
LMF=222,
SerDes rate = 7.3728GSPS,
20mA FS output, IF=150MHz.		 64 mA
I(VDDDIG09) Digital supply current 312
I(VDDDAC09) DAC supply current 10
I(VDDCLK09) Clock supply current 50
I(VDDT09) SerDes core supply current 76
I(VDDR18) SerDes analog supply current 12
I(VDD18) Other 1.8V supply current 30
P Power dissipation 690 mW
I(VDDADAC33) Analog supply current MODE 5:
fDAC=1.47456GSPS, x4,
NCO off, QMC off, invsinc off,
GDC off, PAP off,
PLL off, LMF=222,
SerDes rate = 7.3728GSPS,
DAC output in sleep mode.		 13 mA
I(VDDDIG09) Digital supply current 263
I(VDDDAC09) DAC supply current 8
I(VDDCLK09) Clock supply current 50
I(VDDT09) SerDes core supply current 76
I(VDDR18) SerDes analog supply current 12
I(VDD18) Other 1.8V supply current 26
P Power dissipation 469 mW
I(VDDADAC33) Analog supply current MODE 6:
fDAC=1000MSPS, 2x interpolation,
NCO off, QMC off, invsinc off,
GDC off, PAP off, PLL on,
LMF=222, SerDes rate = 10GSPS,
20mA FS output, IF=150MHz. 		64 mA
I(VDDDIG09) Digital supply current 257
I(VDDDAC09) DAC supply current 8
I(VDDCLK09) Clock supply current 36
I(VDDT09) SerDes core supply current 85
I(VDDR18) SerDes analog supply current 15
I(VDD18) Other 1.8V supply current 50
P Power dissipation 676 mW
I(VDDADAC33) Analog supply current MODE 7:
fDAC=1000MSPS, 2x interpolation,
NCO off, QMC off invsinc off,
GDC off,
PAP off, PLL off, LMF=222,
SerDes rate = 10GSPS,
20mA FS output, IF=150MHz. 		64 mA
I(VDDDIG09) Digital supply current 256
I(VDDDAC09) DAC supply current 8
I(VDDCLK09) Clock supply current 35
I(VDDT09) SerDes core supply current 85
I(VDDR18) SerDes analog supply current 15
I(VDD18) Other 1.8V supply current 29
P Power dissipation 636 mW
I(VDDADAC33) Analog supply current MODE 8:
fDAC=625MSPS, 2x interpolation,
NCO off, QMC off, invsinc off,
GDC off,
PAP off, PLL off, LMF=421,
SerDes rate = 3.125GSPS,
20mA FS output, IF=20MHz. 		64 mA
I(VDDDIG09) Digital supply current 195
I(VDDDAC09) DAC supply current 4
I(VDDCLK09) Clock supply current 22
I(VDDT09) SerDes core supply current 119
I(VDDR18) SerDes analog supply current 11
I(VDD18) Other 1.8V supply current 25
P Power dissipation 582 mW
I(VDDADAC33) Analog supply current MODE 9:
fDAC=1.23GSPS, no interpolation,
NCO off, QMC off, invsinc off, GDC off,
PAP off, PLL off, LMF=421,
SerDes rate = 12.3GSPS,
20mA FS output, IF=150MHz; 		64 mA
I(VDDDIG09) Digital supply current 311
I(VDDDAC09) DAC supply current 10
I(VDDCLK09) Clock supply current 42
I(VDDT09) SerDes core supply current 165
I(VDDR18) SerDes analog supply current 18
I(VDD18) Other 1.8V supply current 29
P Power dissipation 771 mW
I(VDDADAC33) Analog supply current MODE 10:
Power down mode, no clock,
DAC in sleep mode,
SerDes in sleep mode 		5 mA
I(VDDDIG09) Digital supply current 76
I(VDDDAC09) DAC supply current 1
I(VDDCLK09) Clock supply current 1
I(VDDT09) SerDes core supply current 9
I(VDDR18) SerDes analog supply current 0
I(VDD18) Other 1.8V supply current 10
P Power dissipation 112 mW
I(VDDADAC33) Analog supply current MODE 11:
fDAC=2.8GSPS, 2x interpolation,
NCO on, QMC on, inverse sinc on,
GDC off, PAP off, PLL off, LMF=821,
SerDes rate = 7GSPS, 20mA FS output,
IF=150MHz		 64 mA
I(VDDDIG09) Digital supply current 702
I(VDDDAC09) DAC supply current 17
I(VDDCLK09) Clock supply current 107
I(VDDT09) SerDes core supply current 254
I(VDDR18) SerDes analog supply current 24
I(VDD18) Other 1.8V supply current 32
P Power dissipation 1392 mW
(1) Use an external buffer amplifier with high impedance input to drive any external load.
(2) The MAX power limit is set separately which is NOT equal to the power consumption when all of the power supplies are at the MAX current.

6.6 Digital Electrical Characteristics

Typical values at TA = 25°C, full temperature range is TMIN = –40°C to TMAX = 85°C, nominal supplies, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
CML SERDES INPUTS: RX[7:0]P/N
VDIFF Receiver Input Amplitude 50 1200 mV
VCOM Input Common Mode (TERM=111) 600 mV
Input Common Mode (TERM=001) 700
Input Common Mode (TERM=100) 0
Input Common Mode (TERM=101) 250
ZDIFF Internal differential termination 85 100 115 Ω
fDATA Serdes bit rate 0.78125 12.5 Gbps
LVPECL INPUTS: SYSREFP/N
VCOM Input common mode voltage 0.5 V
VIDPP Differential input peak-to-peak voltage 400 800 mV
ZT Internal termination 100 Ω
CL Input capacitance 2 pF
LVPECL INPUTS: DACCLKP/N
VCOM Input common mode voltage 0.5 V
VIDPP Differential input peak-to-peak voltage 400 800 mV
ZT Internal termination 100 Ω
CL Input capacitance 2 pF
Duty cycle 40% 60%
fDACCLK DACCLKP/N Input Frequency 2.5 GHz
LVDS OUTPUTS: SYNCBP/N
VCOM Output common mode voltage 1.2 V
ZT Internal termination 100 Ω
VOD Differential output voltage swing 0.5 V
CMOS INTERFACE: SDENB, SCLK, SDIO, SDO, TXENA, ALARM, RESETB, SLEEP, TMS, TCLK, TDI, TDO, TRSTB, TESTMODE, SYNC_N_AB, SYNC_N_CD
VIH High-level input voltage 0.7 x VDDIO V
VIL Low-level input voltage 0.3 x VDDIO V
IIH High-level input current -40 40 µA
IIL Low-level input current -40 40 µA
CI CMOS Input capacitance 2 pF
VOH ALARM, SDO, SDIO, TDO Iload =–100 μA VDDIO – 0.2 V
Iload = –2 mA 0.8 x VDDIO
VOL ALARM, SDO, SDIO, TDO Iload = 100 μA 0.2 V
Iload = 2 mA 0.5
PHASE LOCKED LOOP(1)
PLL/VCO Operating Frequency H-Band, pll_vcosel = '0', pll_vcoitune = '11', pll_vco = '001010'(10) 4559.9 4563.0 4566.2 MHz
pll_vco = '001011'(11) 4572.7 4575.9 4579.2
pll_vco = '001100'(12) 4585.7 4589.0 4592.3
pll_vco = '001101'(13) 4599 4602.3 4608
pll_vco = '001110'(14) 4612.5 4615.9 4619.3
pll_vco = '001111'(15) 4626.2 4629.7 4633.1
pll_vco = '010000'(16) 4640.1 4643.6 4647.2
pll_vco = '010001'(17) 4654.3 4657.8 4661.4
pll_vco = '010010'(18) 4668.6 4672.3 4675.9
pll_vco = '010011'(19) 4683.2 4686.9 4690.6
pll_vco = '010100'(20) 4698 4701.8 4705.5
pll_vco = '010101'(21) 4713.1 4716.9 4720.7
pll_vco = '010110'(22) 4728.3 4732.2 4736
pll_vco = '010111'(23) 4743.8 4747.7 4751.6
pll_vco = '011000'(24) 4759.5 4763.4 4767.4
pll_vco = '011001'(25) 4775.4 4779.4 4783.4
pll_vco = '011010'(26) 4791.5 4795.6 4800
pll_vco = '011011'(27) 4807.9 4812.0 4816.1
pll_vco = '011100'(28) 4824.4 4828.6 4832.8
pll_vco = '011101'(29) 4841.2 4945.4 4849.7
pll_vco = '011110'(30) 4858.2 4862.5 4866.8
pll_vco = '011111'(31) 4875.4 4879.8 4884.1
PLL/VCO Operating Frequency H-Band, pll_vcosel = '0', pll_vcoitune = '11', pll_vco = '100000'(32) 4892.9 4897.3 4901.7 MHz
pll_vco = '100001'(33) 4910.6 4915.0 4919.5
pll_vco = '100010'(34) 4928.4 4933.0 4937.5
pll_vco = '100011'(35) 4946.6 4951.1 4955.7
pll_vco = '100100'(36) 4964.9 4969.5 4974.1
pll_vco = '100101'(37) 4983.4 4988.1 4992.8
pll_vco = '100110'(38) 5000 5006.9 5011.7
pll_vco = '100111'(39) 5021.2 5026.0 5030.8
pll_vco = '101000'(40) 5040.4 5045.2 5050.1
pll_vco = '101001'(41) 5059.8 5064.7 5069.6
pll_vco = '101010'(42) 5079.5 5084.4 5089.4
pll_vco = '101011'(43) 5099.3 5104.3 5109.3
pll_vco = '101100'(44) 5119.4 5124.5 5129.5
pll_vco = '101101'(45) 5139.7 5144.8 5150
pll_vco = '101110'(46) 5160.3 5165.4 5170.6
pll_vco = '101111'(47) 5180 5186.2 5191.5
pll_vco = '110000'(48) 5202 5207.2 5212.5
pll_vco = '110001'(49) 5223.2 5228.5 5233.8
pll_vco = '110010'(50) 5244.6 5250.0 5255.3
pll_vco = '110011'(51) 5266.2 5271.6 5277.1
pll_vco = '110100'(52) 5288 5293.5 5299
pll_vco = '110101'(53) 5310.1 5315.7 5321.2
pll_vco = '110110'(54) 5332.4 5338.0 5343.6
pll_vco = '110111'(55) 5354.9 5360.6 5366.2
pll_vco = '111000'(56) 5377.6 5383.3 5389.1
pll_vco = '111001'(57) 5400.6 5406.3 5412.1
PLL/VCO Operating Frequency L-Band, pll_vcosel = '1', pll_vcoitune = '10', pll_vco = '001010'(10) 3847.1 3849.8 3852.4 MHz
pll_vco = '001011'(11) 3857.8 3860.5 3863.2
pll_vco = '001100'(12) 3868.7 3871.4 3874.1
pll_vco = '001101'(13) 3879.7 3882.5 3885.3
pll_vco = '001110'(14) 3890.9 3893.7 3896.6
pll_vco = '001111'(15) 3902.3 3905.2 3908
pll_vco = '010000'(16) 3913.8 3916.8 3919.7
pll_vco = '010001'(17) 3925.6 3928.6 3932.16
pll_vco = '010010'(18) 3937.5 3940.5 3943.5
pll_vco = '010011'(19) 3949.6 3952.7 3955.7
pll_vco = '010100'(20) 3961.9 3965.0 3968.1
pll_vco = '010101'(21) 3974.7 3977.5 3980.7
pll_vco = '010110'(22) 3987 3990.2 3993.4
pll_vco = '010111'(23) 3999.8 4003.1 4006.3
pll_vco = '011000'(24) 4012.8 4016.1 4019.4
pll_vco = '011001'(25) 4026 4029.3 4032.7
pll_vco = '011010'(26) 4039.4 4042.8 4046.1
pll_vco = '011011'(27) 4052.9 4056.3 4059.8
pll_vco = '011100'(28) 4066.6 4070.1 4073.6
pll_vco = '011101'(29) 4080.5 4084.0 4087.6
pll_vco = '011110'(30) 4094.6 4098.2 4101.7
pll_vco = '011111'(31) 4108.9 4112.5 4120
PLL/VCO Operating Frequency L-Band, pll_vcosel = '1', pll_vcoitune = '10', pll_vco = '100000'(32) 4123.3 4127.0 4130.6 MHz
pll_vco = '100001'(33) 4137.9 4141.6 4145.3
pll_vco = '100010'(34) 4152.7 4156.5 4160.2
pll_vco = '100011'(35) 4167.7 4171.5 4175.3
pll_vco = '100100'(36) 4182.9 4186.7 4190.5
pll_vco = '100101'(37) 4198.2 4202.1 4205.9
pll_vco = '100110'(38) 4213.7 4217.6 4221.5
pll_vco = '100111'(39) 4229.4 4233.4 4237.3
pll_vco = '101000'(40) 4245.3 4249.3 4253.3
pll_vco = '101001'(41) 4261.3 4265.4 4269.4
pll_vco = '101010'(42) 4277.6 4281.6 4285.7
pll_vco = '101011'(43) 4294 4298.1 4302.2
pll_vco = '101100'(44) 4310.6 4314.7 4318.9
pll_vco = '101101'(45) 4327.3 4331.6 4335.8
pll_vco = '101110'(46) 4344.3 4348.5 4352.8
pll_vco = '101111'(47) 4361.4 4365.7 4370
pll_vco = '110000'(48) 4378.7 4383.1 4387.4
pll_vco = '110001'(49) 4396.2 4400.6 4405
pll_vco = '110010'(50) 4413.9 4418.3 4423.68
pll_vco = '110011'(51) 4431.7 4436.2 4440.7
pll_vco = '110100'(52) 4449.7 4454.3 4458.8
pll_vco = '110101'(53) 4468 4472.5 4477.1
pll_vco = '110110'(54) 4486.3 4491.0 4495.6
pll_vco = '110111'(55) 4504.9 4509.6 4514.2
pll_vco = '111000'(56) 4523.6 4528.4 4533.1
pll_vco = '111001'(57) 4542.6 4547.3 4552.1
(1) PLL range not covered in the table can be achieved with the following recommended pll_vco adjustment: if die temperature >55 C°, increase the pll_vco setting by 1; if the die temperature < 15 C°, decrease the pll_vco setting by 1.

6.7 AC Electrical Characteristics

Typical values at TA = 25°C, full temperature range is TMIN = –40°C to TMAX = 85°C, nominal supplies, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
ANALOG OUTPUT (1)
fDAC Maximum DAC rate 2x or higher interpolation, PLL Off 2800 MSPS
2x interpolation 2x or higher interpolation, PLL On 2706
1x interpolation 1400
AC PERFORMANCE (2)
SFDR Spurious Free Dynamic
(0 to fDAC/2)		 fDAC = 2.8 GSPS, fOUT = 150 MHz, 0 dBFS 68 dBc
fDAC = 2.8 GSPS, fOUT = 300 MHz, 0 dBFS 66
fDAC = 2.8 GSPS, fOUT = 150 MHz, -12 dBFS 67
fDAC = 2.8 GSPS, fOUT = 300 MHz, -12 dBFS 63
fDAC = 2.5 GSPS, fOUT = 20 MHz, 0 dBFS 79
fDAC = 2.5 GSPS, fOUT = 70 MHz, 0dBFS 78
fDAC = 2.5 GSPS, fOUT = 150 MHz, 0 dBFS 72
fDAC = 2.5 GSPS, fOUT = 230 MHz, 0dBFS 67
fDAC = 2.5 GSPS, fOUT = 20 MHz, -12 dBFS 79
fDAC = 2.5 GSPS, fOUT = 70 MHz, –12dBFS 75
fDAC = 2.5 GSPS, fOUT = 150 MHz, -12 dBFS 70
fDAC = 2.5 GSPS, fOUT = 230 MHz, –12dBFS 65
fDAC = 1.6 GSPS, fOUT = 20 MHz, 0 dBFS 81
fDAC = 1.6 GSPS, fOUT = 70 MHz, 0 dBFS 77
fDAC = 1.6 GSPS, fOUT = 150 MHz, 0 dBFS 72
fDAC = 1.6 GSPS, fOUT = 230 MHz, 0 dBFS 68
fDAC = 1.6 GSPS, fOUT = 20 MHz, -12 dBFS 76
fDAC = 1.6 GSPS, fOUT = 70 MHz, –12 dBFS 72
fDAC = 1.6 GSPS, fOUT = 150 MHz, -12 dBFS 67
fDAC = 1.6 GSPS, fOUT = 230 MHz, –12 dBFS 64
IMD3 Third-order two-tone
intermodulation distortion
Each tone at –6dBFS		 fDAC = 2.8 GSPS, fOUT = 150 ± 0.5 MHz 76 dBc
fDAC = 2.8 GSPS, fOUT = 300 ± 0.5 MHz 68
fDAC = 2.5 GSPS, fOUT = 70 ± 0.5 MHz 83
fDAC = 2.5 GSPS, fOUT = 150 ± 0.5 MHz 75
fDAC = 2.5 GSPS, fOUT = 230 ± 0.5 MHz 70
fDAC = 2.0 GSPS, fOUT = 70 ± 0.5 MHz 86
fDAC = 2.0 GSPS, fOUT = 150 ± 0.5 MHz 78
fDAC = 2.0 GSPS, fOUT = 230 ± 0.5 MHz 73
fDAC = 1.6 GSPS, fOUT = 70 ± 0.5 MHz 83
fDAC = 1.6 GSPS, fOUT = 150 ± 0.5 MHz 73
fDAC = 1.6 GSPS, fOUT = 230 ± 0.5 MHz 66
NSD Noise Spectral Density(2)
fDAC = 2.5 GSPS, fOUT = 70 MHz -161 dBFS/Hz
fDAC = 2.5 GSPS, fOUT = 150 MHz –159
fDAC = 2.5 GSPS, fOUT = 230 MHz -157
fDAC = 2.0 GSPS, fOUT = 70 MHz -161
fDAC = 2.0 GSPS, fOUT = 150 MHz -160
fDAC = 2.0 GSPS, fOUT = 230 MHz -158
fDAC = 1.6 GSPS, fOUT = 70 MHz -161
fDAC = 1.6 GSPS, fOUT = 150 MHz -159
fDAC = 1.6 GSPS, fOUT = 230 MHz -157
ACLR(3) Adjacent channel leakage ratio, single carrier fDAC = 2.4576 GSPS, fOUT = 70 MHz 82 dBc
fDAC = 2.4576 GSPS, fOUT = 150 MHz 80
fDAC = 2.4576 GSPS, fOUT = 230 MHz 78
fDAC = 1.96608 GSPS, fOUT = 70 MHz 82
fDAC = 1.96608 GSPS, fOUT = 150 MHz 80
fDAC = 1.96608 GSPS, fOUT = 230 MHz 77
fDAC = 1.47456 GSPS, fOUT = 70 MHz 82
fDAC = 1.47456 GSPS, fOUT = 150 MHz 80
fDAC = 1.47456 GSPS, fOUT = 230 MHz 76
Channel Isolation fDAC = 2.5 GSPS, fOUT = 20 MHz 93 dBc
fDAC = 1.6 GSPS, fOUT = 20 MHz 93
(1) Measured single ended into 50 Ω load.
(2) 2:1 transformer output termination, 50 Ω doubly terminated load.
(3) Single carrier, W-CDMA with 3.84 MHz BW, 5-MHz spacing, centered at IF. TESTMODEL 1, 10 ms

6.8 Timing Requirements

Typical values at TA = 25°C, full temperature range is TMIN = –40°C to TMAX = 85°C, nominal supplies, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
DIGITAL INPUT TIMING SPECIFICATIONS
TIMING SYSREF INPUT: DACCLKP/N RISING EDGE LATCHING
ts(SYSREF) Setup time, SYSREFP/N valid to rising edge of DACCLKP/N 50 ps
th(SYSREF) Hold time, SYSREF/N valid after rising edge of DACCLKP/N 50 ps
TIMING SERIAL PORT
ts(SDENB) Setup time, SDENB to rising edge of SCLK 20 ns
ts(SDIO) Setup time, SDIO valid to rising edge of SCLK 10 ns
th(SDIO) Hold time, SDIO valid to rising edge of SCLK 5 ns
t(SCLK) Period of SCLK Register config7 read
(temperature sensor read)		 1 µs
All other registers 100 ns
td(Data) Data output delay after falling edge of SCLK 10 ns
tRESET Minimum RESETB pulsewidth 25 ns
ANALOG OUTPUT (1)
ts(DAC) Output settling time to 0.1% Transition: Code 0x0000 to 0xFFFF 10 ns
Power-up Time DAC Wake-up Time IOUT current settling to 1% of IOUTFS from deep sleep 90 µs
DAC Sleep Time IOUT current settling to less than 1% of IOUTFS in deep sleep 90
DELAY/LATENCY
RX SerDes analog delay 250 ps
RX SerDes digital delay full rate, RATE = "00" 34 UI
half rate, RATE = "01" 29
quarter rate, RATE = "10" 26.5
eighth rate, RATE = "11" 25.25
SerDes output to JESD204B elastic buffer input latency 12-13 JESD clock cycles
SYSREF pin to LMFC reset latency LMF = 124, 2x interpolation 10 JESD clock cycles
LMF = 124, 4x interpolation 8
LMF = 124, 8x interpolation 7
LMF = 124, 16x interpolation 5
LMF = 222, 1x interpolation 10
LMF = 222, 2x interpolation 8
LMF = 222, 4x interpolation 6
LMF = 222, 8x and 16x interpolation 5
LMF = 421, 1x interpolation 8
LMF = 421, 2x interpolation 6
LMF = 421, 4x, 8x and 16x interpolation 5
LMF = 821, 1x interpolation 6
LMF = 821, 2x, 4x and 8x interpolation 5
Digital Latency
 1x interpolation, NCO off, QMC off, Inverse sinc off(2) 162 DAC clock cycles
2x Interpolation, NCO off, QMC off, Inverse sinc off(2) 245
4x Interpolation, NCO off, QMC off, Inverse sinc off(2) 401
8x Interpolation, NCO off, QMC off, Inverse sinc off(2) 740
16x Interpolation, NCO off, QMC off, Inverse sinc off(2) 1423
NCO 48
QMC 32
Inverse Sinc 36
PA Protection (pap_dlylen_sel = "0") 68
Dithering 0
Complex Summation 0
Coarse Fractional Delay 51
Fine Fractional Delay 52
(1) Measured single ended into 50 Ω load.
(2) Measured latency from JESD buffer release to DAC output, LMF=222.

6.9 Switching Characteristics

Typical values at TA = 25°C, full temperature range is TMIN = –40°C to TMAX = 85°C, nominal supplies, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
ANALOG OUTPUT (1)
tpd Output propagation delay DAC outputs are updated on the falling edge of DAC clock. Does not include Digital Latency 2 ns
tr(IOUT) Output rise time 10% to 90% 50 ps
tf(IOUT) Output fall time 90% to 10% 50 ps

6.10 Typical Characteristics

Unless otherwise noted, all plots are at TA = 25°C, VDDDAC09, VDDCLK09, VDDDIG09 and VDDT09 are 0.9 V, other supplies are at nominal supply voltages, fDAC = 2800 MSPS, 2x interpolation, 0dBFS digital input, 20-mA full scale output current with 2:1 transformer, LMF = 821 and PLL is disabled.
D001_SLASE17.gifFigure 1. Integral Nonlinearity
D003_SLASE48.gifFigure 3. SFDR vs Output Frequency Over Input Scale
D005_SLASE48.gifFigure 5. Third Harmonic Distortion vs Output Frequency Over Input Scale
D007_SLASE48.gif
Figure 7. SFDR vs Output Frequency Over fDAC
D009_SLASE17.gif
fref = fDAC/4, M = 32, N = 8, Prescaler = 2 for PLL On
Figure 9. SFDR vs Output Frequency Over Clocking Options
D011_SLASE48.gif
IF = 150 MHz
Figure 11. Single Tone Spectral Plot
D013_SLASE48.gif
Figure 13. IMD3 vs Output Frequency Over Input Scale
D015_SLASE48.gif
Figure 15. IMD3 vs Output Frequency Over fDAC
D017_SLASE17.gif
fref = fDAC/4, M = 32, N = 8, Prescaler = 2 for PLL On
Figure 17. IMD3 vs Output Frequency Over Clocking Options
D019_SLASE48.gif
IF = 150 MHz, Tone Spacing = 1 MHz
Figure 19. Two-Tone Spectral Plot
D021_SLASE48.gif
Figure 21. NSD vs Output Frequency Over Input Scale
D023_SLASE48.gif
Figure 23. NSD vs Output Frequency Over fDAC
D025_SLASE17.gif
fref = fDAC/4, M = 32, N = 8, Prescaler = 2 for PLL On
Figure 25. NSD vs Output Frequency Over Clocking Options
D027_SLASE48.gif
Single Carrier WCDMA
Figure 27. ACLR (Alternate Channel) vs Output Frequency Over fDAC
D029_SLASE17.gif
Single Carrier WCDMA; fref = fDAC/4, M = 32, N = 8, Prescaler = 2 for PLL On
Figure 29. ACLR (Alternate Channel) vs Output Frequency Over Clocking Options
D031_SLASE47.gif
Figure 31. VDDDAC09 Current vs fDAC
D033_SLASE47.gif
QMC On, CMIX On, NCO On
Figure 33. VDDDIG09 Current vs fDAC
D035_SLASE47.gif
Figure 35. VDDR18 Current vs fDAC
D037_SLASE47.gif
Figure 37. 1.8-V Supply Current Excluding VDDR18 vs fDAC
D039_SLASE47.gif
QMC Off, CMIX Off, NCO Off, LMF = 421 for 8x interpolation; LMF = 222 for 16x interpolation
Figure 39. VDDDIG09 Current vs fDAC Over Interpolation
D041_SLASE47.gif
QMC On, CMIX On, NCO On; LMF = 421 for 8x interpolation; LMF = 222 for 16x interpolation
Figure 41. VDDDIG09 Current vs fDAC Over Interpolation
1C_WCDMA70.gif
IF = 70MHz, fDAC=2457.6MSPS
Figure 43. Single Carrier W-CDMA Test Mode 1
1C_WDMA230.gif
IF = 230MHz, fDAC=2457.6MSPS
Figure 45. Single Carrier W-CDMA Test Mode 1
4C_WCDMA_150.gif
IF = 150MHz, fDAC=2457.6MSPS
Figure 47. Four Carrier W-CDMA Test Mode 1
LTE70.gif
IF = 70MHz, fDAC=2457.6MSPS
Figure 49. 10-MHz Single Carrier LTE Test Mode 3.1
LTE230.gif
IF = 230MHz, fDAC=2457.6MSPS
Figure 51. 10-MHz Single Carrier LTE Test Mode 3.1
LTE20_150.gif
IF = 150MHz, fDAC=2457.6MSPS
Figure 53. 20-MHz Single Carrier LTE Test Mode 3.1
D002_SLASE17.gifFigure 2. Differential Nonlinearity
D004_SLASE48.gifFigure 4. Second Harmonic Distortion vs Output Frequency Over Input Scale
D006_SLASE17.gifFigure 6. SFDR vs Output Frequency Over Interpolation
D008_SLASE48.gif
Figure 8. SFDR vs Output Frequency Over IoutFS
D010_SLASE48.gif
IF = 70 MHz
Figure 10. Single Tone Spectral Plot
D012_SLASE48.gif
IF = 230 MHz
Figure 12. Single Tone Spectral Plot
D014_SLASE17.gif
Figure 14. IMD3 vs Output Frequency Over Interpolation
D016_SLASE48.gif
Figure 16. IMD3 vs Output Frequency Over Output Current IoutFS
D018_SLASE48.gif
IF = 70 MHz, Tone Spacing = 1 MHz
Figure 18. Two-Tone Spectral Plot
D020_SLASE48.gif
IF = 230 MHz, Tone Spacing = 1 MHz
Figure 20. Two-Tone Spectral Plot
D022_SLASE17.gif
Figure 22. NSD vs Output Frequency Over Interpolation
D024_SLASE48.gif
Figure 24. NSD vs Output Frequency Over Output Current IoutFS
D026_SLASE48.gif
Single Carrier WCDMA
Figure 26. ACLR (Adjacent Channel) vs Output Frequency Over fDAC
D028_SLASE17.gif
Single Carrier WCDMA; fref = fDAC/4, M = 32, N = 8, Prescaler = 2 for PLL On
Figure 28. ACLR (Adjacent Channel) vs Output Frequency Over Clocking Options
D030_SLASE48.gif
Between Channel AB pair and CD pair
Figure 30. Channel Isolation
D032_SLASE47.gif
Figure 32. VDDCLK09 Current vs fDAC
D034_SLASE47.gif
VDDT09 = 0.9 V
Figure 34. VDDT09 Current vs fDAC
D036_SLASE47.gif
Figure 36. VDDADAC33 Current vs fDAC
D038_SLASE47.gif
Figure 38. VDDDIG09 Current vs fDAC Over Digital Processing Functions
D040_SLASE47.gif
QMC Off, CMIX Off, NCO Off; LMF = 421 for 8x interpolation; LMF = 222 for 16x interpolation
Figure 40. Power Consumption vs fDAC Over Interpolation
D042_SLASE47.gif
QMC On, CMIX On, NCO On, LMF = 421 for 8x interpolation; LMF = 222 for 16x interpolation
Figure 42. Power Consumption vs fDAC Over Interpolation
1C_WCDMA150.gif
IF = 150MHz, fDAC=2457.6MSPS
Figure 44. Single Carrier W-CDMA Test Mode 1
4C_WCDMA70.gif
IF = 70MHz, fDAC=2457.6MSPS
Figure 46. Four Carrier W-CDMA Test Mode 1
4C_WCDMA230.gif
IF = 230MHz, fDAC=2457.6MSPS
Figure 48. Four Carrier W-CDMA Test Mode 1
LTE150.gif
IF = 150MHz, fDAC=2457.6MSPS
Figure 50. 10-MHz Single Carrier LTE Test Mode 3.1
LTE20_70.gif
IF = 70MHz, fDAC=2457.6MSPS
Figure 52. 20-MHz Single Carrier LTE Test Mode 3.1
LTE20_230.gif
IF = 230MHz, fDAC=2457.6MSPS
Figure 54. 20-MHz Single Carrier LTE Test Mode 3.1
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |