米6体育平台手机版

ZHCSJL8A April 2019 – September 2019 DLP3034-Q1

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

FYJ|149
- MCPS004A

散热焊盘机械数据 (封装 | 引脚)

订购信息

zhcsjl8a_oa

7.5 Micromirror Array Temperature Calculation

Active array temperature can be computed analytically from measurement points on the outside of the package, the package thermal resistance, the electrical power, and the illumination heat load.

Relationship between array temperature and the reference ceramic temperature (thermocouple location TP1 in Figure 17) is provided by the following equations.

Equation 1. T_ARRAY = T_CERAMIC + (Q_ARRAY × R_{ARRAY-TO-CERAMIC})

Equation 2. Q_ARRAY = Q_ELECTRICAL+ ( Q_INCIDENT × DMD Absorption Constant)

where

T_ARRAY = computed DMD array temperature (°C)
T_CERAMIC = measured ceramic temperature (TP1 location in Figure 17) (°C)
R_{ARRAY-TO-CERAMIC} = DMD package thermal resistance from array to TP1 (°C/watt) (see Thermal Information)
Q_ARRAY = total power, electrical plus absorbed, on the DMD array (watts)
Q_ELECTRICAL = nominal electrical power dissipation by the DMD (watts)
Q_INCIDENT = incident optical power to DMD (watts)
DMD Absorption Constant = 0.42

Electrical power dissipation of the DMD is variable and depends on the voltages, data rates and operating frequencies.

Absorbed power from the illumination source is variable and depends on the operating state of the mirrors and the intensity of the light source.

Equations shown previous are valid for a 1-chip DMD system with illumination distribution of 83.7% on the active array and 16.3% on the array border.

Sample calculation:

Q_ELECTRICAL = 0.105 W
T_CERAMIC = 55°C
Q_INCIDENT = 3 W

Equation 3. Q_ARRAY = 0.105 W + (3 W × 0.42) = 1.37 W

Equation 4. T_ARRAY = 55°C + (1.37 W × 2.5°C/W) = 58.4°C

Figure 17. Thermocouple Locations