ZHCSNH4B august 2020 – july 2023 DLP471TP
PRODUCTION DATA
TI recommends a target impedance for the PCB of 50 Ω ±10% for all signals. The exceptions are listed in Table 10-1.
| Signal Type | Signal Name | Impedance (ohms) |
|---|---|---|
| DMD High Speed Data Signals | DMD_HSSI0_N_(0…7), DMD_HSSI0_P_(0…7), DMD_HSSI1_N_(0…7), DMD_HSSI1_P_(0…7), DMD_HSSI0_CLK_N, DMD_HSSI0_CLK_P, DMD_HSSI1_CLK_N, DMD_HSSI1_CLK_P | 100-Ω differential (50-Ω single ended) |
| DMD Low Speed Interface Signals | DMD_LS0_WDATA_N, DMD_LS0_WDATA_P, DMD_LS0_CLK_N, DMD_LS0_CLK_P | 100-Ω differential (50-Ω single ended) |