ZHCSD21 October   2014 DLP6500FLQ

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  Handling Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics
    6. 6.6  Timing Requirements
    7. 6.7  Typical Characteristics
    8. 6.8  System Mounting Interface Loads
    9. 6.9  Micromirror Array Physical Characteristics
    10. 6.10 Micromirror Array Optical Characteristics
    11. 6.11 Window Characteristics
    12. 6.12 Chipset Component Usage Specification
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
    4. 7.4 Device Functional Modes
    5. 7.5 Window Characteristics and Optics
      1. 7.5.1 Optical Interface and System Image Quality
      2. 7.5.2 Numerical Aperture and Stray Light Control
      3. 7.5.3 Pupil Match
      4. 7.5.4 Illumination Overfill
    6. 7.6 Micromirror Array Temperature Calculation
    7. 7.7 Micromirror Landed-on/Landed-Off Duty Cycle
      1. 7.7.1 Definition of Micromirror Landed-On/Landed-Off Duty Cycle
      2. 7.7.2 Landed Duty Cycle and Useful Life of the DMD
      3. 7.7.3 Landed Duty Cycle and Operational DMD Temperature
      4. 7.7.4 Estimating the Long-Term Average Landed Duty Cycle of a Product or Application
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
  9. 9 Power Supply Recommendations
    1. 9.1 DMD Power Supply Requirements
    2. 9.2 DMD Power Supply Power-Up Procedure
    3. 9.3 DMD Power Supply Power-Down Procedure
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 General PCB Recommendations
    2. 10.2 Layout Example
      1. 10.2.1 Board Stack and Impedance Requirements
        1. 10.2.1.1 Power Planes
        2. 10.2.1.2 LVDS Signals
        3. 10.2.1.3 Critical Signals
        4. 10.2.1.4 Flex Connector Plating
        5. 10.2.1.5 Device Placement
        6. 10.2.1.6 Device Orientation
        7. 10.2.1.7 Fiducials
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 器件命名规则
      2. 11.1.2 器件标记
    2. 11.2 文档支持
      1. 11.2.1 相关文档　
    3. 11.3 商标
    4. 11.4 静电放电警告
    5. 11.5 术语表
  12. 12机械封装和可订购信息

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • FLQ|203
散热焊盘机械数据 (封装 | 引脚)
订购信息

5 Pin Configuration and Functions

Package Connector Terminals
(Bottom View) for FLQ (203)
pin_functions.gif

Pin Functions

PIN(1) TYPE
(I/O/P)		 SIGNAL DATA
RATE(2)		 INTERNAL
TERM(3)		 DESCRIPTION TRACE
(mils)(4)
NAME NO.
DATA BUS A
D_AN(0) B10 Input LVDS DDR Differential Data, Negative 557.27
D_AN(1) A13 Input LVDS DDR Differential Data, Negative 558.46
D_AN(2) D16 Input LVDS DDR Differential Data, Negative 556.87
D_AN(3) C17 Input LVDS DDR Differential Data, Negative 555.6
D_AN(4) B18 Input LVDS DDR Differential Data, Negative 555.33
D_AN(5) A17 Input LVDS DDR Differential Data, Negative 555.76
D_AN(6) A25 Input LVDS DDR Differential Data, Negative 556.47
D_AN(7) D22 Input LVDS DDR Differential Data, Negative 555.79
D_AN(8) C29 Input LVDS DDR Differential Data, Negative 556.54
D_AN(9) D28 Input LVDS DDR Differential Data, Negative 555.23
D_AN(10) E27 Input LVDS DDR Differential Data, Negative 555.55
D_AN(11) F26 Input LVDS DDR Differential Data, Negative 556.48
D_AN(12) G29 Input LVDS DDR Differential Data, Negative 555.91
D_AN(13) H28 Input LVDS DDR Differential Data, Negative 556.38
D_AN(14) J27 Input LVDS DDR Differential Data, Negative 559.01
D_AN(15) K26 Input LVDS DDR Differential Data, Negative 556.11
D_AP(0) B12 Input LVDS DDR Differential Data, Positive 555.99
D_AP(1) A11 Input LVDS DDR Differential Data, Positive 556.02
D_AP(2) D14 Input LVDS DDR Differential Data, Positive 556.31
D_AP(3) C15 Input LVDS DDR Differential Data, Positive 555.88
D_AP(4) B16 Input LVDS DDR Differential Data, Positive 556.08
D_AP(5) A19 Input LVDS DDR Differential Data, Positive 556.33
D_AP(6) A23 Input LVDS DDR Differential Data, Positive 556.13
D_AP(7) D20 Input LVDS DDR Differential Data, Positive 555.21
D_AP(8) A29 Input LVDS DDR Differential Data, Positive 555.58
D_AP(9) B28 Input LVDS DDR Differential Data, Positive 555.39
D_AP(10) C27 Input LVDS DDR Differential Data, Positive 556.11
D_AP(11) D26 Input LVDS DDR Differential Data, Positive 555.88
D_AP(12) F30 Input LVDS DDR Differential Data, Positive 556.58
D_AP(13) H30 Input LVDS DDR Differential Data, Positive 556.3
D_AP(14) J29 Input LVDS DDR Differential Data, Positive 557.67
D_AP(15) K28 Input LVDS DDR Differential Data, Positive 555.32
DATA BUS B
D_BN(0) AB10 Input LVDS DDR Differential Data, Negative 552.46
D_BN(1) AC13 Input LVDS DDR Differential Data, Negative 556.99
D_BN(2) Y16 Input LVDS DDR Differential Data, Negative 545.06
D_BN(3) AA17 Input LVDS DDR Differential Data, Negative 555.44
D_BN(4) AB18 Input LVDS DDR Differential Data, Negative 556.34
D_BN(5) AC17 Input LVDS DDR Differential Data, Negative 547.1
D_BN(6) AC25 Input LVDS DDR Differential Data, Negative 557.92
D_BN(7) Y22 Input LVDS DDR Differential Data, Negative 544.03
D_BN(8) AA29 Input LVDS DDR Differential Data, Negative 555.9
D_BN(9) Y28 Input LVDS DDR Differential Data, Negative 555.42
D_BN(10) W27 Input LVDS DDR Differential Data, Negative 556.26
D_BN(11) V26 Input LVDS DDR Differential Data, Negative 555.52
D_BN(12) T30 Input LVDS DDR Differential Data, Negative 556
D_BN(13) R29 Input LVDS DDR Differential Data, Negative 557.17
D_BN(14) R27 Input LVDS DDR Differential Data, Negative 555.25
D_BN(15) N27 Input LVDS DDR Differential Data, Negative 555.19
D_BP(0) AB12 Input LVDS DDR Differential Data, Positive 551.93
D_BP(1) AC11 Input LVDS DDR Differential Data, Positive 557.1
D_BP(2) Y14 Input LVDS DDR Differential Data, Positive 544.38
D_BP(3) AA15 Input LVDS DDR Differential Data, Positive 555.98
D_BP(4) AB16 Input LVDS DDR Differential Data, Positive 555.56
D_BP(5) AC19 Input LVDS DDR Differential Data, Positive 547.17
D_BP(6) AC23 Input LVDS DDR Differential Data, Positive 556.47
D_BP(7) Y20 Input LVDS DDR Differential Data, Positive 543.25
D_BP(8) AC29 Input LVDS DDR Differential Data, Positive 555.71
D_BP(9) AB28 Input LVDS DDR Differential Data, Positive 556.32
D_BP(10) AA27 Input LVDS DDR Differential Data, Positive 555.35
D_BP(11) Y26 Input LVDS DDR Differential Data, Positive 555.65
D_BP(12) U29 Input LVDS DDR Differential Data, Positive 555.28
D_BP(13) T28 Input LVDS DDR Differential Data, Positive 557.25
D_BP(14) P28 Input LVDS DDR Differential Data, Positive 555.83
D_BP(15) P26 Input LVDS DDR Differential Data, Positive 556.67
SERIAL CONTROL
SCTRL_AN C21 Input LVDS DDR Differential Serial Control, Negative 555.14
SCTRL_BN AA21 Input LVDS DDR Differential Serial Control, Negative 555.14
SCTRL_AP C23 Input LVDS DDR Differential Serial Control, Positive 555.13
SCTRL_BP AA23 Input LVDS DDR Differential Serial Control, Positive 555.13
CLOCKS
DCLK_AN B22 Input LVDS Differential Clock Negative 555.12
DCLK_BN AB22 Input LVDS Differential Clock Negative 555.12
DCLK_AP B24 Input LVDS Differential Clock Positive 555.13
DCLK_BP AB24 Input LVDS Differential Clock Positive 555.12
SERIAL COMMUNICATIONS PORT (SCP)
SCP_DO B2 Output LVCMOS SDR Serial Communications Port Output 525.78
SCP_DI F4 Input LVCMOS SDR Pull-Down Serial Communications Port Data Input 509.96
SCP_CLK E3 Input LVCMOS Pull-Down Serial Communications Port Clock 403.93
SCP_ENZ D4 Input LVCMOS Pull-Down Active-low Serial Communications Port Enable 464.17
MICROMIRROR RESET CONTROL
RESET_ADDR(0) C5 Input LVCMOS Pull-Down Reset Driver Address Select 1088.3
RESET_ADDR(1) E5 Input LVCMOS Pull-Down Reset Driver Address Select 979.26
RESET_ADDR(2) G5 Input LVCMOS Pull-Down Reset Driver Address Select 900.45
RESET_ADDR(3) AC3 Input LVCMOS Pull-Down Reset Driver Address Select 658.56
RESET_MODE(0) D8 Input LVCMOS Pull-Down Reset Driver Mode Select 1012.52
RESET_MODE(1) C11 Input LVCMOS Pull-Down Reset Driver Mode Select 789.83
RESET_SEL(0) T4 Input LVCMOS Pull-Down Reset Driver Level Select 539.64
RESET_SEL(1) U5 Input LVCMOS Pull-Down Reset Driver Level Select 400.3
RESET_STROBE V2 Input LVCMOS Pull-Down Reset Address, Mode, & Level latched on rising-edge 446.34
ENABLES & INTERRUPTS
PWRDNZ C3 Input LVCMOS Pull-Down Active-low Device Reset 390.76
RESET_OEZ W1 Input LVCMOS Pull-Down Active-low output enable for DMD reset driver circuits 513.87
RESETZ G3 Input LVCMOS Pull-Down Active-low sets Reset circuits in known VOFFSET state 941.63
RESET_IRQZ T6 Output LVCMOS Active-low, output interrupt to ASIC 403.34
VOLTAGE REGULATOR MONITORING
PG_BIAS AA11 Input LVCMOS Pull-Up Active-low fault from external VBIAS regulator 858.86
PG_OFFSET Y10 Input LVCMOS Pull-Up Active-low fault from external VOFFSET regulator 822.06
PG_RESET V4 Input LVCMOS Pull-Up Active-low fault from external VRESET regulator 1186.98
EN_BIAS D12 Output LVCMOS Active-high enable for external VBIAS regulator 167.53
EN_OFFSET AB8 Output LVCMOS Active-high enable for external VOFFSET regulator 961.04
EN_RESET H2 Output LVCMOS Active-high enable for external VRESET regulator 566.05
LEAVE PIN UNCONNECTED
MBRST(0) P2 Output Analog Pull-Down For proper DMD operation, do not connect 1167.69
MBRST(1) AB4 Output Analog Pull-Down For proper DMD operation, do not connect 1348.04
MBRST(2) AA7 Output Analog Pull-Down For proper DMD operation, do not connect 1240.35
MBRST(3) N3 Output Analog Pull-Down For proper DMD operation, do not connect 1030.51
MBRST(4) M4 Output Analog Pull-Down For proper DMD operation, do not connect 870.63
MBRST(5) AB6 Output Analog Pull-Down For proper DMD operation, do not connect 1267.73
MBRST(6) AA5 Output Analog Pull-Down For proper DMD operation, do not connect 1391.22
MBRST(7) L3 Output Analog Pull-Down For proper DMD operation, do not connect 1064.01
MBRST(8) Y6 Output Analog Pull-Down For proper DMD operation, do not connect 552.89
MBRST(9) K4 Output Analog Pull-Down For proper DMD operation, do not connect 992.63
MBRST(10) L5 Output Analog Pull-Down For proper DMD operation, do not connect 1063.13
MBRST(11) AC5 Output Analog Pull-Down For proper DMD operation, do not connect 641.44
MBRST(12) Y8 Output Analog Pull-Down For proper DMD operation, do not connect 428.07
MBRST(13) J5 Output Analog Pull-Down For proper DMD operation, do not connect 962.91
MBRST(14) K6 Output Analog Pull-Down For proper DMD operation, do not connect 1093.63
MBRST(15) AC7 Output Analog Pull-Down For proper DMD operation, do not connect 577.13
LEAVE PIN UNCONNECTED
RESERVED_PFE AA1 Input LVCMOS Pull-Down For proper DMD operation, do not connect 1293.6
RESERVED_TM B6 Input LVCMOS Pull-Down For proper DMD operation, do not connect 365.64
RESERVED_XI1 D2 Input LVCMOS Pull-Down For proper DMD operation, do not connect 689.96
RESERVED_TP0 Y2 Input Analog For proper DMD operation, do not connect 667.66
RESERVED_TP1 P6 Input Analog For proper DMD operation, do not connect 623.99
RESERVED_TP2 W3 Input Analog For proper DMD operation, do not connect 564.35
LEAVE PIN UNCONNECTED
RESERVED_BA U3 Output LVCMOS For proper DMD operation, do not connect 684.44
RESERVED_BB C9 Output LVCMOS For proper DMD operation, do not connect 223.73
RESERVED_TS D10 Output LVCMOS For proper DMD operation, do not connect 90.87
LEAVE PIN UNCONNECTED
NO CONNECT H6 For proper DMD operation, do not connect
(1) The following power supplies are required to operate the DMD: VCC, VCCI, VOFFSET, VBIAS, and VRESET. VSS must also be connected.
(2) DDR = Double Data Rate.
SDR = Single Data Rate.
Refer to the Timing Requirements for specifications and relationships.
(3) Internal term = CMOS level internal termination.
Refer to Recommended Operating Conditions for differential termination specification.
(4) Dielectric Constant for the DMD Type A ceramic package is approximately 9.6.
For the package trace lengths shown:
Propagation Speed = 11.8 / sqrt(9.6) = 3.808 in/ns.
Propagation Delay = 0.262 ns/in = 262 ps/in = 10.315 ps/mm.
PIN TYPE (I/O/P) SIGNAL DESCRIPTION
NAME(1) NO. NO. NO.
VBIAS N5 P4 R3 Power Analog Supply voltage for positive Bias level of Micromirror reset signal.
VBIAS R5 Power Analog Supply voltage for positive Bias level of Micromirror reset signal.
VOFFSET G1 J1 L1 Power Analog Supply voltage for HVCMOS logic.
Supply voltage for stepped high voltage at Micromirror address electrodes.
Supply voltage positive Offset level of Micromirror reset signal.
VOFFSET N1 R1 Power Analog
VRESET A3 A5 B4 Power Analog Power supply for negative reset level of mirror reset signal
VRESET C7 Power Analog Power supply for negative reset level of mirror reset signal
VCC A7 A15 C1 Power Analog Supply voltage for LVCMOS core logic.
VCC E1 U1 AB2 Power Analog Supply voltage for normal high level at Micromirror address electrodes.
VCC AC9 AC15 Power Analog Supply voltage for positive Offset level of Micromirror reset signal during Power Down sequence.
VCCI A21 A27 D30 Power Analog Power supply for LVDS Interface
VCCI M30 Y30 AC21 Power Analog Power supply for LVDS Interface
VCCI AC27 Power Analog Power supply for LVDS Interface
VSS A1 A9 B8 Power Analog Device Ground. Common return for all power.
VSS B14 B20 B26 Power Analog Device Ground. Common return for all power.
VSS B30 C13 C19 Power Analog Device Ground. Common return for all power.
VSS C25 D6 D18 Power Analog Device Ground. Common return for all power.
VSS D24 E29 F2 Power Analog Device Ground. Common return for all power.
VSS F28 G27 H4 Power Analog Device Ground. Common return for all power.
VSS H26 J3 J25 Power Analog Device Ground. Common return for all power.
VSS K2 K30 L25 Power Analog Device Ground. Common return for all power.
VSS L27 L29 M2 Power Analog Device Ground. Common return for all power.
VSS M6 M26 M28 Power Analog Device Ground. Common return for all power.
VSS N25 N29 P30 Power Analog Device Ground. Common return for all power.
VSS R25 T2 T26 Power Analog Device Ground. Common return for all power.
VSS U27 V28 V30 Power Analog Device Ground. Common return for all power.
VSS W5 W29 Y4 Power Analog Device Ground. Common return for all power.
VSS Y12 Y18 Y24 Power Analog Device Ground. Common return for all power.
VSS AA3 AA9 AA13 Power Analog Device Ground. Common return for all power.
VSS AA19 AA25 AB14 Power Analog Device Ground. Common return for all power.
VSS AB20 AB26 AB30 Power Analog Device Ground. Common return for all power.
(1) The following power supplies are required to operate the DMD: VCC, VCCI, VOFFSET, VBIAS, and VRESET. VSS must also be connected.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |