The DLP651NE DMD is part of a chipset that is controlled by the DLPC7540 display controller in conjunction with theTPS65145 PMIC and the DLPA100 power and motor controller. These guidelines are targeted at designing a PCB board with the DLP651NE DMD. The DMD board is a high-speed multi-layer PCB, with primarily high-speed digital logic including double data rate 3.2 Gbps and 250 Mbps differential data buses run to the DMD. TI recommends that full or mini power planes are used for V_OFFSET, V_RESET, and V_BIAS. Solid planes are required for ground (V_SS). The target impedance for the PCB is 50 Ω ±10% with exceptions listed in Table 10-1. TI recommends a 10 layer stack-up as described in Table 10-2. TI recommends manufacturing the PCB with a high quality FR-4 material.