ZHCSIA7 May 2018 DLPA4000
PRODUCTION DATA.
The resistor RLIM senses the LED current. Connect the RLIM _K_1 and RLIM _K_2 lines close to the high-side of measurement resistor RLIM to accurately measure the LED current. Connect the RLIM_BOT_K_1 pin and the RLIM_BOT_K_2 pin close to the high-side of measurement resistor RLIM.
The switched LED current flows through the RLIM resistor. Use a low-ohmic ground connection for RLIM .