米6体育平台手机版

ZHCSCU2E February 2014 – November 2020 DLPC3433 , DLPC3438

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

ZVB|176
- MPBGA38C

散热焊盘机械数据 (封装 | 引脚)

6.14 BT656 Interface General Timing Requirements

The DLPC34xx controller input interface supports the industry standard BT.656 parallel video interface⁽²⁾. See the appropriate ITU-R BT.656 specification for detailed interface timing requirements.

			MIN	MAX	UNIT
ƒ_clock	Clock frequency, PCLK		1.0	33.5	MHz
t_{p_clkper}	Clock period, PCLK	50% reference points	29.85	1000	ns
t_{p_clkjit}	Clock jitter, PCLK	Max ƒ_clock		See ⁽¹⁾
t_{p_wh}	Pulse duration low, PCLK	50% reference points	10.0		ns
t_{p_wl}	Pulse duration high, PCLK	50% reference points	10.0		ns
t_{p_su}	Setup time – PDATA(7:0) before the active edge of PCLK	50% reference points	3.0		ns
t_{p_h}	Hold time – PDATA(7:0) after the active edge of PCLK	50% reference points	0.9		ns
t_t	Transition time – all signals	20% to 80% reference points	0.2	3.0	ns

(1) Calculate clock jitter (in ns) using this formula: Jitter = [1 / ƒ_clock – 5.76 ns]. Clock jitter must maintain setup and hold times. BT.656 data bits must be mapped to the DLPC34xx PDATA bus as shown in Figure 6-9 shows BT.656 bus mode YCbCr 4:2:2 source PDATA (23:0) mapping.

(2) The BT.656 interface accepts 8 bits per color, 4:2:2 YCb/Cr data encoded per the industry standard through PDATA(7:0) on the active edge of PCLK (that is programmable). See Figure 6-9.

Figure 6-9 BT.656 Interface Mode Bit Mapping