This section defines the timing requirements for the external interfaces for the DLPC3437 controller.
Table 7-1 Supported Input Source RangesINTERFACE(1) | BITS / PIXEL (4) | IMAGE TYPE(2) | SOURCE RESOLUTION RANGE(3)(5) | FRAME RATE RANGE |
---|
HORIZONTAL | VERTICAL |
---|
LANDSCAPE | PORTRAIT | LANDSCAPE | PORTRAIT |
---|
Parallel | 24 | 2D - 1080p | 1920 | N/A | 1080 | N/A | 50 ± 2 Hz, 60 ± 2 Hz |
Parallel | 24 | 2D - WXGA | 1366 | N/A | 768 | N/A | 50 ± 2 Hz, 60 ± 2 Hz |
Parallel | 24 | 2D - 720p | 1280 | N/A | 720 | N/A | 50 ± 2 Hz, 60 ± 2 Hz |
Parallel | 24 | 3D - 720p | 1280 | N/A | 720 | N/A | 100 ± 2 Hz, 120 ± 2 Hz |
(1) The application must remain within specifications for all source interface parameters such as maximum clock rate and maximum line rate.
(2) The maximum DMD pixel display resolution is 1920x1080 while system actuator is enabled.
(3) To achieve the ranges stated, the firmware must support the source parameters. Review the firmware release notes or contact TI to determine the latest available frame rate and input resolution support for a given firmware image.
(4) Bits per pixel does not necessarily equal the number of data pins used on the DLPC34xx controller. Fewer pins are used if multiple clocks are used per pixel transfer.
(5) The DLPC3437 only supports Landscape orientation.