Many signals are available on multiple pins, according to the software configuration of the pin multiplexing options.

The following list describes the column headers:

1. SIGNAL NAME: The name of the signal passing through the pin.
   Note:

   Signal names provided in each Signal Descriptions table, (Table 6-1 through Table 6-106) represent the pin layer multiplexed signal function which is selected via the PADCONFIG registers. Device subsystems may provide an additional layer of signal multiplexing, which means the signal names described in these tables may have additional signal functions. For more information, see the respective peripheral chapter of the device TRM.

2. DESCRIPTION: Description of the signal
3. PIN TYPE: Signal direction and type:
   • I = Input
   • O = Output
   • OD = Opent drain terminal - Output
   • IO = Input or Output
   • IOD = Open drain terminal - Input or Output
   • IOZ = Input, Output or Three-state terminal
   • OZ = Output or Three-state terminal
   • A = Analog
   • PWR = Power
   • GND = Ground
   • CAP = LDO Capacitor
4. BALL: Associated balls bottom

   For more information on the I/O cell configurations, see Pad Configuration Registers section in Device Configuration chapter of the device TRM.