米6体育平台手机版

ZHCSQL7F May 2010 – May 2022 DRV8312 , DRV8332

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DDW|44
- MPDS309B

散热焊盘机械数据 (封装 | 引脚)

DDW|44
- PPTD165B

订购信息

6.1 Absolute Maximum Ratings

Over operating free-air temperature range unless otherwise noted⁽¹⁾

	MIN	MAX	UNIT
VDD to GND	–0.3	13.2	V
GVDD_X to GND	–0.3	13.2	V
PVDD_X to GND_X ⁽²⁾	–0.3	70	V
OUT_X to GND_X ⁽²⁾	–0.3	70	V
BST_X to GND_X ⁽²⁾	–0.3	80	V
Transient peak output current (per pin), pulse width limited by internal overcurrent protection circuit		16	A
Transient peak output current for latch shut down (per pin)		20	A
VREG to AGND	–0.3	4.2	V
GND_X to GND	–0.3	0.3	V
GND to AGND	–0.3	0.3	V
PWM_X, RESET_X to GND	–0.3	VREG + 0.5	V
OC_ADJ, M1, M2, M3 to AGND	–0.3	4.2	V
FAULT, OTW to GND	–0.3	7	V
Continuous sink current ( FAULT, OTW)		9	mA
Operating junction temperature, T_J	–40	150	°C
Storage temperature, T_stg	–55	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Section 6.3 is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) These are the maximum allowed voltages for transient spikes. Absolute maximum DC voltages are lower.