ZHCSDP9D October   2011  – April 2015 DS110DF410

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 典型应用图
  5. 5 修订历史记录
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Device Data Path Operation
      2. 8.3.2 Signal Detect
      3. 8.3.3 CTLE
      4. 8.3.4 DFE
      5. 8.3.5 Clock and Data Recovery
      6. 8.3.6 Output Driver
      7. 8.3.7 Device Configuration
        1. 8.3.7.1 Rate and Subrate Setting
    4. 8.4 Device Functional Modes
      1. 8.4.1 SMBus Master Mode and SMBus Slave Mode
      2. 8.4.2 Address Lines <ADDR_[3:0]>
      3. 8.4.3 SDA and SDC
      4. 8.4.4 Standards-Based Modes
        1. 8.4.4.1 Ref_mode 3 Mode (Reference Clock Required)
        2. 8.4.4.2 False Lock Detector Setting
        3. 8.4.4.3 Reference Clock In
        4. 8.4.4.4 Reference Clock Out
        5. 8.4.4.5 Driver Output Voltage
        6. 8.4.4.6 Driver Output De-Emphasis
        7. 8.4.4.7 Driver Output Rise/Fall Time
        8. 8.4.4.8 INT
        9. 8.4.4.9 LOCK_3, LOCK_2, LOCK_1, and LOCK_0
    5. 8.5 Programming
      1. 8.5.1  SMBus Strap Observation
      2. 8.5.2  Device Revision and Device ID
      3. 8.5.3  Control/Shared Register Reset
      4. 8.5.4  Interrupt Channel Flag Bits
      5. 8.5.5  SMBus Master Mode Control Bits
      6. 8.5.6  Resetting Individual Channels of the Retimer
      7. 8.5.7  Interrupt Status
      8. 8.5.8  Overriding the CTLE Boost Setting
      9. 8.5.9  Overriding the VCO Search Values
      10. 8.5.10 Overriding the Output Multiplexer
      11. 8.5.11 Overriding the VCO Divider Selection
      12. 8.5.12 Using the PRBS Generator
      13. 8.5.13 Using the Internal Eye Opening Monitor
      14. 8.5.14 Overriding the DFE Tap Weights and Polarities
      15. 8.5.15 Enabling Slow Rise/Fall Time on the Output Driver
      16. 8.5.16 Inverting the Output Polarity
      17. 8.5.17 Overriding the Figure of Merit for Adaptation
      18. 8.5.18 Setting the Rate and Subrate for Lock Acquisition
      19. 8.5.19 Setting the Adaptation/Lock Mode
      20. 8.5.20 Initiating Adaptation
      21. 8.5.21 Setting the Reference Enable Mode
      22. 8.5.22 Overriding the CTLE Settings Used for CTLE Adaptation
      23. 8.5.23 Setting the Output Differential Voltage
      24. 8.5.24 Setting the Output De-Emphasis Setting
    6. 8.6 Register Maps
      1. 8.6.1 Register Information
      2. 8.6.2 Bit Fields in the Register Set
      3. 8.6.3 Writing to and Reading from the Control/Shared Registers
      4. 8.6.4 Channel Select Register
      5. 8.6.5 Reading to and Writing from the Channel Registers
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 第三方米6体育平台手机版_好二三四免责声明
    2. 12.2 文档支持
      1. 12.2.1 相关文档
    3. 12.3 商标
    4. 12.4 静电放电警告
    5. 12.5 术语表
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5 修订历史记录

Changes from C Revision (January 2015) to D Revision

  • Updated Register 0x2F Values for Table 2Go
  • Updated descriptions for Address 2 in Table 16Go
  • Added "1: Enabled" and "0: Disabled" to description for Address D in Table 16Go
  • Added "(phase detector charge pump enabled)" and "(frequency detector charge pump enabled)" to description for Address 1B, Bit 1 and Bit 0, respectively, in Table 16Go
  • Added new content for Address 1F in Table 16Go
  • Updated descriptions for Address 30 in Table 16Go
  • Changed "ADAPT_MODE1" to "RESERVED" for Address 31 Bit 6 Field Name in Table 16Go
  • Changed "0" to "1" for Address 31 Bit 5 Default Value in Table 16Go

Changes from B Revision (May 2013) to C Revision

  • Added ESD 额定值表，特性描述部分，器件功能模式，应用和实施部分，电源相关建议部分，布局部分，器件和文档支持部分以及机械、封装和可订购信息部分Go
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |