米6体育平台手机版

ZHCSJA9B September 2005 – January 2019 DS90LV028AH

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

D|8
- MSOI002K

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Electrical Characteristics

Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.⁽¹⁾⁽²⁾

PARAMETER		TEST CONDITIONS		PIN	MIN	TYP	MAX	UNIT
V_TH	Differential Input High Threshold	V_CM = +1.2 V, 0 V, 3 V⁽⁴⁾		R_IN+, R_IN−			+100	mV
V_TL	Differential Input Low Threshold	V_CM = +1.2 V, 0 V, 3 V⁽⁴⁾			−100			mV
I_IN	Input Current	V_IN = +2.8 V	V_CC = 3.6 V or 0 V		−10	±1	+10	μA
		V_IN = 0 V	V_CC = 3.6 V or 0 V		−10	±1	+10	μA
		V_IN = +3.6 V	V_CC = 0 V		–20		+20	μA
V_OH	Output High Voltage	I_OH = −0.4 mA, V_ID = +200 mV		R_OUT	2.7	3.1		V
		I_OH = −0.4 mA, Inputs terminated			2.7	3.1		V
		I_OH = −0.4 mA, Inputs shorted			2.7	3.1		V
V_OL	Output Low Voltage	I_OL = 2 mA, V_ID = −200 mV				0.3	0.5	V
I_OS	Output Short Circuit Current	V_OUT = 0 V⁽³⁾			−15	−50	−100	mA
V_CL	Input Clamp Voltage	I_CL = −18 mA			−1.5	−0.8		V
I_CC	No Load Supply Current	Inputs Open		V_CC		5.4	9	mA

(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground unless otherwise specified (such as V_ID).

(2) All typicals are given for: V_CC = +3.3 V and T_A = +25°C.

(3) Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only. Only one output should be shorted at a time, do not exceed maximum junction temperature specification.

(4) V_CC is always higher than R_IN+ and R_IN− voltage. R_IN+ and R_IN− are allowed to have voltage range –0.05 V to +3.05 V. V_ID is not allowed to be greater than 100 mV when V_CM = 0 V or 3 V.