ZHCSNS2 December 2023 DS90LVRA2-Q1
PRODUCTION DATA
| 参数 | 测试条件 | 最小值 | 典型值 | 最大值 | 单位 | |
|---|---|---|---|---|---|---|
| VITH | 差分输入高阈值 | VIB = -4V 或 5V，VCC = 1.62V 至 3.6V | 100 | mV | ||
| VITL | 差分输入低阈值 | -100 | ||||
| VHYS | 差分输入电压迟滞，VIT1 – VIT2 | VCC = 1.62V 至 3.6V | 20 | 40 | 120 | mV |
| VCM_RANGE | 输入共模电压范围 | VCC = 1.62V - 1.98V | -1 | 1.2 | 2 | V |
| VCC = 2.3V - 2.7V | -2.5 | 1.2 | 3 | V | ||
| VCC = 3.0V - 3.6V | -4 | 1.2 | 5 | V | ||
| VOH | 高电平输出电压 | IOH = –4mA，VCC = 1.8V ± 10% | 1.3 | V | ||
| IOH = –4mA，VCC = 2.5V ± 10% | 1.8 | V | ||||
| IOH = –4mA，VCC = 3.3V ± 10% | 2.6 | V | ||||
| VOL | 低电平输出电压 | IOL = 4mA，VCC = 1.8V ± 10% | 0.2 | V | ||
| IOL = 4mA，VCC = 2.5V ± 10% | 0.3 | V | ||||
| IOL = 4mA，VCC = 3.3V ± 10% | 0.4 | V | ||||
| ICC_ACTIVE | 电源电流 | VCC = 3.6V，空载，稳态，VID=200mV/-200mV | 25 | mA | ||
| VCC = 2.7V，空载，稳态，VID=200mV/-200mV | 25 | mA | ||||
| VCC = 1.98V，空载，稳态，VID=200mV/-200mV | 25 | mA | ||||
| II | 输入电流 （A 或 B 输入） |
VI = -1.0V，其他输入开路 | ±35 | µA | ||
| VI = 2.4V，其他输入开路 | ±20 | µA | ||||
| VI = –4V，其他输入开路（在 85℃ 时分频）(±80μA) | ±120 | µA | ||||
| VI = 5V，其他输入开路 | ±40 | µA | ||||
| II(OFF) | 断电输出电流 （Y 或 Z 输出） |
VY 或 VZ = 1.98V，VCC = 0V | ±20 | µA | ||
| II(OFF) | 断电输入电流 （A 或 B 输入） |
VA 或 VB = -1V 或 2.0V，VCC = 0V | ±30 | µA | ||
| VA 或 VB = –4 或 5V，VCC = 0V | ±70 | µA | ||||
| VA 或 VB = 0V 或 2.4V，VCC = 0V | ±30 | µA | ||||