ZHCSMR4A november 2020 – november 2020 DS90UB662-Q1
PRODUCTION DATA
The general configuration register enables and disables high level block functionality.
| BIT | FIELD | TYPE | DEFAULT | DESCRIPTION |
|---|---|---|---|---|
| 7:6 | RESERVED | - | 0x0 | Reserved |
| 5 | I2C_MASTER_EN | R/W | 0 | I2C Master Enable When this bit is 0, the local I2C master is disabled, when it is 1, the master is enabled. |
| 4 | OUTPUT_EN_MODE | R/W | 1 | Output Enable Mode If set to 0, the CSI-2 TX output port is forced to the high-impedance state if no assigned RX ports have an active Receiver lock. If set to 1, the CSI-2 TX output port will continue in normal operation if no assigned RX ports have an active Receiver lock. CSI-2 TX operation will remain under register control via the CSI_CTL register for each port. If no assigned RX ports have an active Receiver lock, this will result in the CSI-2 Transmitter entering the LP-11 state. |
| 3 | OUTPUT_ENABLE | R/W | 1 | Output Enable Control (in conjunction with Output Sleep State Select) If OUTPUT_SLEEP_STATE_SEL is set to 1 and this bit is set to 0, the CSI-2 TX outputs is forced into a high impedance state. |
| 2 | OUTPUT_SLEEP _STATE_SEL | R/W | 1 | OSS Select to control output state when LOCK is low (used in conjunction with Output Enable) When this bit is set to 0, the CSI-2 TX outputs is forced into a HS-0 state. |
| 1 | RX_PARITY _CHECKER_EN | R/W | 1 | FPD3 Receiver Parity Checker Enable When enabled, the parity check function is enabled for the FPD3 receiver. This allows detection of errors on the FPD3 receiver data bits. 0: Disable 1: Enable |
| 0 | FORCE_REFCLK_DET | R/W | 0 | Force indication of external reference clock 0: Normal operation, reference clock detect circuit indicates the presence of an external reference clock 1: Force reference clock to be indicated present |