ZHCSTC7A September   2000  – January 2024 INA114

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Pin Configuration and Functions
  6. Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. Application and Implementation
    1. 6.1 Application Information
      1. 6.1.1 Setting the Gain
      2. 6.1.2 Noise Performance
      3. 6.1.3 Offset Trimming
      4. 6.1.4 Input Bias Current Return Path
      5. 6.1.5 Input Common-Mode Range
      6. 6.1.6 Input Protection
      7. 6.1.7 Output Voltage Sense (SOIC-16 Package Only)
  8. Typical Applications
  9. Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 静电放电警告
    5. 8.5 术语表
  10. Revision History
  11. 10Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • P|8
  • DW|16
散热焊盘机械数据 (封装 | 引脚)
订购信息

Noise Performance

The INA114 provides very low noise in most applications. For differential source impedances less than 1kΩ, the INA103 can provide lower noise. For source impedances greater than 50kΩ, the INA111 FET-input instrumentation amplifier can provide lower noise.

Low frequency noise of the INA114 is approximately 0.4µVPP measured from 0.1Hz to 10Hz. This noise is approximately one-tenth the noise of low noise chopper-stabilized amplifiers.