米6体育平台手机版

ZHCSU20A November 1996 – February 2024 INA132

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

散热焊盘机械数据 (封装 | 引脚)

订购信息

5.5 Electrical Characteristics: V_S = ±15V

at T_A = 25°C, V_S = ±15V, R_L = 10kΩ, V_REF = 0V, V_CM = V_S/2, and G = 1 (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
INPUT
V_OS	Offset voltage⁽¹⁾	RTO	INA132		±75	±250	µV
V_OS	Offset voltage⁽¹⁾	RTO	INA132A		±75	±500	µV
	Offset voltage drift⁽¹⁾	RTO, T_A = –40°C to +85°C	INA132		±1	±5	µV/°C
	Offset voltage drift⁽¹⁾	RTO, T_A = –40°C to +85°C	INA132A		±1	±10⁽⁴⁾	µV/°C
	Long-term stability⁽¹⁾				±0.3		µV/mo
PSRR	Power-supply rejection ratio⁽¹⁾	RTO, V_S = ±1.35V to ±18V			±5	±30	µV/V
V_CM	Common-mode voltage	V_O = 0V		(V–)		2(V+) – 2	V
CMRR	Common-mode rejection	V_CM = –15V to +28V, R_S = 0Ω	INA132	76	90		dB
CMRR	Common-mode rejection	V_CM = –15V to +28V, R_S = 0Ω	INA132A	70	90		dB
	Differential input impedance⁽²⁾				80		kΩ
	Common-mode input impedance⁽²⁾				80		kΩ
NOISE
e_N	Voltage noise⁽³⁾	RTO, f_B = 0.1Hz to 10Hz			1.6		µV_PP
e_N	Voltage noise⁽³⁾	RTO, f = 1kHz			75		nV/√Hz
GAIN
	Gain				1		V/V
GE	Gain error	V_O = –14V to +13.5V	INA132		±0.01	±0.075	%
GE	Gain error	V_O = –14V to +13.5V	INA132A		±0.01	±0.1	%
	Gain error drift⁽⁴⁾	T_A = –40°C to +85°C			±1	±10	ppm/°C
	Gain nonlinearity	V_O = –14V to +13.5V	INA132		±0.0001	±0.001	% of FSR
	Gain nonlinearity	V_O = –14V to +13.5V	INA132A		±0.0001	±0.002	% of FSR
OUTPUT
	Positive output voltage swing	R_L= 100kΩ		(V+) – 1	(V+) – 0.8		V
	Positive output voltage swing	R_L= 10kΩ		(V+) – 1.5	(V+) – 0.8		V
	Negative output voltage swing	R_L= 100kΩ		(V–) + 0.5	(V–) + 0.15		V
	Negative output voltage swing	R_L= 10kΩ		(V–) + 1	(V–) + 0.25		V
C_L	Load capacitance	Stable operation			10000		pF
I_SC	Short-circuit current	Continuous to V_S / 2			+6/–15		mA
FREQUENCY RESPONSE
BW	Small signal bandwidth, –3dB				300		kHz
SR	Slew rate				0.1		V/µs
t_S	Settling time	V_O = 10V step	0.1%		85		µs
t_S	Settling time	V_O = 10V step	0.01%		88		µs
	Overload recovery time	50% input overdrive			7		µs
POWER SUPPLY
I_Q	Quiescent current	V_IN = 0V			±175	±230	µA

(1) Includes effects of amplifier input bias and offset currents.

(2) 40kΩ resistors are ratio matched but have ±20% absolute value.

(3) Includes effects of amplifier input current noise and thermal noise contribution of resistor network.

(4) Specified by wafer test to 95% confidence level.

封装选项

机械数据 (封装 | 引脚)

散热焊盘机械数据 (封装 | 引脚)

订购信息

5.5 Electrical Characteristics: VS = ±15V

5.5 Electrical Characteristics: V_S = ±15V