The INA190-EP is in normal operation when the following conditions are met:

• The power-supply voltage (V_S) is between 1.7 V and 5.5 V.
• The common-mode voltage (V_CM) is within the specified range of –0.2 V to +40 V.
• The maximum differential input signal times the gain plus V_REF is less than the positive swing voltage V_SP.
• The ENABLE pin is driven or connected to V_S.
• The minimum differential input signal times the gain plus V_REF is greater than the zero load swing to GND, V_ZL (see the Section 7.3.7 section).

During normal operation, this device produces an output voltage that is the amplified representation of the difference voltage from IN+ to IN– plus the voltage applied to the REF pin.