Connect the input pins to the sensing resistor using a Kelvin or 4-wire connection. This connection technique makes sure that only the current-sensing resistor impedance is detected between the input pins. Poor routing of the current-sensing resistor commonly results in additional resistance present between the input pins. Given the very low ohmic value of the current resistor, any additional high-current carrying impedance can cause significant measurement errors.
Place the power-supply bypass capacitor as close as possible to the device power supply and ground pins. The recommended value of this bypass capacitor is 0.1 µF. To compensate for noisy or high-impedance power supplies, add more decoupling capacitance.
When routing the connections from the current-sense resistor to the device, keep the trace lengths as short as possible. Place input filter capacitor CF as close as possible to the input pins of the device.